freeradius

Overview

This module installs and configures FreeRADIUS server on Linux. It supports FreeRADIUS 3.x only. It was designed with CentOS in mind but should work on other distributions.

This module requires Puppet 4.0.0 or greater. Puppet 3.x was discontinued at the end of 2016.

`jgazeley/freeradius`	FreeRADIUS
3.x	3.x
2.x	3.x
1.x	2.x and 3.x
0.x	2.x

Module Description

This module installs FreeRADIUS from a distro-provided package and installs a number of customised config files to enable flexibility. It then provides some helpers to allow you to easily configure virtual servers (sites), modules, clients and other config items. Most of these items accept a flat config file which you supply either as a static file or a template - similar to the source and content parameters in Puppet's file resource.

This module is designed to make it more straightforward for RADIUS administrators to deploy RADIUS servers using Puppet. This module does not serve as a wizard and does not avoid having to have an understanding of FreeRADIUS.

Usage

This module provides several classes and defined types which take parameters.

Classes

`freeradius`

The freeradius class installs the base server. In the early releases, this class does not have many parameters as most values are hard-coded. I am working on parameterising more of the global settings to increase flexibility. Patches are welcome.

`control_socket`

Use of the control_socket parameter in the freeradius class is deprecated. Use the freeradius::control_socket class instead.

`correct_escapes`

Use correct backslash escaping in unlang. Default: true

`max_requests`

The maximum number of requests which the server keeps track of. This should be 256 multiplied by the number of clients. Default: 4096

`max_request_time`

The maximum time (in seconds) to handle a request. Default: 30

`max_servers`

Limit on the total number of servers running. Default: 4096

`mysql_support`

Install support for MySQL. Note this only installs the package. Use freeradius::sql to configure SQL support. Default: false

`perl_support`

Install support for Perl. Default: false

`preserve_mods`

Leave recommended stock modules enabled. Default: true

`utils_support`

Install FreeRADIUS utils. Default: false

`ldap_support`

Install support for LDAP. Default: false

`dhcp_support`

Install support for DHCP. Default: false

`krb5_support`

Install support for Kerberos. Default: false

`wpa_supplicant`

Install wpa_supplicant utility. Default: false

`winbind_support`

Add the radius user to the winbind privileged group. You must install winbind separately. Default: false.

`log_destination`

Configure destination of log messages. Valid values are files, syslog, stdout and stderr. Default: files.

`syslog_facility`

Configure which syslog facility to use when log_destination is set to syslog. Default: daemon.

`syslog`

Add a syslog rule (using the saz/rsyslog module). Default: false.

`log_auth`

Log authentication requests (yes/no). Default: no.

`package_ensure`

Choose whether the package is just installed and left (installed), or updated every Puppet run (latest). Default: installed

class { 'freeradius':
  max_requests    => 4096,
  max_servers     => 4096,
  mysql_support   => true,
  perl_support    => true,
  utils_support   => true,
  wpa_supplicant  => true,
  winbind_support => true,
  syslog          => true,
  log_auth        => 'yes',
}

`freeradius::status_server`

The freeradius::status_server class enabled the status server. To remove the status server, do not include this class and the server will be removed.

`secret`

The shared secret for the status server. Required.

`port`

The port to listen for status requests on. Default: 18121

`listen`

The address to listen on. Defaults to listen on all addresses but you could set this to $::ipaddress or 127.0.0.1. Default: *

  # Enable status server
  class { 'freeradius::status_server':
    port   => '18120',
    secret => 't0pSecret!',
  }

`freeradius::control_socket`

The freeradius::control_socket class enables the control socket which can be used with RADMIN. To remove the control socket, do not include this class and the socket will be removed.

`mode`

Whether the control socket should be read-only or read-write. Choose from ro, rw. Default: ro.

  # Enable control socket
  class { 'freeradius::control_socket':
    mode => 'ro',
  }

`freeradius::radsniff`

The freeradius::radsniff class configures and runs the RADSNIFF service. It requires freeradius-utils to be installed, so will fail if utils_support is not enabled on the freeradius class.

Note: This is only supported on RedHat like systems at present.

`options`

Command line options to be passed to radsniff. Quotes are escaped

  # Enable radsniff, with a filter, sending data to collectd (requires freeradius to be compiled for this)
  class { 'freeradius::radsniff':
    options => '-m -p1812,1813 -O unix:/var/run/collectd.sock -N freeradius -W 10 -i eth0 -f "src not 192.0.2.1"',
  }

Resources

`freeradius::attr`

Install arbitrary attribute filters from a flat file. These are installed in an appropriate module config directory. The contents of the attr_filter module are automatically updated to reference the filters.

`key`

Specify a RADIUS attribute to be the key for this attribute filter. Enter only the string part of the name.

`prefix`

Specify the prefix for the attribute filter name before the dot, e.g. filter.post_proxy. This is usually set to filter on FR2 and attr_filter on FR3. Default: filter.

freeradius::attr { 'eduroamlocal':
  key    => 'User-Name',
  prefix => 'attr_filter',
  source => 'puppet:///modules/site_freeradius/eduroamlocal',
}

`relaxed`

Whether the filter removes or copies unmatched attributes, relaxed = no or yes respectively. An undefined value results in no explicit statement, causing the default behaviour of FreeRADIUS equivalent to 'relaxed = no'. Default: undef.

`freeradius::blank`

Selectively blank certain stock config files that aren't required. This is preferable to deleting them because the package manager will replace certain files next time the package is upgraded, potentially causing unexpected behaviour.

The resource title should be the relative path from the FreeRADIUS config directory to the file(s) you want to blank. You can pass multiple files in an array.

freeradius::blank { 'sites-enabled/default': }

freeradius::blank { [
  'sites-enabled/default',
  'eap.conf',
]: }

`freeradius::cert`

Install certificates as provided. These are installed in certs. Beware that any certificates not deployed by Puppet will be purged from this directory.

freeradius::cert { 'mycert.pem':
  source => 'puppet:///modules/site_freeradius/mycert.pem',
  type   => 'key',
}

freeradius::cert { 'mycert.pem':
  content => '<your key/cert content here>',
  type    => 'key',
}

`type`

Set file permissions on the installed certificate differently depending on whether this is a private key or a public certificate. Note that the default is to treat the file as a private key and remove world-readable privileges. Allowable values: cert, key. Default: key.

`freeradius::client`

Define RADIUS clients as seen in clients.conf

# Single host example
freeradius::client { "wlan-controller01":
  ip        => '192.168.0.1',
  secret    => 'testing123',
  shortname => 'wlc01',
  nastype   => 'other',
  port      => '1645-1646',
  firewall  => true,
}

# Range example
freeradius::client { "wlan-controllers":
  ip        => '192.168.0.0/24',
  secret    => 'testing123',
  shortname => 'wlc01',
  nastype   => 'other',
  port      => '1645-1646',
  firewall  => true,
}

# Huntgroup Example
freeradius::client { "asa01":
  ip         => '192.168.0.1',
  secret     => 'testing123',
  huntgroups => [
    { name       => 'firewall',
      conditions => [ 'NAS-IP-Address == 192.168.0.1' ] },
  ]
}

`ip`

The IP address of the client or range in CIDR format. For IPv6, use ipv6addr. ip and ip6 are mutually exclusive but one must be supplied. Default: undef.

`ip6`

The IPv6 address of the client or range in CIDR format. ip and ip6 are mutually exclusive but one must be supplied. Default: undef.

`shortname`

A short alias that is used in place of the IP address or fully qualified hostname provided in the first line of the section. Defaults to resource name.

`secret`

The RADIUS shared secret used for communication between the client/NAS and the RADIUS server. Required.

`virtual_server`

The virtual server that traffic from this client should be sent to. Default: undef.

`nastype`

The nastype attribute is used to tell the checkrad.pl script which NAS-specific method it should use when checking simultaneous use. See man clients.conf for a list of all options. Default: undef.

`proto`

Transport protocol used by the client. If unspecified, defaults to "udp", which is the traditional RADIUS transport. Valid values are udp, tcp or * for both of them. Default: undef.

`require_message_authenticator`

Old-style clients do not send a Message-Authenticator in an Access-Request. RFC 5080 suggests that all clients SHOULD include it in an Access-Request. Valid values are yes and no. Default: no.

`login`

Login used by checkrad.pl when querying the NAS for simultaneous use. Default: undef.

`password`

Password used by checkrad.pl when querying the NAS for simultaneous use. Default: undef.

`coa_server`

A pointer to the home_server_pool OR a home_server section that contains the CoA configuration for this client. Default: undef.

`response_window`

Response window for proxied packets. Default: undef.

`max_connections`

Limit the number of simultaneous TCP connections from a client. It is ignored for clients sending UDP traffic. Default: undef.

`lifetime`

The lifetime, in seconds, of a TCP connection. It is ignored for clients sending UDP traffic. Default: undef.

`idle_timeout`

The idle timeout, in seconds, of a TCP connection. It is ignored for clients sending UDP traffic. Default: undef.

`port`

The UDP port that this virtual server should listen on. Leave blank if this client is not tied to a virtual server. Currently the port number is only used to create firewall exceptions and you only need to specify it if you set firewall => true. Use port range syntax as in puppetlabs-firewall. Default: undef.

`firewall`

Create a firewall exception for this virtual server. If this is set to true, you must also supply port and either ip or ip6. Default: false.

`attributes`

Array of attributes to assign to this client. Default: empty.

`huntgroups`

Array of hashes, each hash defines one freeradius::huntgroup. Hash keys are all passed to a new instance of freeradius::huntgroup.

`freeradius::config`

Install arbitrary config snippets from a flat file. These are installed in mods-config

freeradius::config { 'realm-checks.conf':
  source => 'puppet:///modules/site_freeradius/realm-checks.conf',
}

freeradius::config { 'realm-checks.conf':
  content => template('your_template),
}

`freeradius::dictionary`

Install custom dictionaries without breaking the default FreeRADIUS dictionary. Custom dictionaries are installed in dictionary.d and automatically included in the global dictionary.

freeradius::dictionary { 'mydict':
  source => 'puppet:///modules/site_freeradius/dictionary.mydict',
}

`freeradius::home_server`

This section defines a "Home Server" which is another RADIUS server that gets sent proxied requests.

`secret`

The shared secret use to "encrypt" and "sign" packets between FreeRADIUS and the home server.

`type`

Home servers can be sent Access-Request packets or Accounting-Request packets. Allowed values are:

auth Handles Access-Request packets
acct Handles Accounting-Request packets
auth+acct Handles Access-Request packets at "port" and Accounting-Request packets at "port + 1"
coa Handles CoA-Request and Disconnect-Request packets.

Default: auth

`ipaddr`

IPv4 address or hostname of the home server. Specify one of ipaddr, ipv6addr or virtual_server

`ipv6addr`

IPv6 address or hostname of the home server. Specify one of ipaddr, ipv6addr or virtual_server

`virtual_server`

If you specify a virtual_server here, then requests will be proxied internally to that virtual server. These requests CANNOT be proxied again, however. The intent is to have the local server handle packets when all home servers are dead. Specify one of ipaddr, ipv6addr or virtual_server

`port`

The port to which packets are sent. Usually 1812 for type "auth", and 1813 for type "acct". Older servers may use 1645 and 1646. Use 3799 for type "coa" Default: 1812

`proto`

The transport protocol. If unspecified, defaults to "udp", which is the traditional RADIUS transport. It may also be "tcp", in which case TCP will be used to talk to this home server. Default: udp

`status_check`

Type of check to see if the home_server is dead or alive. Valid values are none, status-server and request. Default: undef.

`freeradius::home_server_pool`

`home_server`

An array of one or more home servers (this must be an array even if you only have one home server). The names of the home servers are NOT the hostnames, but the names of the sections. (e.g. home_server foo {...} has name "foo".

Note that ALL home servers listed here have to be of the same type. i.e. they all have to be "auth", or they all have to be "acct", or they all have to be "auth+acct".

`type`

The type of this pool controls how home servers are chosen.

fail-over the request is sent to the first live home server in the list. i.e. If the first home server is marked "dead", the second one is chosen, etc.
load-balance the least busy home server is chosen For non-EAP auth methods, and for acct packets, we recommend using "load-balance". It will ensure the highest availability for your network.
client-balance the home server is chosen by hashing the source IP address of the packet. This configuration is most useful to do simple load balancing for EAP sessions
client-port-balance the home server is chosen by hashing the source IP address and source port of the packet.
keyed-balance the home server is chosen by hashing (FNV) the contents of the Load-Balance-Key attribute from the control items.

The default type is fail-over.

`virtual_server`

A virtual_server may be specified here. If so, the "pre-proxy" and "post-proxy" sections are called when the request is proxied, and when a response is received.

`fallback`

If ALL home servers are dead, then this "fallback" home server is used. If set, it takes precedence over any realm-based fallback, such as the DEFAULT realm.

For reasons of stability, this home server SHOULD be a virtual server. Otherwise, the fallback may itself be dead!

`freeradius::huntgroup`

Define a huntgroup given a name and the conditions under which a huntgroup matches a client.

freeradius::huntgroup { 'switchaccess':
  huntgroup  => 'switchaccess',
  conditions => [
    'NAS-IP-Address == 192.168.0.1'
  ]
}

`huntgroup`

Name of the huntgroup to assign, if conditions are all met. Default to the resource title.

`conditons`

Array of conditions which are used to match the client, each element should contain a condition in the form of 'Key == Value'.

`type`

`home_server`

`freeradius::instantiate`

Instantiate a module that is not automatically instantiated.

freeradius::instantiate { 'mymodule': }

`freeradius::ldap`

Deprecated. Use freeradius::module::ldap instead.

`freeradius::module::ldap`

Configure LDAP support for FreeRADIUS

`ensure`

Whether the site should be present or not.

`identity`

LDAP account for searching the directory. Optional.

`password`

Password for the identity account. Optional.

`sasl`

SASL parameters to use for admin binds to the ldap server. This is a hash with 3 possible keys:

mech: The SASL mechanism used.
proxy: SASL authorizatino identity to proxy.
realm: SASL realm (used for kerberos)

Default: {}

`basedn`

Unless overridden in another section, the dn from which all searches will start from. Required.

`server`

Array of hostnames or IP addresses of the LDAP server(s). Note that this needs to match the name(s) in the LDAP server certificate, if you're using ldaps. Default: [localhost]

`port`

Port to connect to the LDAP server on. Default: 389

`valuepair_attribute`

Generic valuepair attribute. If set, this attribute will be retrieved in addition to any mapped attributes. Default: undef.

`update`

Array with mapping of LDAP directory attributes to RADIUS dictionary attributes. Default: []

`edir`

Se to yes if you have eDirectory and want to use the universal password mechanisms. Possible values are yes and no. Default: undef.

`edir_autz`

Set to yesif you want to bind as the user after retrieving the Cleartest-Password. Possible values are yes and no. Default: undef.

`user_base_dn`

Where to start searching for users in the LDAP tree. Default: ${..base_dn}.

`user_filter`

Filter for user objects. Default: uid=%{%{Stripped-User-Name}-%{User-Name}})

`user_sasl`

SASL parameters to use for user binds to the ldap server. This is a hash with 3 possible keys:

mech: The SASL mechanism used.
proxy: SASL authorizatino identity to proxy.
realm: SASL realm (used for kerberos)

Default: {}

`user_scope`

Search scope for users. Valid values are base, one, sub and children. Default: undef (sub is applied).

`user_sort_by`

Server side result sorting. A list of space delimited attributes to order the result set by. Default: undef.

`user_access_attribute`

If this undefined, anyone is authorized. If it is defined, the contents of this attribute determine whether or not the user is authorised. Default: undef.

`user_access_positive`

Control whether the presence of access_attribute allows access or denys access. Default: undef.

`group_base_dn`

Where to start searching for groups in the LDAP tree. Default: ${..base_dn}.

`group_filter`

Filter for group objects. Default: '(objectClass=posixGroup)'.

`group_scope`

Search scope for groups. Valid values are base, one, sub and children. Default: undef (sub is applied).

`group_name_attribute`

Attribute that uniquely identifies a group. Default: undef ('cn' is applied).

`group_membership_filter`

Filter to find group objects a user is member of. That is, group objects with attributes that identify members (the inverse of group_membership_attribute). Default: undef.

`group_membership_attribute`

The attribute in user objects which contain the namos or DNs of groups a user is a member of. Default: 'memberOf'.

`group_cacheable_name`

If group_cacheable_name or group_cacheable_dn are enabled, all group information for the user will be retrieved from the directory and written to LDAP-Group attributes appropiaate for the instance of rlm_ldap. Default: undef.

`group_cacheable_dn`

If group_cacheable_name or group_cacheable_dn are enabled, all group information for the user will be retrieved from the directory and written to LDAP-Group attributes appropiaate for the instance of rlm_ldap. Default: undef.

`group_cache_attribute`

Override the normal cache attribute (<inst>-LDAP-Group or LDAP-Group if using the default instance) and create a custom attribute. Default: undef.

`group_attribute`

Override the normal group comparison attribute name (<inst>-LDAP-Group or LDAP-Group if using the default instance). Default: undef.

`profile_filter`

Filter for RADIUS profile objects. Default: undef.

`profile_default`

The default profile. This may be a DN or an attribute reference. Default: undef.

`profile_attribute`

The LDAP attribute containing profile DNs to apply in addition to the default profile above. Default: undef.

`client_base_dn`

Where to start searching for clients in the LDAP tree. Default: '${..base_dn}'.

`client_filter`

Filter to match client objects. Default: '(objectClass=radiusClient)'.

`client_scope`

Search scope for clients. Valid values are base, one, sub and children. Default: undef (sub is applied).

`read_clients`

Load clients on startup. Default: undef ('no' is applied).

`dereference`

Control under which situations LDAP aliases are followed. May be one of never, searching, finding or always. Default: undef (always is applied).

`chase_referrals`

With rebind control whether the server follows references returned by LDAP directory. Mostly used for AD compatibility. Default: yes.

`rebind`

With chase_referrals control whether the server follows references returned by LDAP directory. Mostly used for AD compatibility. Default: yes.

`use_referral_credentials`

On rebind, use the credentials from the rebind url instead of admin credentials. Default: no. This parameter should only be set when using FreeRADIUS 3.1.x.

`session_tracking`

If yes, then include draft-wahl-ldap-session tracking controls. Default: undef. This parameter should only be set when using FreeRADIUS 3.1.x.

`uses`

How many times the connection can be used before being re-established. This is useful for things like load balancers, which may exhibit sticky behaviour without it. 0 is unlimited. Default: 0

`retry_delay`

The number of seconds to wait after the server tries to open a connection, and fails. Default: `30'.

`lifetime`

The lifetime (in seconds) of the connection. Default: 0 (forever).

`idle_timeout`

Idle timeout (in seconds). A connection which is unused for this length of time will be closed. Default: 60.

`connect_timeout`

Connection timeout (in seconds). The maximum amount of time to wait for a new connection to be established. Default: 3.0. This parameter should only be set when using FreeRADIUS 3.1.x.

`idle`

Sets the idle time before keepalive probes are sent. Default 60

This option may not be supported by your LDAP library. If this configuration entry appears in the output of radiusd -X then it is supported. Otherwise, it is unsupported and changing it will do nothing.

`probes`

Sets the maximum number of keepalive probes TCP should send before dropping the connection. Default: 3

This option may not be supported by your LDAP library. If this configuration entry appears in the output of radiusd -X then it is supported. Otherwise, it is unsupported and changing it will do nothing.

`interval`

Setss the interval in seconds between individual keepalive probes. Default: 3

This option may not be supported by your LDAP library. If this configuration entry appears in the output of radiusd -X then it is supported. Otherwise, it is unsupported and changing it will do nothing.

`timeout`

Number of seconds to wait for LDAP query to finish. Default: 10

`timelimit`

Seconds LDAP server has to process the query (server-side time limit). Default: 20.

`ldap_debug`

Debug flag for LDAP SDK. Default: 0x0028.

`start`

Connections to create during module instantiation. If the server cannot create specified number of connections during instantiation it will exit. Set to 0 to allow the server to start without the directory being available. Default: ${thread[pool].start_servers}

`min`

Minimum number of connections to keep open. Default: ${thread[pool].min_spare_servers}

`max`

Maximum number of connections. Default: ${thread[pool].max_servers}

`spare`

Spare connections to be left idle. Default: ${thread[pool].max_spare_servers}

`starttls`

Set this to 'yes' to use TLS encrypted connections to the LDAP database by using the StartTLS extended operation. The StartTLS operation is supposed to be used with normal ldap connections instead of using ldaps (port 636) connections

Default: no

`cafile`

Path to CA cert file for TLS

`certfile`

Path to cert file for TLS

`capath`

Path to CA cert files for TLS

`keyfile`

Path to key file for TLS

`random_file`

Random file used for TLS operations. Default: undef ('/dev/urandom' is used).

`requirecert`

Certificate Verification requirements. Choose from: 'never' (do not even bother trying) 'allow' (try, but don't fail if the certificate cannot be verified) 'demand' (fail if the certificate does not verify) 'hard' (similar to 'demand' but fails if TLS cannot negotiate)

Default: allow

`freeradius::krb5`

Configure Kerberos support for FreeRADIUS

`keytab`

Full path to the Kerberos keytab file

`principal`

Name of the service principal

`start`

Connections to create during module instantiation. If the server cannot create specified number of connections during instantiation it will exit. Set to 0 to allow the server to start without the directory being available. Default: ${thread[pool].start_servers}

`min`

Minimum number of connections to keep open. Default: ${thread[pool].min_spare_servers}

`max`

Maximum number of connections. Default: ${thread[pool].max_servers}

`spare`

Spare connections to be left idle. Default: ${thread[pool].max_spare_servers}

`freeradius::listen`

Define listening interface

`type`

Type of listener. Must be one of auth, acct, proxy, detail, status, coa. Default: auth

`ip`

The IPv4 address of the interface to listen. ip and ip6 are mutually exclusive. Default: undef

`ip6`

The IPv6 address of the interface to listen. ip and ip6 are mutually exclusive. Default: undef

`port`

Default: undef

`max_connections`

Default : 16

`lifetime`

Default : 0

`idle_timeout`

Default : 30

`freeradius::module`

Install a module from a flat file, or enable a stock module that came with your distribution of FreeRADIUS. Modules are installed into mods-available and automatically symlinked into mods-enabled, to ensure compatibility with package managers. Any files in this directory that are not managed by Puppet will be removed.

# Enable a stock module
freeradius::module { 'pap':
  preserve => true,
}

# Install a custom module from a flat file
freeradius::module { 'buffered-sql':
  source => 'puppet:///modules/site_freeradius/buffered-sql',
}

# Install a custom module from a template
freeradius::module { 'buffered-sql':
  content => template('some_template.erb)',
}

`freeradius::module::ippool`

Install a ippool module

`ensure`

If the module should present or absent. Default: present.

`range_start`

The first IP address of the pool.

`range_stop`

The last IP address of the pool.

`netmask`

The network mask used for the pool

`cache_size`

The gdbm cache size for the db files. Default: number of IP address in the range.

`filename`

The main db file used to allocate address. Default: ${db_dir}/db.${name}

`ip_index`

Helper db index file. Default: ${db_dir}/db.${name}.index

`override`

If set, the Framed-IP-Address already in the reply (if any) will be discarded. Default: no.

`maximum_timeout`

Maximum time in seconds that an entry may be active. Default: 0 (no timeout).

`key`

The key to use for the session database. Default: undef.

`freeradius::module::linelog`

Install and configure linelog module to log text to files.

`ensure`

If the module should present or absent. Default: present.

`filename`

The file where the logs will go. Default: ${logdir}/linelog.

`escape_filenames`

If UTF-8 characters should be escaped from filename. Default: no.

`permissions`

Unix-style permissions for the log file. Default: 0600.

`group`

The Unix group which owns the log file. Default: undef.

`syslog_facility`

Syslog facility (if logging via syslog). Default: undef (daemon).

`syslog_severity`

Syslog severity (if logging via syslog). Default: undef (info).

`format`

The default format string. Default: This is a log message for %{User-Name}.

`reference`

If it is defined, the line string logged is dynamically expanded and the result is used to find another configuration entry here, with the given name. That name is then used as the format string. Default: messages.%{%reply:Packet-Type}:-default}.

`messages`

Array of messages. The messages defined here are taken from the reference expansion. Default: [].

`accounting_request`

Array of messages. Similar to messages but for accounting logs.

`freeradius::module::detail`

Install a detail module to write detailed log of accounting records.

`ensure`

If the module should present or absent. Default: present.

`filename`

The file where the detailed logs will go. Default: ${radacctdir}/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d.

`escape_filenames`

If UTF-8 characters should be escaped from filename. Default: no.

`permissions`

Unix-style permissions for the log file. Default: 0600.

`group`

The Unix group which owns the log file. Default: undef.

`header`

Header to use in every entry in the detail file. Default: undef (%t).

`locking`

Enable if a detail file reader will be reading this file. Default: undef.

`log_packet_header`

Log the package src/dst IP/port. Default: undef.

`suppress`

Array of (sensitive) attributes that should be removed from the log. Default: [].

`freeradius::module::files`

Install a file module with users in freeradius.

`ensure`

If the module should present or absent. Default: present.

`moddir`

Directory where the users file is located. Default: ${modconfdir}/${.:instance}.

`key`

The default key attribute to use for matches. Default: undef.

`filename`

The (old) users style filename. Default: ${moddir}/authorize.

`usersfile`

Accepted for backups compatibility. Default: undef.

`acctusersfile`

Accepted for backups compatibility. Default: undef.

`preproxy_usersfile`

Accepted for backups compatibility. Default: undef.

`users`

Array of hashes with users entries (see "man users"). If entry in the hash is an array which valid keys are:

login: The login of the user.
check_items: An array with check components for the user entry.
reply_items: An array with reply components for the user entry.

For example:

freeradius::module::files {'myuserfile':
  users => [
    {
      login => 'DEFAULT',
      check_items => [
        'Realm == NULL'
      ],
      reply_items => [
        'Fall-Through = No
      ],
    },
  ],
}

will produce a user file like:

DEFAULT Realm == NULL
  Fall-Through = No

You should use just one of users, source or content parameters.

`source`

Provide source to a file with the users file. Default: undef.

You should use just one of users, source or content parameters.

`content`

Provide the content for the users file. Default: undef.

You should use just one of users, source or content parameters.

`freeradius::module::eap`

Install a module for EAP configuration

`ensure`

If the module should present or absent. Default: present.

`default_eap_type`

Default EAP type. Default: md5.

`timer_expire`

How much time an entry is maintained in the list to correlate EAP-Response packets with EAP-Request packets. Default: 60.

`ignore_unknown_eap_types`

By setting this options to yes, you can tell the server to keep processing requests with an EAP type it does not support. Default: no.

`cisco_accounting_username_bug`

Enables a work around to handle Cisco AP1230B firmware bug. Default: no.

`max_sessions`

Maximum number of EAP sessions the server tracked. Default: ${max_requests}.

Parameters to configure EAP-pwd authentication.

`eap_pwd`

If set to true configures EAP-pwd authentication. Default: false.

`pwd_group`

group used in pwd configuration. Default: undef.

`pwd_server_id`

server_id option in pwd configuration. Default: undef.

`pwd_fragment_size`

fragment_size option in pwd configuration. Default: undef.

`pwd_virtual_server`

The virtual server which determines the "known good" password for the user in pwd authentication. Default: undef.

Parameters to configure Generic Tocken Card

`gtc_challenge`

The default challenge. Default: undef

`gtc_auth_type`

auth_type use in GTC. Default: PAP.

Parameters for TLS configuration

`tls_config_name`

Name for the tls-config. It normally should not be used. Default: tls-common.

`tls_private_key_password`

Private key password. Default: undef.

`tls_private_key_file`

File with the private key of the server. Default: ${certdir}/server.pem.

`tls_certificate_file`

File with the certificate of the server. Default: ${certdir}/server.pem.

`tls_ca_file`

File with the trusted root CA list. Default: ${certdir}/ca.pem.

`tls_auth_chain`

When setting to no, the server certificate file MUST include the full certificate chain. Default: undef.

`tls_psk_identity`

PSK identity (if OpenSSL supports TLS-PSK). Default: undef.

`tls_psk_hexphrase`

PSK (hex) password (if OpenSSL supports TLS-PSK). Default: undef.

`tls_dh_file`

DH file. Default: ${certdir}/dh.

`tls_random_file`

Random file. Default: undef (/dev/urandom).

`tls_fragment_size`

Fragment size for TLS packets. Default: undef.

`tls_include_length`

If set to no, total length of the message is included only in the first packet of a fragment series. Default: undef.

`tls_check_crl`

Check the certificate revocation list. Default: undef.

`tls_check_all_crl`

Check if intermediate CAs have been revoked. Default: undef.

`tls_allow_expired_crl`

Allow use of an expired CRL. Default: undef.

`tls_ca_path`

Path to the CA file. Default: ${cadir}.

`tls_check_cert_issuer`

If set, the value will be checked against the DN of the issuer in the client certificate. Default: undef.

`tls_check_cert_cn`

If it is set, the value will be xlat'ed and checked against the CN in the client certificate. Default: undef

`tls_cipher_list`

Set this option to specify the allowed TLS cipher suites. Default: DEFAULT.

`tls_disable_tlsv1_2`

Disable TLS v1.2. Default: undef.

`tls_ecdh_curve`

Elliptical cryptography configuration. Default: prime256v1.

`tls_cache_enable`

Enable TLS cache. Default: yes.

`tls_cache_lifetime`

Lifetime of the cached entries, in hours. Default: 24.

`tls_cache_max_entries`

The maximum number of entries in the cache. Default: 255.

`tls_cache_name`

Internal name of the session cache. Default: undef.

`tls_cache_persist_dir`

Simple directory-based storage of sessions. Default: undef.

`tls_verify_skip_if_ocsp_ok`

If the OCSP checks suceed, the verify section is run to allow additional checks. Default: undef.

`tls_verify_tmpdir`

Temporary directory where the client certificates are stored. Default: undef.

`tls_verify_client`

The command used to verify the client certificate. Default: undef.

`tls_ocsp_enable`

Enable OCSP certificate verification. Default: no.

`tls_ocsp_override_cert_url`

If set to yes the OCSP Responder URL is overrided. Default: yes.

`tls_ocsp_url`

The URL used to verify the certificate when tls_ocsp_override_cert_url is set to yes. Default: http://127.0.0.1/ocsp/.

`tls_ocsp_use_nonce`

If the OCSP Responder can not cope with nonce in the request, then it can be set to no. Default: undef.

`tls_ocsp_timeout`

Number of seconds before giving up waiting for OCSP response. Default: undef.

`tls_ocsp_softfail`

To treat OCSP errors as soft. Default: undef.

`tls_virtual_server`

Virtual server for EAP-TLS requests. Default: undef.

Parameters for TTLS configuration

`ttls_default_eap_type`

Default EAP type use inside the TTLS tunnel. Default: md5.

`ttls_copy_request_to_tunnel`

If set to yes, any attribute in the ouside of the tunnel but not in the tunneled request is copied to the tunneled request. Default: no.

`ttls_use_tunneled_reply`

If set to yes, reply attributes get from the tunneled request are sent as part of the outside reply. Default: no.

`ttls_virtual_server`

The virtual server that will handle tunneled requests. Default: inner-tunnel.

`ttls_include_length`

If set to no, total length of the message is included only in the first packet of a fragment series. Default: undef.

`ttls_require_client_cert`

Set to yes to require a client certificate. Default: undef.

Parameters for PEAP configuration

`peap_default_eap_type`

Default EAP type used in tunneled EAP session. Default: mschapv2.

`peap_copy_request_to_tunnel`

If set to yes, any attribute in the ouside of the tunnel but not in the tunneled request is copied to the tunneled request. Default: no.

`peap_use_tunneled_reply`

If set to yes, reply attributes get from the tunneled request are sent as part of the outside reply. Default: no.

`peap_proxy_tunneled_request_as_eap`

Set the parameter to no to proxy the tunneled EAP-MSCHAP-V2 as normal MSCHAPv2. Default: undef.

`peap_virtual_server`

The virtual server that will handle tunneled requests. Default: inner-tunnel.

`peap_soh`

Enables support for MS-SoH. Default: undef.

`peap_soh_virtual_server`

The virtual server that will handle tunneled requests. Default: undef.

`peap_require_client_cert`

Set to yes to require a client certificate. Default: undef.

Parameters for MS-CHAPv2 configuration

`mschapv2_send_error`

If set to yes, then the error message will be sent back to the client. Default: undef.

`mschapv2_identity`

Server indentifier to send back in the challenge. Default: undef.

`freeradius::module::preprocess`

Install a preprocess module to process huntgroups and hints files.

`ensure`

If the module should present or absent. Default: present.

`moddir`

Directory where the preprocess' files are located. Default: ${modconfdir}/${.:instance}.

`huntgroups`

Path for the huntgroups file. Defaut: ${moddir}/huntgroups.

`hints`

Path for the hints file. Default ${moddir}/hints.

`with_ascend_hack`

This hack changes Ascend's weird port numbering to standar 0-??? port numbers. Default: no.

`ascend_channels_per_line`

Default: 23.

`with_ntdomain_hack`

Windows NT machines often authenticate themselves as NT_DOMAIN\username. If this parameter is set to yes, then the NT_DOMAIN portion of the user-name is silently discarded. Default: no.

`with_specialix_jetstream_hack`

Set to yes if you are using a Specialix Jetstream 8500 access server. Default: no.

`with_cicso_vsa_hack`

Set to yes if you are using a Cisco or Quintum NAS. Default: no.

`freeradius::module::huntgroup`

Creates a huntgroup entry in a huntgroup file (see freeradius::module::preprocess)

`conditions`

Array of rules to match in this huntgroup.

`order`

Order of this huntgroup in the huntgroup files. This is the order parameter for the underlying concat::fragment. Default: `50' .

`huntgroup`

The path of the huntgroup file. Default: huntgroup.

`freeradius::module::perl`

Installs the Perl module rlm_perl with more advanced configuration

freeradius::module::perl { 'somename':
  perl_filename  => 'scriptname.pl',
  path           => "puppet:///modules/profiles/radius_proxy/",
  function_names => $function_names,
}

`perl_filename`

Filename of the Perl script.

`path`

The path of the source file on the Puppet server.

`function_names`

If different function names to default are used, or if seperate functions for accounting start and stop are used, just pass a hash of default and actual function names.

$function_names = {
  "func_authenticate"     => "alternative_name",
  "func_start_accounting" => "start_function",
  "func_stop_accounting"  => "stop_function",
}

`freeradius::policy`

Install a policy from a flat file.

freeradius::policy { 'my-policies':
  source => 'puppet:///modules/site_freeradius/my-policies',
}

`freeradius::realm`

Define a realm in proxy.conf. Realms point to pools of home servers.

`virtual_server`

Set this to "proxy" requests internally to a virtual server. The pre-proxy and post-proxy sections are run just as with any other kind of home server. The virtual server then receives the request, and replies, just as with any other packet. Once proxied internally like this, the request CANNOT be proxied internally or externally.

`auth_pool`

For authentication, the auth_pool configuration item should point to a home_server_pool that was previously defined. All of the home servers in the auth_pool must be of type auth.

`acct_pool`

For accounting, the acct_pool configuration item should point to a home_server_pool that was previously defined. All of the home servers in the acct_pool must be of type acct.

`pool`

If you have a home_server_pool where all of the home servers are of type auth+acct, you can just use the pool configuration item, instead of specifying both auth_pool and acct_pool.

`nostrip`

Normally, when an incoming User-Name is matched against the realm, the realm name is "stripped" off, and the "stripped" user name is used to perform matches.If you do not want this to happen, set this to true. Default: false.

`order`

Set custom order of realm fragments, otherwise they are automatically ordered alphabetically. Default: 30

`freeradius::script`

Install a helper script, e.g. which might be called upon by a virtual server. These are placed in scripts and are not automatically included by the server.

freeradius::script{ 'myperlscript.pl':
  source => 'puppet:///modules/site_freeradius/myperlscript.pl',
}

`freeradius::site`

Install a virtual server (a.k.a. site) from a flat file. Sites are installed into sites-available and automatically symlinked into sites-enabled, to ensure compatibility with package managers. Any files in this directory that are not managed by Puppet will be removed.

freeradius::site { 'inner-tunnel':
  source => 'puppet:///modules/site_freeradius/inner-tunnel',
}

`ensure`

Whether the site should be present or not.

`source`

Provide source to a file with the configuration of the site. Default: undef.

`content`

Provide content for the configuartion of the site. Default: undef.

`authorize`

Array of options (as String) for the authorize section of the site. This parameter is ignored if source or contentare used. Default: [].

`authenticate`

Array of options (as String) for the authenticate section of the site. This parameter is ignored if source or contentare used. Default: [].

`preacct`

Array of options (as String) for the preacct section of the site. This parameter is ignored if source or contentare used. Default: [].

`accounting`

Array of options (as String) for the accounting section of the site. This parameter is ignored if source or contentare used. Default: [].

`session`

Array of options (as String) for the session section of the site. This parameter is ignored if source or contentare used. Default: [].

`post_auth`

Array of options (as String) for the post-auth section of the site. This parameter is ignored if source or contentare used. Default: [].

`pre_proxy`

Array of options (as String) for the pre-proxy section of the site. This parameter is ignored if source or contentare used. Default: [].

`post_proxy`

Array of options (as String) for the post-proxy section of the site. This parameter is ignored if source or contentare used. Default: [].

`listen`

Array of listen definitions for the site. This parameter is ignored if source or contentare used. Default: [].

`freeradius::sql`

Configure SQL connections. You can define multiple database connections by invoking this resource multiple times. If you are using MySQL, don't forget to also set mysql_support => true in the base freeradius class.

freeradius::sql { 'mydatabase':
  database  => 'mysql',
  server    => '192.168.0.1',
  login     => 'radius',
  password  => 'topsecret',
  radius_db => 'radius',
}

`database`

Default: undef. Required. Specify which FreeRADIUS database driver to use. Choose one of mysql, mssql, oracle, postgresql

`server`

Default: localhost. Specify hostname of IP address of the database server.

`port`

TCP port to connect to the database. Default: 3306.

`login`

Default: radius. Username to connect to the databae.

`password`

Default: undef. Required. Password to connect to the database.

`radius_db`

Default: radius. Name of the database. Normally you should leave this alone. If you are using Oracle then use this instead: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid))).

`num_sql_socks`

Default: same as max_servers. Number of sql connections to make to the database server. Setting this to LESS than the number of threads means that some threads may starve, and you will see errors like "No connections available and at max connection limit". Setting this to MORE than the number of threads means that there are more connections than necessary. Leave blank to set it to the same value as the number of threads.

`lifetime`

Default: 0. Lifetime of an SQL socket. If you are having network issues such as TCP sessions expiring, you may need to set the socket lifetime. If set to non-zero, any open connections will be closed $lifetime seconds after they were first opened.

`max_queries`

Default: 0. Maximum number of queries used by an SQL socket. If you are having issues with SQL sockets lasting "too long", you can limit the number of queries performed over one socket. After $max_qeuries, the socket will be closed. Use 0 for "no limit".

`query_file`

query_file has been deprecated - use custom_query_file instead

Default: sql/${database}/dialup.conf. Relative path to the file which contains your SQL queries. By default, points to the dialup.conf specific to your database engine, so leave this blank if you are using stock queries.

If you need to use custom queries, it is recommended that you deploy your query file using freeradius::script to install the file into scripts/custom_dialup.conf and then set query_file to scripts/custom_dialup.conf.

`custom_query_file`

Default: null. Puppet fileserver path to a file which contains your SQL queries, i.e. dialup.conf. This option is intended to be a replacment for query_file, which requires separate deployment of the file. This option allows you to specify a Puppet-managed custom dialup.conf which is installed and loaded automatically. query_file must be left blank if you use custom_query_file.

`acct_table1`

If you want both stop and start records logged to the same SQL table, leave this as is. If you want them in different tables, put the start table in $acct_table1 and stop table in $acct_table2. Default : radacct

`acct_table2`

If you want both stop and start records logged to the same SQL table, leave this as is. If you want them in different tables, put the start table in $acct_table1 and stop table in $acct_table2. Default : radacct

`postauth_table`

Table for storing data after authentication

`authcheck_table`

Default: radcheck

`authreply_table`

Default: radreply

`groupcheck_table`

Default: radgroupcheck

`groupreply_table`

Default: radgroupreply

`usergroup_table`

Table to keep group info. Default: radusergroup

`read_groups`

If set to yes (default) we read the group tables. If set to no the user MUST have Fall-Through = Yes in the radreply table. Default: yes.

`deletestalesessions`

Remove stale session if checkrad does not see a double login. Default: yes.

`sqltrace`

Print all SQL statements when in debug mode (-x). Default: no.

`sqltracefile`

Location for SQL statements to be stored if $sqltrace = yes. Default: ${logdir}/sqllog.sql

`connect_failure_retry_delay`

Number of seconds to dely retrying on a failed database connection (per socket). Default: 60.

`nas_table`

Table to keep radius client info. Default: nas.

`readclients`

Set to yes to read radius clients from the database ($nas_table) Clients will ONLY be read on server startup. For performance and security reasons, finding clients via SQL queries CANNOT be done "live" while the server is running. Default: no.

`pool_start`

Connections to create during module instantiation. Default: 1.

`pool_min`

Minimum number of connnections to keep open. Default: 1.

`pool_spare`

Spare connections to be left idle. Default: 1.

`pool_idle_timeout`

Idle timeout (in seconds). A connection which is unused for this length of time will be closed. Default: 60.

`pool_connect_timeout`

Connection timeout (in seconds). The maximum amount of time to wait for a new connection to be established. Default: '3.0'. This parameter should only be set when using FreeRADIUS 3.1.x.

`freeradius::statusclient`

Define RADIUS clients, specifically to connect to the status server for monitoring. Very similar usage to freeradius::client but with fewer options.

`ip`

Default: undef. The IP address of the client in CIDR format. For IPv6, use ipv6addr. ip and ip6 are mutually exclusive but one must be supplied.

`ip6`

Default: undef. The IPv6 address of the client in CIDR format. ip and ip6 are mutually exclusive but one must be supplied.

`secret`

required. The RADIUS shared secret used for communication between the client/NAS and the RADIUS server.

`port`

Default: undef. The UDP port that this virtual server should listen on. Leave blank if this client is not tied to a virtual server.

`shortname`

required. A short alias that is used in place of the IP address or fully qualified hostname provided in the first line of the section.

`freeradius::template`

Define template items that can be referred to in other config items

`source`

Provide source to a file with the template item. Specify only one of source or content.

`content`

Provide content of template item. Specify only one of source or content.

`freeradius::virtual_module`

Define a virtual module which consists of one or more other modules, for failover or load-balancing purposes.

`submodules`

Provide an array of submodules which will be loaded into this virtual module. Required.

`type`

Select the type of virtual module from redundant, load-balance, redundant-load-balance or group. See virtual modules and load-balancing for more details.

# Load virtual module myldap
freeradius::virtual_module { 'myldap':
  submodules => ['ldap1', 'ldap2'],
  type       => 'redundant-load-balance',
}

Limitations

This module is targeted at FreeRADIUS 3.x running on CentOS 7. It will not work on FreeRADIUS 2.x. It has not been thoroughly tested on other distributions, but might work. Likely sticking points with other distros are the names of packages, services and file paths.

This module requires Puppet 4 or greater.

Name		Name	Last commit message	Last commit date
Latest commit History 651 Commits
.devcontainer		.devcontainer
.github/workflows		.github/workflows
.vscode		.vscode
files		files
lib/facter		lib/facter
manifests		manifests
spec		spec
templates		templates
types		types
.fixtures.yml		.fixtures.yml
.gitattributes		.gitattributes
.gitignore		.gitignore
.pdkignore		.pdkignore
.puppet-lint.rc		.puppet-lint.rc
.rspec		.rspec
.rubocop.yml		.rubocop.yml
.sync.yml		.sync.yml
.yardopts		.yardopts
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
Gemfile		Gemfile
LICENSE		LICENSE
README.md		README.md
Rakefile		Rakefile
Vagrantfile		Vagrantfile
appveyor.yml		appveyor.yml
metadata.json		metadata.json

License

pixelpark/puppet-freeradius

Folders and files

Latest commit

History

Repository files navigation

freeradius

Table of Contents

Overview

Module Description

Usage

Classes

freeradius

control_socket

correct_escapes

max_requests

max_request_time

max_servers

mysql_support

perl_support

preserve_mods

utils_support

ldap_support

dhcp_support

krb5_support

wpa_supplicant

winbind_support

log_destination

syslog_facility

syslog

log_auth

package_ensure

freeradius::status_server

secret

port

listen

freeradius::control_socket

mode

freeradius::radsniff

options

Resources

freeradius::attr

key

prefix

relaxed

freeradius::blank

freeradius::cert

type

freeradius::client

ip

ip6

shortname

secret

virtual_server

nastype

proto

require_message_authenticator

login

password

coa_server

response_window

max_connections

lifetime

idle_timeout

port

firewall

attributes

huntgroups

freeradius::config

freeradius::dictionary

freeradius::home_server

secret

type

ipaddr

ipv6addr

virtual_server

port

proto

status_check

freeradius::home_server_pool

`freeradius`

`control_socket`

`correct_escapes`

`max_requests`

`max_request_time`

`max_servers`

`mysql_support`

`perl_support`

`preserve_mods`

`utils_support`

`ldap_support`

`dhcp_support`

`krb5_support`

`wpa_supplicant`

`winbind_support`

`log_destination`

`syslog_facility`

`syslog`

`log_auth`

`package_ensure`

`freeradius::status_server`

`secret`

`port`

`listen`

`freeradius::control_socket`

`mode`

`freeradius::radsniff`

`options`

`freeradius::attr`

`key`

`prefix`

`relaxed`

`freeradius::blank`

`freeradius::cert`

`type`

`freeradius::client`

`ip`

`ip6`

`shortname`

`secret`

`virtual_server`

`nastype`

`proto`

`require_message_authenticator`

`login`

`password`

`coa_server`

`response_window`

`max_connections`

`lifetime`

`idle_timeout`

`port`

`firewall`

`attributes`

`huntgroups`

`freeradius::config`

`freeradius::dictionary`

`freeradius::home_server`

`secret`

`type`

`ipaddr`

`ipv6addr`

`virtual_server`

`port`

`proto`

`status_check`

`freeradius::home_server_pool`

`home_server`

`type`

`virtual_server`

`fallback`

`freeradius::huntgroup`

`huntgroup`

`conditons`

`type`

`home_server`

`freeradius::instantiate`

`freeradius::ldap`

`freeradius::module::ldap`

`ensure`