elm-format-short

elm-format-short is still in alpha. If you run into any problems, please report them.

The format produced by elm-format-short may change significantly before the 1.0.0 release.
If this will cause problems for you, please refrain from using elm-format-short during the alpha- and beta-test periods.

See https://github.com/nukisman/elm-format-short

elm-format-short formats your code like elm-format but:

• Without extra blank lines
• Without extra line breaks
• Without extra indents
• With shorter and better visual representations of case-of, if-then-else, let-in, etc.

elm-format-short formats Elm source code according to a standard set of rules in shorter way than elm-format.

The benefits of elm-format-short are same as of elm-format:

• It makes code easier to write, because you never have to worry about minor formatting concerns while powering out new code.
• It makes code easier to read, because there are no longer distracting minor stylistic differences between different code bases. As such, your brain can map more efficiently from source to mental model.
• It makes code easier to maintain, because you can no longer have diffs related only to formatting; every diff necessarily involves a material change.
• It saves your team time debating how to format things, because there is a standard tool that formats everything the same way.
• It saves you time because you don't have to nitpick over formatting details of your code.

plus benefits in contrast to elm-format:

• It makes code easier to read, because you can see more code without scrolling.
• It makes code easier to navigate, because you have not to scroll needless empty space by mouse or arrows on keyboard.
• It makes code easier to write, because it is easier to read and easier to navigate.
• It makes code easier to debug, because your lines of code commented out for debug purposes are not surrounded by needless blank lines above and below.
• It saves your money, because you can still use your display. It not require you to buy new display with vertical resolution of 1000000000 pixels to see tons of blank lines.

Example formatting

See dreamwriter app by @rtfeldman:

• Editor.elm
• LeftSidebar.elm
• RightSidebar.elm
• WordGraph.elm

Usage (same as elm-format)

elm-format-short Main.elm  # Format a single file
elm-format-short Main.elm --yes  # Overwrite the file without prompting
elm-format-short src/  # Format all *.elm files in a directory
elm-format-short --stdin  # Format input from stdin and write to stdout
elm-format-short --stdin --output Main.elm  # Format input from stdin and write to file
elm-format-short --help  # See other command line options

---

Installation (currently Mac and Linux only)

npm i -g elm-format-short

IDE Integration

elm-format-short is CLI-compatible with elm-format. IDE Integration almost same as for elm-format.

JetBrains Integration

This is for WebStorm and other JetBrains IDEs.

1. Install elm-format-short
2. Install the Elm Language Plugin package.
3. Install the File Watchers plugin (available in the plugin repository)
4. Add a file watcher for .elm files with the settings as shown here.
5. Set tab/indent size to 2 spaces as shown here

---

---

TODO: Update this document for elm-format-short

Experimental version

The latest version of elm-format contains experimental features that may or may not appear in future releases. If you are able to some amount of instability on your Elm projects, you can help with the development of elm-format by using the experimental version and providing feedback. You can give feedback about the latest experimental version here.

To install the experimental version:

npm install -g elm-format@exp

or download the version appropriate for your OS from the release page, unzip it, and place elm-format or elm-format.exe (windows) on your PATH.

Editor integration

Find your editor in the table below. The recommended plugin for each editor is indicated with 🏆 (trophy emoji).

Editor	Plugin	Installation	Formatting	Format on save	Configuration	Error handling
Atom	🏆 atom-elm-format	✅ 2 steps	⚠️ must use format-on-save or save file before formatting	✅	✅	⚠️ no installation instructions
	atom-beautify	⚠️ 3 steps	✅	⚠️ requires configuration	✅	✅
Light Table	🏆 elm-light	⚠️ 3 steps	✅	⚠️ requires configuration	✅	⚠️ no installation instructions
Vim	🏆 elm-vim	❌ 6 steps	✅	⚠️ requires configuration	✅	❌ no error message
Emacs	🏆 elm-mode	❌ 4 steps	✅	⚠️ requires configuration	✅	⚠️ no installation instructions
Visual Studio Code	🏆 Elm Language Support	⚠️ 3 steps	❔ TBD	⚠️ requires configuration	❔ TBD	❔ TBD
	VSCode Elm Format	⚠️ 3 steps	❔ TBD	⚠️ requires configuration	❔ TBD	❔ TBD
Sublime Text	🏆 Elm Language Support	✅ 2 steps	❔ TBD	✅	❔ TBD	❔ TBD
JetBrains (WebStorm, etc)	🏆 Elm Language Plugin	⚠️ 4 steps	❔ TBD	✅	❔ TBD	❔ TBD

Detailed instructions

If you can simplify or improve the installation instructions or add instructions for another editor, please make a pull request. The default behavior of elm-format-approved plugins is to format Elm files on save.

atom-elm-format installation

1. Install elm-format

2. Install atom-elm-format

   apm install elm-format
   

or use the Atom package manager in Atom's settings

atom-beautify installation

1. Install elm-format

2. Install atom-beautify

   apm install atom-beautify
   

or use the Atom package manager in Atom's settings

1. Use ^⌥B (CTRL-ALT-B) to format a file

elm-light installation

1. Install elm-format
2. Install the elm-light plugin using the Light Table plugin manager
3. To format on save, edit your user keymap by performing the following:

• Click File -> Settings -> User Keymap to open the user keymap.
• Copy the following line and paste it into your keymap. Anywhere is fine as long as it is whithin the outer brackets. Ensure to save the file.

[:editor.elm "ctrl-s" :save :elm-format :elm.lint]

• Search for "App: Reload keymaps" in the Commands Window to apply the changes (or restart LightTable).

elm-mode installation

1. Install elm-format

2. If your Emacs has package.el (which is automatically the case for Emacs >= 24), you can install elm-mode from the package in MELPA:

   1. Ensure that you have added the MELPA source in your ~/.emacs.d/init.el:

      (require 'package)
      (add-to-list 'package-archives '("melpa" . "http://melpa.org/packages/"))

   2. Install elm-mode (official instructions): Use M-x list-packages and choose elm-mode.

3. Set elm-format-on-save to t to apply elm-format on the current buffer on every save. (The setting can be changed via M-x customize-variable elm-format-on-save. Click button Toggle to change the setting and button State to activate the setting.)

elm-vim installation

1. Install elm-format

2. Install vim-plug (official instructions)

   1. Download vim-plug:

      curl -fLo ~/.vim/autoload/plug.vim --create-dirs \
          https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim

   2. Make sure there is a section like this in your ~/.vimrc:

      call plug#begin('~/.vim/plugged')
      " ... any active plugins
      call plug#end()

3. Install elm-vim (official instructions)

   1. Add Plug 'elmcast/elm-vim' to the plug#begin plugin section in your ~/.vimrc
   2. Start vim and run :PlugInstall

4. Add the following to your ~/.vimrc:

let g:elm_format_autosave = 1

Visual Studio Code installation

1. Install elm-format

2. Install Elm tools for VSCode

   ext install elm

3. SHIFT-ALT-F will format the current file

VSCode Elm Format installation

1. Install elm-format

2. Install VSCode Elm Format

   ext install elm-format

3. You can run elm-format by using the Elm: Format command

4. You can also run elm-format whenever you save the file by adding formatOnSave: true option to your settings.json file.

Sublime Text installation

1. Install elm-format
2. Install the Elm Language Support package.

JetBrains installation

This is for WebStorm and other JetBrains IDEs.

1. Install elm-format
2. Install the Elm Language Plugin package.
3. Install the File Watchers plugin (available in the plugin repository)
4. Add a file watcher for .elm files with the settings as shown here.

Development info

Please note that this project is released with a Contributor Code of Conduct. By participating in this project you agree to abide by its terms.

Building from source

brew install haskell-stack
git clone https://github.com/avh4/elm-format.git
cd elm-format
stack setup
stack build
stack install
~/.local/bin/elm-format-0.18 --help

Running tests

brew install shellcheck
./tests/run-tests.sh