CorEssentials is an open source corexy 3D printer. This printer combines the best of the most popular 3D printers:
Voron V1.8 / V2.4 by VoronDesign: https://vorondesign.com/
HevoRT https://hevort.com/
Railcore https://railcore.org/
VZBot https://grabcad.com/library/vzbot-1
supported by https://www.cr-3d.de
- Built Volume: 310 mm x 310 x mm x 310 mm
- Frame: Built from 2040, 2020 and 3030 Aluminium Extrusion
- Hotend: Trianglelab Dragon (0.4mm)
- Extruder: CR3D NanoXtruder
- Bed Leveling: Hardware bed leveling with 2 independent motors
- Built Plate: Magnetic Spring Steel with PEI or Pertinax
- Heated Bed: 230V, 800W silicone heater up to 120°C
- Connectivity: 7" Touchscreen, Wifi
- Filament runout sensor (Prusa Mini)
- Enclosure: Completely enclosed print volume with active temperature regulation and passive heated chamber (through heated bed)
- LED illumination
- Open for all Filament
- Filament Diameter: 1.75mm
- Supported Filament: ABS, ASA, PC, Nylon, PETG, PLA, PP, HIPS and much more // carbon and particle filled filaments possible with different toolhead
- Controller: Duet Mini 5+
- Power Supply: Meanwell 24V 10A, second PSU for High Voltage Stepper Drivers possible
- Coldend cooling: 3010 axial fan
- Part cooling: 1x 4020 blower fan
- Chamber fan & filtration: 6010 blower fan
- Electronics cooling: 2x 6015 axial fan
- Linear Motion: CE MGN9H for xy gantry and 8mm rods for z
- Completely open source: all Fusion 360 files and .stp assembly available
Find the Fusion360 model for your viewing/download pleasure here (you can download the F360 model through this link as well):
