0.3.rev.A. Add Flash28F support

firmware/usbflashprog/config.hpp

@@ -171,7 +171,5 @@ constexpr uint32_t kCommTimeOut = 50;
 
 /** @brief GENERAL : Time for stabilization, in milliseconds. */
 constexpr uint32_t kStabilizationTime = 200;
-/** @brief GENERAL : Erase pulse duration, in milliseconds. */
-constexpr uint32_t kErasePulseDuration = 100;
 
 #endif // CONFIG_HPP_

firmware/usbflashprog/modules/devcmd.hpp

@@ -0,0 +1,208 @@
+// ---------------------------------------------------------------------------
+// USB EPROM/Flash Programmer
+//
+// Copyright (2024) Robson Martins
+//
+// This work is licensed under a Creative Commons Attribution-NonCommercial-
+// ShareAlike 4.0 International License.
+// ---------------------------------------------------------------------------
+/**
+ * @ingroup Firmware
+ * @file modules/devcmd.hpp
+ * @brief Header of the Device Commands.
+ *
+ * @author Robson Martins (https://www.robsonmartins.com)
+ */
+// ---------------------------------------------------------------------------
+
+#ifndef MODULES_DEVCMD_HPP_
+#define MODULES_DEVCMD_HPP_
+
+// ---------------------------------------------------------------------------
+
+#include <cstdint>
+
+// ---------------------------------------------------------------------------
+
+/** @brief Defines a command to send to a device. */
+typedef struct TDeviceCommand {
+ /** @brief Address. */
+ uint32_t addr;
+ /** @brief Data value. */
+ uint16_t data;
+} TDeviceCommand;
+
+// ---------------------------------------------------------------------------
+
+/** @brief Represents Any Address. */
+#define ANY_ADDRESS static_cast<uint32_t>(-1)
+
+// ---------------------------------------------------------------------------
+// EPROM 27
+// ---------------------------------------------------------------------------
+
+/** @brief EPROM 27E: Erase pulse duration, in milliseconds. */
+constexpr uint32_t kDeviceErasePulseDuration27E = 100;
+
+// ---------------------------------------------------------------------------
+// EEPROM 28C
+// ---------------------------------------------------------------------------
+
+// clang-format off
+
+/** @brief Command sequence to Unprotect an EEPROM 28C/X28 64
+ (ST/Atmel/Xicor). */
+constexpr TDeviceCommand kDeviceCmdUnprotect28C64[] = {
+ {0x1555, 0xAA}, {0x0AAA, 0x55}, {0x1555, 0x80},
+ {0x1555, 0xAA}, {0x0AAA, 0x55}, {0x1555, 0x20}
+};
+
+/** @brief Command sequence to Protect an EEPROM 28C/X28 64
+ (ST/Atmel/Xicor). */
+constexpr TDeviceCommand kDeviceCmdProtect28C64[] = {
+ {0x1555, 0xAA}, {0x0AAA, 0x55}, {0x1555, 0xA0}
+};
+
+/** @brief Command sequence to Unprotect an EEPROM 28C/X28 256
+ (ST/Atmel/Xicor). */
+constexpr TDeviceCommand kDeviceCmdUnprotect28C256[] = {
+ {0x5555, 0xAA}, {0x2AAA, 0x55}, {0x5555, 0x80},
+ {0x5555, 0xAA}, {0x2AAA, 0x55}, {0x5555, 0x20}
+};
+
+/** @brief Command sequence to Protect an EEPROM 28C/X28 256
+ (ST/Atmel/Xicor). */
+constexpr TDeviceCommand kDeviceCmdProtect28C256[] = {
+ {0x5555, 0xAA}, {0x2AAA, 0x55}, {0x5555, 0xA0}
+};
+
+// clang-format on
+
+// ---------------------------------------------------------------------------
+// Flash 28F
+// ---------------------------------------------------------------------------
+
+/** @brief Flash 28F: Erase delay, in milliseconds. */
+constexpr uint32_t kDeviceEraseDelay28F = 10;
+
+// clang-format off
+
+/** @brief Command sequence to Read a Flash 28F. */
+constexpr TDeviceCommand kDeviceCmdRead28F[] = {
+ {ANY_ADDRESS, 0x00}
+};
+
+/** @brief Command sequence to Write a Flash 28F. */
+constexpr TDeviceCommand kDeviceCmdWrite28F[] = {
+ {ANY_ADDRESS, 0x40}
+};
+
+/** @brief Command sequence to Verify a Flash 28F. */
+constexpr TDeviceCommand kDeviceCmdVerify28F[] = {
+ {ANY_ADDRESS, 0xC0}
+};
+
+/** @brief Command sequence to Erase a Flash 28F. */
+constexpr TDeviceCommand kDeviceCmdErase28F[] = {
+ {ANY_ADDRESS, 0x20}, {ANY_ADDRESS, 0x20}
+};
+
+/** @brief Command sequence to GetID a Flash 28F. */
+constexpr TDeviceCommand kDeviceCmdGetId28F[] = {
+ {0x00, 0x90}
+};
+
+// clang-format on
+
+// ---------------------------------------------------------------------------
+// Flash SST28SF
+// ---------------------------------------------------------------------------
+
+// clang-format off
+
+/** @brief Command sequence to Read a Flash SST28SF. */
+constexpr TDeviceCommand kDeviceCmdReadSST28SF[] = {
+ {ANY_ADDRESS, 0xFF}
+};
+
+/** @brief Command sequence to Write a Flash SST28SF. */
+constexpr TDeviceCommand kDeviceCmdWriteSST28SF[] = {
+ {ANY_ADDRESS, 0x10}
+};
+
+/** @brief Command sequence to Erase a Flash SST28SF.
+ * @details This erase a sector (256), not the full device. */
+constexpr TDeviceCommand kDeviceCmdEraseSST28SF[] = {
+ {ANY_ADDRESS, 0x20}, {ANY_ADDRESS, 0xD0}
+};
+
+/** @brief Command sequence to GetID a Flash SST28SF. */
+constexpr TDeviceCommand kDeviceCmdGetIdSST28SF[] = {
+ {0x00, 0x90}
+};
+
+// clang-format on
+
+// ---------------------------------------------------------------------------
+// Flash Am28F(A)
+// ---------------------------------------------------------------------------
+
+// clang-format off
+
+/** @brief Command sequence to Read a Flash Am28F(A). */
+constexpr TDeviceCommand kDeviceCmdReadAm28F[] = {
+ {ANY_ADDRESS, 0x00}
+};
+
+/** @brief Command sequence to Write a Flash Am28F(A). */
+constexpr TDeviceCommand kDeviceCmdWriteAm28F[] = {
+ {ANY_ADDRESS, 0x10}
+};
+
+/** @brief Command sequence to Erase a Flash Am28F(A). */
+constexpr TDeviceCommand kDeviceCmdEraseAm28F[] = {
+ {ANY_ADDRESS, 0x30}, {ANY_ADDRESS, 0x30}
+};
+
+/** @brief Command sequence to GetID a Flash Am28F(A). */
+constexpr TDeviceCommand kDeviceCmdGetIdAm28F[] = {
+ {0x00, 0x90}
+};
+
+// clang-format on
+
+// ---------------------------------------------------------------------------
+// Flash i28F
+// ---------------------------------------------------------------------------
+
+/** @brief Flash i28F Status Byte OK. */
+constexpr uint8_t kDeviceStatusByteOkI28F = 0x80;
+
+// clang-format off
+
+/** @brief Command sequence to Read a Flash i28F. */
+constexpr TDeviceCommand kDeviceCmdReadI28F[] = {
+ {ANY_ADDRESS, 0xFF}
+};
+
+/** @brief Command sequence to Write a Flash i28F. */
+constexpr TDeviceCommand kDeviceCmdWriteI28F[] = {
+ {ANY_ADDRESS, 0x40}
+};
+
+/** @brief Command sequence to Erase a Flash i28F. 
+ * @details This erase a block (n bytes), not the full device. */
+constexpr TDeviceCommand kDeviceCmdEraseI28F[] = {
+ {ANY_ADDRESS, 0x20}, {ANY_ADDRESS, 0xD0}
+};
+
+/** @brief Command sequence to GetID a Flash i28F. */
+constexpr TDeviceCommand kDeviceCmdGetIdI28F[] = {
+ {0x00, 0x90}
+};
+
+// clang-format on
+
+// ---------------------------------------------------------------------------
+
+#endif // MODULES_DEVCMD_HPP_