TL;DR - run CentOS 7 virtual machine as a container
docker run --privileged -v ~/.ssh/id_rsa.pub:/tmp/id_rsa.pub:ro --name centos7 -d -t docker.io/virtainers/centos:7
IP=$(docker inspect centos7 -f "{{ .NetworkSettings.IPAddress }}")
docker logs centos7 # use to see when virtual machine is up, usually about a minute
ssh centos@$IP
# PROFIT! you're inside a virtual machine- Virtainers
- Table of Contents
We have two main isolation ways - it's virtualization and containerization. But what we don't have, it's simplicity, easy distribution and orchestration of containers with possibilities to deploy different operation systems of virtualization.
Virtainers are coming to solve this problem and provide easy deployment of isolated environment - virtual machine inside a container, which allows to run any OS and enjoy of all containerization advantages and tools.
For example you have a bare Jenkins slave, which runs Ubuntu 12.04 and you need to test your application or deployment scripts on Fedora, and your deployment scripts includes starting a Docker service via systemd, running there containers and restarting services.
There are systemd enabled containers, but when it comes to deal with restarts of Docker service inside and running containers it turns to total mess with bunch of hacks and non obvious solutions. And what if we want to test something network related? This complicates things even more.
That's why the solution could be running a "virtainer".
Actually virtainer requires from host the same what can require a libvirt service - enabled virtualization option. But you don't need to deal with any virtualization framework, tools, service like Vagrant, VirtualBox, VMWare or libvirt/KVM, just a container - docker or podman installed. It will allow you to run VM in one simple command without dealing with any dependencies, additional packages, repositories, etc etc. It also allows you to provide a configured VM to any of your team members or even to publish it. You can publish your changes to virtual machine and everyone who use them with virtainer will have the exactly same VM as you. It's only matter of publishing one file, which includes all changes you made for the VM from its start.
We support two containers engines - it's docker and podman. Podman is supported with "sudo" - not rootless containers. Usually the difference comes when we set up a special networking for virtainers, podman doesn't have network related command options, so it's done differently. When running just virtainer on the host connected to internal network, you can easily replace "docker" by "sudo podman" and have the same experience.
Currently we provide one generic virtainer that can pick up any cloud image you set for it and ready virtainers that already include the image inside:
- Fedora 29
- Fedora 30
- CentOS 7
- Ubuntu 18.04
Others could be added easily.
We need to run docker in privileged mode: --priveleged, nothing more special is required. Also you need to add
-t option to add a terminal, so you can see logs of VM starting.
So if we run a virtual machine, we most likely would like to inject a specific data there, either SSH keys or some
more advanced pre-configuration of the host. We use cloud images for virtainers to run VM from, so it supports
cloud-init. You can pass any preconfigured cloud-init file and virtainer will inject it to VM.
The options are as following:
- If you map your SSH key to
/tmp/id_rsa.pub keylike-v ~/.ssh/id_rsa.pub:/tmp/id_rsa.pub:rothen virtainer will inject your SSH key into virtual machine and you can SSH to it with a default image user. Usually it's:
fedora- for all Fedora VMscentos- for all CentOS VMscloud-user- for all RHEL VMsubuntu- for all Ubuntu VMs Please find out username of your cloud image if you use a generic virtainer.
- If you have your user-data in cloud-config format,
then mount it to
/tmp/user-datainside the container, like-v /path/to/my/user-data:/tmp/user-data, and virtainer will pick it up. - If you have your own meta-data file, you can mount it to
/tmp/meta-datafile inside a container, like-v /path/to/my/meta-data:/tmp/meta-dataand virtainer will pick it up. Otherwise it will be generated for you automatically using parameteresinstance-id: localimage-01andlocal-hostname: cloudimage. - If you have your own prepared cloud-init.iso file with required user-data and meta-data inside, just mount it to
/tmp/cloud_init.isoinside the container as-v /path/to/my/cloud_init.iso:/tmp/cloud_init.iso. - And finally, if you don't specify anything, container will run with password
password, you can enter it by SSH or console. (Try not to use this option because of security risks!)
Currently there are parameters which could be customized via environment variables:
- RAM of virtual machine in MB -
$RAM(default:1024) - Virtual machine name -
$VM_NAME(default:vm) - Number of CPUs -
$CPU(default:1) - OS variant -
$OS_VARIANT(default:rhel7) - Internal path for diff image (see Persistent data section) -
$IMAGE_DIR(default:/mounted) - Internal path for cloud-init ISO disk -
$CLOUD_INIT_DISK(default:/cloud_init.iso)
For running virtainer with 4GB RAM and 2 CPUs run as:
docker run -e RAM=4096 -e CPU=2 --privileged -v ~/.ssh/id_rsa.pub:/tmp/id_rsa.pub:ro --name fedora29 -d -t docker.io/virtainers/fedora:29Virtual machine is running using libvirt/KVM, so you can also enter the console:
docker exec -it virtainer_name virsh console --force vm.
For your convinience there are scripts in root dir of repo to run virtainers:
When each one starts the virtual machine according to its name.
run-generic.sh script will run a virtual machine with your image, just export IMAGE_URL (url of cloud image) or
IMAGE (path to image): IMAGE=/path/to/image ./run-generic.sh or IMAGE_URL=http://url/to/image ./run-generic.sh.
Virtainers use backing image as base image for running OS and all diff will be written to different file
($IMAGE_DIR which is by default /mounted). By mounting $IMAGE_DIR to a local path on your host you'll get
local_image.qcow2 file with diff that you can use later to restore virtual machine state.
For example:
docker run --privileged -v ~/.ssh/id_rsa.pub:/tmp/id_rsa.pub:ro -v /tmp/data_folder:/mounted -d -t --name fedora29 docker.io/virtainers/fedora:29
IP=$(docker inspect fedora29 -f "{{ .NetworkSettings.IPAddress }}")
ssh fedora@$IP
# now let's install some additional package for example
sudo dnf install -y vim
# when package is installed, exit
exit
# remove the containers completely
docker rm -f fedora29
# Let's check we have diff image in our host
ls /tmp/data_folder
# Now let's run a new container
docker run --privileged -v ~/.ssh/id_rsa.pub:/tmp/id_rsa.pub:ro -v /tmp/data_folder:/mounted -d -t --name new-fedora29 docker.io/virtainers/fedora:29
IP=$(docker inspect new-fedora29 -f "{{ .NetworkSettings.IPAddress }}")
ssh fedora@$IP
# Check that packge is installed
rpm -qa | grep vimLocal diff image will contain everything you did on virtual machine and is ready to be picked up when you run a new virtainer. It could be easily distributed, relocated, etc. But important: it will work only if you have the same version of backing image!
Nothing special is required. Virtainers can connect each to other as usual:
ssh [email protected]
ping 172.17.0.2
PING 172.17.0.2 (172.17.0.2) 56(84) bytes of data.
64 bytes from 172.17.0.2: icmp_seq=1 ttl=62 time=1.43 ms
64 bytes from 172.17.0.2: icmp_seq=2 ttl=62 time=0.301 ms
64 bytes from 172.17.0.2: icmp_seq=3 ttl=62 time=0.903 ms
In case you want to run a docker inside a virtual machine of virtainer, you'll need to use a different network. The
problem appears when docker installs its default docker0 interface with 172.17.0.1/16. While outer network of
virtainer is also from this subnet, if you run it by default. Packets to outer world won't go from virtual machine and
network connectivity will break. To prevent this, if you plan to run docker inside a virtainer, create a different
network for virtainers:
docker network create -d bridge --subnet=172.28.100.0/24 --ip-range=172.28.100.0/24 --gateway=172.28.100.1 virtual
docker run --privileged --name fedora29 -d -t --network=virtual docker.io/virtainers/fedora:29That way you don't need to care about overlapping of docker networks inside and outside of virtainer. To discover an IP
of container just run docker inspect fedora29 -f "{{ .NetworkSettings.Networks.virtual.IPAddress }}" where
virtual is your network name from previous step.
You also can play with IP ranges, for example if creating network like that:
docker network create -d bridge --subnet=172.28.100.0/24 --ip-range=172.28.100.2/32 --gateway=172.28.100.1 feels_aloneYou will have only one posible IP which is 172.28.100.2, so you don't even need to inspect container for finding an IP.
Another way to run a container with well known IP is just to set it in command line:
docker run --privileged -v ~/.ssh/id_rsa.pub:/tmp/id_rsa.pub:ro --name fefora -d -t --ip 172.28.100.10 --network=virtual docker.io/virtainers/fedora:29Pay attention that specifying IP address works with custom networks only, not for default one (172.17.0.0/16)
The same problem as docker has (see section above) exists in podman setup. Podman creates interface cni0 with IP
address 10.88.0.1/16 and if you run podman in virtainer which ran by podman (not confusing at all) then networks
will overlap and connectivity will break. So we need to do the same as we did with docker above - to create on our host
a different network for podman. How to do it?
Podman uses CNI networking and it's usually defined in /etc/cni/net.d, for example in file
/etc/cni/net.d/87-podman-bridge.conflist. Let's edit it:
sudo vim /etc/cni/net.d/87-podman-bridge.conflist
If we want just change default network for podman, let's replace it with a new one (then we don't need to set network
options in podman command line). Replace cni0 name of interface, which most likely already exists with cni1 for
example. Also change network range from "subnet": "10.89.0.0/16" to something different like
"subnet": "10.99.0.0/16". After then make sure you don't run any containers in previous network:
sudo podman rm -f -a. Then you can delete old cni0 interface by: sudo ip link del cni0. When you run podman
now, the new interface cni1 will be created on the fly and container will have address from a new IP range. Voila!
Using a custom network is strongly recommended while using virtainers to prevent possible clashes and networks overlaps.
Straight through approach will be creating a container network with IP range of external network, then running a
container with assigning IP of this network. The only danger here is overlapping with main network and using same IP for
multiple hosts. Better to use a narrower prefix for IP subnet of container network and limit DHCP range of main network
to avoid an overlapping.
For example your have 192.168.2.0/24 external DHCP network and you excluded addresses higher than 192.168.2.200 from
DHCP. Then let's create a subnet /27:
docker network create --ip-range 192.168.2.224/27 --attachable --gateway 192.168.2.225 --subnet 192.168.2.224/27 externalnetYou'll get bridge interface on your host 192.168.2.225 which will be a gateway for virtainers from 192.168.2.224/27
network.
$ ip a | grep 192.168.2.
inet 192.168.2.160/24 brd 192.168.2.255 scope global dynamic noprefixroute eth0
inet 192.168.2.225/27 scope global br-315eaa8b9537Now we can run a virtainer in this network:
docker run -d -t --name netcontainer --privileged -v ~/.ssh/id_rsa.pub:/tmp/id_rsa.pub:ro --network externalnet docker.io/virtainers/fedora:30Inside a container we'll have IP address from our range 192.168.2.224/27:
/ $ ip add
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
...
150: eth0@if151: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP
link/ether 02:42:c0:a8:02:e2 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.226/27 scope global eth0
...Let's see route table and traceroute:
/ $ ip route
default via 192.168.2.225 dev eth0
192.168.2.224/27 dev eth0 scope link src 192.168.2.226
/ $ traceroute google.com
traceroute to google.com (172.217.169.14), 30 hops max, 46 byte packets
1 192.168.2.225 (192.168.2.225) 0.019 ms 0.008 ms 0.005 ms
2 192.168.2.1 (192.168.2.1) 0.289 ms 0.350 ms 0.332 ms
3 126-120-87-11 (126.120.87.11) 0.776 ms 0.660 ms 0.556 ms
...So we can see that packet from container goes to host interface 192.168.2.225, then to network
gateway that is defined on the host machine 192.168.2.1 and continues its way to the destination.
We also can connect to containers IP 192.168.2.226 from any server in the 192.168.2.0/24 network.
If you can't, try to add a route:
sudo ip route add 192.168.2.226 via 192.168.2.225or for whole subnet:
sudo ip route add 192.168.2.224/27 via 192.168.2.225Make sure your firewall on the host allows connection. Possibly you'll need to set your interface on the host to promiscuous mode:
ip link set eth0 promisc onThe most important to know here is that now your containers VM is opened to external network, please take into account possible security issues. This is recommended only for test environments with internal non-routable IP ranges.
Another option will be defining macvlan networks.
docker network create -d macvlan --subnet=192.168.2.0/24 --gateway=192.168.2.1 --ip-range=192.168.2.224/27 -o parent=eth0 macvlan_externalAlthough we defined an existing subnet, we limited ip range to narrow subnet 192.168.2.224/27. Now we can start virtainers
as usual:
docker run -d -t --privileged --name netcontainer --network macvlan_external docker.io/virtainers/centos:7It's possible that you still need to enable promiscuous mode in the interface. Also it's not possible to connect to container from the same host. But you can connect from other hosts on the network or for example assign an additional IP on the interface and connect from it.
- Installation of virtual machine with virtainer won't require anything to be installed on the host, except docker or podman, it significantly simplifies workflow and make them lighter and shorter.
- Continuous integration could be easier when using quick to setup and remove virtual machines, also it can use current containers plugin or orchestration tools. Virtainers could be managed by any usual for you container management tool.
- Orchestration of virtual machines can use now advanced practices from containers world, like Kubernetes for example.
Tell us about another ideas and use cases it can be helpful for you.
What is the roadmap:
- Create Linux containers with X window, running VNC on startup.
- Create a nice python script that will manage all command options.
- Create an API.
- Create by default networks of docker or podman for virtainers. ...