X10RF-raspberry is for controlling 433(.92)Mhz X10 receiver with the Raspberry pi. This code is based on a fork of p2baron/x10rf initially created for Energia, then ported to Arduino plateform.
wiringPi : https://projects.drogon.net/raspberry-pi/wiringpi/
sudo apt-get install git-core
git clone git://git.drogon.net/wiringPi
cd wiringPi/wiringPi
./build
X10RF-raspberry is shipped with an example program send that you have to compile by executing make. You may want to change the used GPIO pin before compilation in the send.cpp source file.
git clone [email protected]:pyrou/X10RF-raspberry.git
cd X10RF-raspberry
make
sudo ./send B 10 ON