Skip to content

Ten-Mega-Pixel Snapshot Compressive Imaging with A Hybrid Coded Aperture

Notifications You must be signed in to change notification settings

zhihongz/HCA-SCI

Repository files navigation

10 Mega Pixel Snapshot Compressive Imaging with A Hybrid Coded Aperture (HCA-SCI)

This repository contains the Python (PyTorch) code for our paper 10 Mega Pixel Snapshot Compressive Imaging with A Hybrid Coded Aperture by Zhihong Zhang*, Chao Deng*, Yang Liu, Xin Yuan, Jinli Suo, and Qionghai Dai. [doi] [github] [arXiv]

The initial Python code for PnP-SCI was from Yang Liu and Dr. Xin Yuan.

HCA-SCI

In this paper, we build a novel hybrid coded aperture snapshot compressive imaging (HCA-SCI) system by incorporating a dynamic liquid crystal on silicon and a high-resolution lithography mask. We further implement a PnP reconstruction algorithm with cascaded denoisers for high quality reconstruction. Based on the proposed HCASCI system and algorithm, we achieve a 10-mega pixel SCI system to capture high-speed scenes, leading to a high throughput of 4.6G voxels per second. Both simulation and real data experiments verify the feasibility and performance of our proposed HCA-SCI scheme.

Football_256_Cr20

Schematic diagram

The aperture of the system (i.e. the activate area of the LCoS) can be divided into several sub-apertures according to the resolution of the LCoS after pixel binning, and each sub-aperture corresponds to a light beam propagating towards certain directions. As shown in the figure below, because the lithography mask is placed in front of the image plane, when different sub-apertures are turned on, the light beams from the corresponding sub-apertures will project the mask onto different parts of the image plane, which can thus generate corresponding shifting encoding masks. In practice, to enhance the light throughput, multiple sub-apertures will be turned on simultaneously in one frame by assigning the LCoS with a specific multiplexing pattern to obtain a single multiplexing encoding mask. And in different frames, different combinations of the sub-apertures are applied to generate different multiplexing encoding masks. Generally, we turn on 50% of the sub-apertures in one multiplexing pattern. In this multiplexing case, the final encoding mask on the image plane will be the summation of those shifting masks provided by the corresponding sub-apertures.

mask_gen

System implementation

The hardware setup of our HCA-SCI system is depicted in the figure below. The incident light from a scene is first collected by the primary lens and focused at the first virtual image plane. Then a 4f system consisting of two achromatic doublets transfers the image through the aperture coding module and the lithography mask, and subsequently onto the second virtual image plane. The aperture coding module positioned at the middle of the 4f system is composed of a polarizing beamsplitter, two film polarizers and an amplitude-modulated LCoS, which are used to change the open-close states ('open' means letting the light go through while 'close' means blocking the light) of the sub-apertures and thus modulate the light's propagation direction. Finally, the image delivered by the 4f system is relayed to the camera sensor being captured. Note that the 4f system used in our system has a magnification of 1, and the relay lens has a magnification of 2, which on the whole provides a 1:2 mapping between pixels of the lithography mask and the sensor. During the acquisition process, the camera shutter is synchronized with the LCoS by using an output trigger signal from the LCoS driver board.

system

Usage

This code is tested on Windows 10 CUDA 10.0.130, CuDNN 7.6.0, and PyTorch 1.2.0. It is supposed to work on other platforms (Linux or Windows) with CUDA-enabled GPU(s).

  1. Download the dataset from BaiduDisk and put it into ./dataset.
  2. Create the virtual environment with required Python packages via
    conda env create -f environment.yml
  3. Run pnp_sci_video_data_simuexp_test.py to test the simulated data.
  4. Run pnp_sci_video_data_realexp_test.py to test the real data.

More information

Citation

@article{10mega_sci,
author = {Zhihong Zhang and Chao Deng and Yang Liu and Xin Yuan and Jinli Suo and Qionghai Dai},
journal = {Photon. Res.},
keywords = {Coded aperture imaging; Compressive imaging; Digital micromirror devices; Imaging systems; Machine vision; Reconstruction algorithms},
number = {11},
pages = {2277--2287},
publisher = {OSA},
title = {Ten-mega-pixel snapshot compressive imaging with a hybrid coded aperture},
volume = {9},
month = {Nov},
year = {2021},
url = {http://www.osapublishing.org/prj/abstract.cfm?URI=prj-9-11-2277},
doi = {10.1364/PRJ.435256}
}

About

Ten-Mega-Pixel Snapshot Compressive Imaging with A Hybrid Coded Aperture

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published