Merge pull request #121 from o1hitman1o/patch-1

Update Hardware_compatibility.md

content/documentation/ROCKPro64/Hardware/Hardware_compatibility.md

@@ -35,6 +35,7 @@ Please contribute to the hardware compatibility page, which lists hardware which
 | SATA Controller | PCE8SAT-A02 VER006S<br> 2 Lanes, 8-Port, ASM1166 chip<br> Odd because chip got only 6 ports? | 1b21:1166 | 6.1.50-current-rockchip64<br> Armbian 23.8.1 Bookworm | unstable | Tested with 3 disks in SW-RAID 5. After 10 hours of burn in test one disk dropped from system **and** RAID. Hotplug does not work. | User:JPT |
 | SATA Controller | BEYIMEI SATA Card 2-Port, ASM1062 chip | 1b21:0612 | 5.10.0-19-arm64 (Debian) | good | Using with 2 SSDs in a software RAID-1 array (~190MB/sec for reading and writing) |  |
 | SATA Controller | QNINE 4-Port, Marvell 88SE9215 chip |  | Ayufan-5.6.0-1137 | very slow | Tested with 3 disks in RAID 5. Top speeds were around 50 MiB/s but quickly dropped to below 2 MiB/s due to SATA CRC errors |  |
+| SATA Controller | YUNKOZAND-PCIE1X-SATA4-9215, Marvell 88SE9215 chip | 1b4b:9215 (rev 11) | Armbian 24.11.1, Kernel 6.12.12-current-rockchip64 | good | Kernel driver in use: ahci Tested with 2 disks in RAID 1. Top speeds were around 100 MB/s | User:o1hitman1o |
 | SATA Controller | DELOCK 90498, JMicron Technology Corp. JMB58x AHCI SATA controller | 197b:0585 | 5.18.0-0.bpo.1-arm64 (Debian bullseye + backports) | good, but… | Tested with 3 disks, two in RAID1, one standalone. u-boot-rockchip_2023.07 cannot initialize the controller to boot off it. | User:Lrissman<br> User:ChriChri |
 | Host Bus Adapter | LSI SAS 9211-4i<br> SAS2008 chip, 4-Port SAS/SATA, PCI 2.0, 8 lanes | 1000:0070 | Ayufan-4.4.197 | good | tested with four disks attached |  |
 | Host Bus Adapter | Fujitsu SAS MEGARAID LSI 2008B2<br> SAS2008 chip, 8-Port SAS/SATA, PCI 2.0, 8 lanes | TODO | 6.1.50-current-rockchip64<br> Armbian 23.8.1 Bookworm  | TODO | needs special MicroSAS cables. Must be flashed to HBA mode?<br> ordered, not yet received | User JPT |