CorEssentials is an open source corexy 3D printer.
- Bed Leveling: Hardware bed leveling with 3 independent motors
- HEPA-Filter
- support for Dual Extrusion with E3D Chimera AQUA
- water cooling with Alphacool Eisbaer Solo
- 40mm more z-height
- better idler mount for xy motion
- better belt Tensioner for z-axis
- improved direct drive Tool Head with quick-swab hotends
- drag chain for xy gantry
- Built Volume: 250 mm x 250 x mm x 300 mm
- Hotend: E3D V6 0.4mm (Bowden)
- Extruder: Bondtech BMG
- Bed Leveling: Hardware bed leveling with 3 independent motors
- Built Plate: Magnetic Spring Steel with PEI or Pertinax
- Heated Bed: 230V, 600W silicone heater up to 120°C
- Connectivity: 7" Touchscreen, USB and Ethernet
- Filament runout sensor
- Enclosure: Completely enclosed print volume with active temperature regulation and passive heated chamber (through heated bed)
- LED illumination
- Open for all Filament
- Filament Diameter: 1.75mm
- Supported Filament: ABS, ASA, PC, Nylon, PETG, PLA, PP, HIPS and much more // carbon and particle filled filaments possible with different toolhead
- Controller: Duet 2 Maestro with a total of 7 stepper drivers
- Heated bed: KEENOVO 230V 600W heater
- Power Supply: Meanwell 24V 10A
- Coldend cooling: 2510 axial fan OR Alphacool Eisbaer Solo (for dual extrusion)
- Part cooling: 2x 3510 blower fan OR single 4010 (for dual extrusion)
- Chamber filtration: 6025 axial fan
- Electronics cooling: 2x 6025 axial fan
- Linear Motion: CE MGN9H for xy gantry and 10mm rods for z
- Belt driven z axis
- Completely open source: all Fusion 360 files and .stp assembly available
Find the Fusion360 model for your viewing/download pleasure here:
