Tutorial of IPOP access point for an administrator

1. Download the latest RPM package(ipop-0.1-1.x86_64.rpm) for access point from the link.

IPOP RPM for CentOs

or you can use below command on your console.

wget http://www.acis.ufl.edu/~xetron/pragma-ent/ipop-0.1-1.x86_64.rpm -O ipop-0.1-1.x86_64.rpm

1. IPOP requires python-argparse package as a prerequisite. Install it if you don't have it.

sudo yum install python-argparse

1. Install it on your CentOs 6.X.

sudo rpm -i ipop-0.1-1.x86_64.rpm

1. Once the completion of the package isntallationk, IPOP is running with temporary credentials and host(config file is at /etc/ipop.conf). You need to contact one of the coordinator to get a new config file.

• Kyuho Jeong ([email protected])
• Dr Kohei Ichikawa ([email protected])

1. After you retrieve the config file from the coordinator, place the ipop.conf file at /etc/. Then restart the IPOP service.

sudo /etc/init.d/ipop-service restart