fixed some typos

psas · Jun 18, 2019 · e981892 · e981892
1 parent 6769543
commit e981892
Show file tree

Hide file tree

Showing 4 changed files with 6 additions and 6 deletions.
diff --git a/...tion/.ipynb_checkpoints/00 - Pintle Injector Theory, Design, and Testing-checkpoint.ipynb b/...tion/.ipynb_checkpoints/00 - Pintle Injector Theory, Design, and Testing-checkpoint.ipynb
@@ -172,7 +172,7 @@
     "\\tag{7}\n",
     "\\end{equation}\n",
     "\n",
-    "where $A$ is the exit area of the injector flow path and $/dot{m}$ is the mass flow rate of the associated fluid.\n",
+    "where $A$ is the exit area of the injector flow path and $\\dot{m}$ is the mass flow rate of the associated fluid.\n",
     "\n",
     "Equation 7 shows that in order to empirically determine $K_L$, one must know  the exit area(s) of the injector, the mass flow rate and density of the fluid, and the corresponding pressure drop.\n",
     "\n",
@@ -520,9 +520,9 @@
     "\n",
     "The V1 design was undersized. The combined flow rate of water for this version was approximately 3 gpm, while the design calls for nearly 15 gpm. \n",
     "\n",
-    "<img src=\"./Images/V1_pintle_quarter.png\" align=\"center\" width=\"500\"/>\n",
+    "<img src=\"./Images/V1_pintle_quarter.PNG\" align=\"center\" width=\"500\"/>\n",
     "\n",
-    "> Figure 10: CFD image showing flow velocity in a cross section of scaled up V3 pintle tip. Mass flow rate was set to 1.5 kg/s.\n",
+    "> Figure 10: Image of V1 Pintle with quarter for scale. Test article was machined 6061 Aluminum.\n",
     "\n",
     "#### V2 \n",
     "\n",

diff --git a/Pintle Injector Design Documentation/00 - Pintle Injector Theory, Design, and Testing.ipynb b/Pintle Injector Design Documentation/00 - Pintle Injector Theory, Design, and Testing.ipynb
@@ -172,7 +172,7 @@
     "\\tag{7}\n",
     "\\end{equation}\n",
     "\n",
-    "where $A$ is the exit area of the injector flow path and $/dot{m}$ is the mass flow rate of the associated fluid.\n",
+    "where $A$ is the exit area of the injector flow path and $\\dot{m}$ is the mass flow rate of the associated fluid.\n",
     "\n",
     "Equation 7 shows that in order to empirically determine $K_L$, one must know  the exit area(s) of the injector, the mass flow rate and density of the fluid, and the corresponding pressure drop.\n",
     "\n",
@@ -520,9 +520,9 @@
     "\n",
     "The V1 design was undersized. The combined flow rate of water for this version was approximately 3 gpm, while the design calls for nearly 15 gpm. \n",
     "\n",
-    "<img src=\"./Images/V1_pintle_quarter.png\" align=\"center\" width=\"500\"/>\n",
+    "<img src=\"./Images/V1_pintle_quarter.PNG\" align=\"center\" width=\"500\"/>\n",
     "\n",
-    "> Figure 10: CFD image showing flow velocity in a cross section of scaled up V3 pintle tip. Mass flow rate was set to 1.5 kg/s.\n",
+    "> Figure 10: Image of V1 Pintle with quarter for scale. Test article was machined 6061 Aluminum.\n",
     "\n",
     "#### V2 \n",
     "\n",

diff --git a/...cumentation/Images/glove valve set up.jpg → ...cumentation/Images/globe valve set up.jpg b/...cumentation/Images/glove valve set up.jpg → ...cumentation/Images/globe valve set up.jpg
diff --git a/V_Series/Images/glove valve set up.jpg → V_Series/Images/globe valve set up.jpg b/V_Series/Images/glove valve set up.jpg → V_Series/Images/globe valve set up.jpg