User Guide: Connect Receiver

PPM, sum signal receiver (one wire)

To connect a sum signal receiver, you have to select PPM. Receiver have to be connected to first input. Thart's the best way, its easy and you have more flexibility to connect additional Hardware (Flex-Port).

PWM, standard receiver (channel to channel)

To connect a standard receiver, you have to select PWM.

SUMD, proprietary Graupner protokoll.

Works with a UART.

S.Bus

set the UART to S.Bus in the BOARD tab and input type to S.Bus in INPUT tab
Quanton: UART2
Revo: Main Port*

Receiver list

the following list is not exclusive, it is very likely that any Rx will work at least in PWM mode

Make	Type	Mode
Jeti	Rsat/Rsat2	PPM, first input, switch to PPM9 please, PPM16 doesn't work!
Jeti	R4/5/6/7/8/9	PWM, inputs 1 to 8, be aware, some another functions are disabled!
Graupner	HoTT	PWM, inputs 1 to x, PPM (SUMO) to the last channel ( GR12 - Ch6, GR16 - CH8, .. ), SUMD to the last channel like PPM.
Spectrum	Satelite	?? TODO
FrSky	D4R-II	PWM, PPM (8 ch)
FrSky	D8R-XP	PWM, PPM (8 ch)
FrSky	X6R	PWM, S.Bus (16 ch)*
FrSky	X8R	PWM, S.Bus (16 ch)*

*currently, S.Bus does not work with Revo because of a software bug