Skip to content

This custom integration provides access to Rademacher Devices connected to a HomePilot (or Start2Smart) bridge.

License

Notifications You must be signed in to change notification settings

peribeir/homeassistant-rademacher

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

release downloads issues hacs_badge

logo A Home Assistant custom Integration for local handling of Devices connected to Rademacher bridge.

ATENTION: If using Home Pilot Gateway Premium, please delete and add Integration after upgrade to version 2.1.0

Hardware Support (now with support for HP Gateway Premium)

Works exclusively when devices are connected through HomePilot or Start2Smart Bridge.

Bridges/Gateways from Rademacher are fully supported.

Supports Covers, Switches, Sensors, Dimmers, Thermostats and Wall Controllers.

See full device list support at the end.

Scenes are now supported since version 2.1.0

Scenes will be automatically added as Home Assistant Scenes with "Homepilot" prefix. These scenes can be executed as any other Home Assistant Scene but cannot be edited.

Installation

1. Using HACS (now on default repositories)

HACS is a community store for integrations, Frontend extensions, etc. It makes installation and maintenance of this component much easier. You can find instructions on how to install HACS here.

Navigate to HACS in you Home Assistants Interface.

Click "Explore & Download Repositories"

Search for "Rademacher Homepilot Bridge"

Click "Download this Repository with HACS".

Select the version you wish do download and finally click "Download".

Restart Home Assistant.

2. Manually

Copy the rademacher folder into yout Home Assistant's custom_components folder. This should be located under the /config folder.

If you haven't done it already, you should create the custom_components folder on your /config.

Restart Home Assistant.

Usage

First of all, you should add the devices in you Home Pilot Application, or in the Bridge's Interface. The integration works by fetching the list that is registered in the Hub.

1. Automatic Discovery

When Home Assistant Core is running on the same sub-network as the Hub, if auto-discovery works, you'll see a notification on HA GUI stating it found new devices.

Just click "Check it Out" and you'll be presented with the Integrations page where you should see the new Rademacher Bridge entry.

Click "Configure". If you have set a password for the Hub, enter it and press "Submit".

On the next dialog, Choose any device that you may want to exclude from managing in HA. If you want to manage all, just press "Submit".

You should now be presented with Device/Entities detected, you should select the HA Area where you want to add them.

2. Using Config Flow

If Hub has not been auto-discovered, or you just deleted the integration and want to add again:

Start by going to Configuration > Integrations, then press the "Add Integration" button.

Then, search for Rademacher and select it.

In the Dialog that appears, insert the HostName/IP Address of the Rademacher Bridge. Ex: bridge.local or 192.168.1.60

Press "Submit".

If you have configured a password for the hub, you'll be asked for it. Just insert it and press "Submit".

On the next dialog, Choose any device that you may want to exclude from managing in HA. If you want to manage all, just press "Submit".

You should now be presented with Device/Entities detected, you should select the HA Area where you want to add them.

Direct and Indirect Contributors

peribeir
Pedro Ribeiro
michelde
Michel Munzert
duhow
David Girón
misa1515
Misa1515
mrweidenmr
der-berni
thmnxo4
Thmnxo4
mrweidenmr
Mrweidenmr

Supported Devices

The integration should work with the following devices (tested devices are marked in bold )

Covers

  • DuoFern tubular motor actuator (DN:35000662)
    • Tested on 9471 DuoFern Blinds Actuator
  • DuoFern tubular motor control B50/B55 (DN:31500162)
  • RolloTron Comfort DuoFern (DN:16234511_A)
  • RolloTron radio beltwinder 60 kg (DN:14236011)
  • RolloTron radio beltwinder (DN:14234511)
    • Tested on RolloTron Basis DuoFern 1200-UW Beltwinder
  • RolloTron radio swivel beltwindew (DN: 14233011)
    • Tested on RolloTron swivel winder Standard DuoFern 2510-UW
  • DuoFern tubular motor actuator environmental sensor (DN:32000064_A)
    • Tested on DuoFern Environmental Sensor Weather Station 9475
  • DuoFern tubular motor actuator (DN:35140662)
  • RolloTube S-line DuoFern (DN:23602075)
  • RolloTube S-line Zip DuoFern (DN:25782075)

Garage Covers

  • RolloPort SX5 DuoFern garage door operator (DN:45059071)

Sensors

  • Sun sensor Troll Comfort DuoFern (DN:36500572_S)
  • Temperature sensor DuoFern Radiator Actuator (DN:35003064_S)
  • Temperature sensor DuoFern Room thermostat (DN:32501812_S)
  • Sun sensor RolloTron Comfort DuoFern (DN:16234511_S)
  • Sensor DuoFern Environmental sensor (DN:32000064_S)
    • Tested on DuoFern Environmental Sensor Weather Station 9475
  • Z-Wave window/door contact (DN: 32002119)
  • DuoFern Window/Door Contact (DN: 32003164)
  • DuoFern Room Thermostat (DN:32501812_S)
    • Tested on DuoFern 9485 wireless radiator thermostat
  • DuoFern Smoke Alarm Device (DN: 32001664)
    • Tested on DuoFern 9481 Wireless Smoke detector
  • DuoFern Sun/Wind Sensor (DN:32004464)
    • Tested on DuoFern sun/wind sensor 9499

Switches

  • DuoFern Switch actuator (DN:35001164)
  • DuoFern Universal actuator 2-channel (DN:35000262)
    • Tested on 9470 Universal Actuator

Dimmers

  • DuoFern Universal dimmer (DN:35140462)
  • DuoFern Universal dimming actuator(DN:35000462)

Thermostat

  • DuoFern Room Thermostat (DN:32501812_A)
    • Tested on DuoFern 9485 wireless radiator thermostat

Wall Controllers

  • DuoFern Multiple Wall Controller BAT (DN:32501974)
    • Tested on DuoFern multiple wall switch BAT 9494-1
  • DuoFern Wall Controller 1 channel (DN:32501973)

Lights (new)

  • Zigbee LED lights through Zigbee USB-Dongle in Homepilot

About

This custom integration provides access to Rademacher Devices connected to a HomePilot (or Start2Smart) bridge.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages