oozone

Simple zone management for OmniOS.

Written purely to scratch my own itch. I'm making no attempt at compatability with other Illumos distributions, or Solaris.

Zone Defintions

Zones are defined in YAML files. There's a simple and (hopefully) obvious mapping from YAML to a zone config file. For instance:

---
brand: sparse
zonepath: /zones/example
autoboot: true
fs:
  - dir: /home
    special: /home
    type: lofs
  - dir: /storage
    special: /storage
    type: lofs
net:
  - physical: test0
    'global-nic': auto
    'allowed-address': 192.168.1.38/24
    'defrouter': 192.168.1.1
dns:
  domain: localnet
  nameserver:
    - 192.168.1.26
    - 192.168.1.1

Compiles to:

create -b
set brand=sparse
set zonepath=/zones/example
set autoboot=true
add fs
set dir=/home
set special=/home
set type=lofs
end
add fs
set dir=/storage
set special=/storage
set type=lofs
end
add net
set physical=test0
set global-nic=auto
set allowed-address=192.168.1.38/24
set defrouter=192.168.1.1
end
add attr
set name=dns-domain
set type=string
set value=localnet
end
add attr
set name=resolvers
set type=string
set value=192.168.1.26,192.168.1.1
end

You can add extra information to the YAML file. The following extras are supported, and they happen in this order.

DNS Configuration

Add a block like this to your zone definition. All keys are optional. Things like sortlist will work if you add the list as an array.

dns:
  domain: localnet
  search: localnet
  nameserver:
    - 192.168.1.26
    - 192.168.1.1

Packages

You can ask oozone to install packages once the zone is created. Add the packages is the key with a list of FMRIs.

packages:
  - 'ooce/runtime/ruby-26'

Puppet Integration

If you use Puppet, like I do, you can add a facts hash. The facts will end up in /etc/factor/facts.d/basic_facts.txt. If this file is created, oozone adds in a zbrand fact, which I need for my stuff. (So far as I can tell, you can't get the real brand of a zone from inside it. pkgsrc, sparse, ipkg etc all report as native.)

facts:
  role: wavefront-proxy
  environment: lab

Upload Files

The upload key lets you give a list of files and/or directories which will be copied into the zone. The key is the source file in the global zone, the value is the destination inside the zone.

upload:
  /etc/release: /var/tmp/etc/release
  /etc/passwd: /passwd

Running Commands

Use the run_cmd key to add a list of commands you want to run in the zone once installation is complete. The commands are run via zlogin(1), so their context is inside the zone.

run_cmd:
  - '/opt/ooce/bin/gem install puppet -v 5.5.0 --no-document --bindir=/opt/ooce/bin'
  - '/opt/ooce/bin/puppet agent -t'

Commands

oozone does not perform any privilege escalation on your behalf. So, you must run it as root or with a profile which allows zone creation and arbitrary file writing. Running with a non-zero EUID will issue a warning and give you three seconds to hit CTRL-C and abort.

Create

oozone create [-F] <file>...

Turn each given file into zones. If a zone exists, it is skipped, unless -F is given, in which case the zone is destroyed and rebuilt.

Clone

oozone clone [-F] <zone> <file>...

Creates a zone described in each <file>, based on a clone of <zone>. Normal rules apply: <zone> must not be running, and you can only clone the same brand. oozone doesn't bother catching those kinds of errors, so you'll just see the stderr of zoneadm or zonecfg.

Destroy

oozone destroy <zone>...

Destroys all given zones. It won't check whether you're sure, so make certain you are.

Compile

oozone compile <file>...

Creates files suitable for zonecfg(1m) in /var/tmp. Doesn't require any special privileges.

Customize

oozone customize <file>...

Re-reads the given zone definitions and enacts all the zone configuration steps. DNS, facts, uploads etc. Not in any way guaranteed to be idempotent, and almost certainly not of use to anyone not extending oozone.