Skip to content

The project is designed to work with the HTU21D sensor, using the Sensor Controller Engine of CC2640R2F MCU.

Notifications You must be signed in to change notification settings

osnatos/HTU21D-sensor-controller

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

9 Commits
 
 
 
 
 
 

Repository files navigation

HTU21D-sensor-controller

The sensor controller is designed to work with the HTU21D sensor,using the Sensor Controller Engine of CC2640R2F MCU.

  • Project name: HTU21D sensor
  • Project file: HTU21D_sensor.scp
  • Operating system: TI-RTOS
  • Target chip: CC2640R2F, package QFN48 7x7 RGZ
  • I2C0_SCL - pin 11; I2C0_SDA - pin 10

How to generate project files.

In order to generate all project files, you must:

  • Launch “Sensor Controller Studio” (SCS) using the HTU21D_sensor.scp project file.
  • In the SCS program, click on the “Code Generator” button. SCS will create a scif_files folder (if it did not exist before) and generate all the necessary files in it (except for the readme file).
  • The file “scif_htu21d_how_to_use.html” contains information on using the controller.

Software tools:

  • Sensor Controller Studio v2.7.0.155

Debugging:

  • The project was debugged on the CC2640R2-LAUNCHXL debug board.

Connection to CC2640R2-LAUNCHXL board:

  • HTU21D / pin1 - SDA / DIO5 + PULUP 10K
  • HTU21D / pin2 - GND
  • HTU21D / pin5 - 3.3V
  • HTU21D / pin6 - SCL / DIO4 + PULUP 10K

Used in the project:

About

The project is designed to work with the HTU21D sensor, using the Sensor Controller Engine of CC2640R2F MCU.

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published