Skip to content

noobydp/homebridge-airtouch4-platform-dp

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

42 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

homebridge-airtouch4-platform

Homebridge plugin for the Airtouch4 AC Controller

Installation

  1. Install homebridge
  2. Install this plugin: npm install -g homebridge-airtouch4-platform-dp
  3. Update your config.json file (See below).

Configuration example

"platforms": [
	{
		"platform": "Airtouch",
		"name": "Airtouch",
		"ip_address": "192.168.0.10",
		"ac_include_temps": false,
		"units": [
			{
				"manufacturer": "LG",
				"model": "B36AWY-7G6",
				"fan": ["AUTO", "QUIET", "LOW", "MEDIUM"]
			}
		]
	}
]

Structure

Key Description
platform Must be Airtouch
name Name for the platform
ip_address Airtouch4 console IP address, can be found under "System Settings" -> "WiFi Settings", click the three-dots icon in the upper right corner, select "Advanced" in the popup menu
ac_include_temps Add zone temperature information in the AC accessory page
units Array with information about your AC units, containing:
manufacturer (optional) Appears under "Manufacturer" for your AC accessory in the Home app
model (optional) Appears under "Model" for your AC accessory in the Home app
fan (required) List with fan speeds that can be set for your AC
use_group_names (optional) Use the display names from the Polyaire groups instead of generic zone names (Warning: changing this after setup will cause zones to appear twice)

Accessories

AC - created for each AC unit (e.g. AC 0, AC 1, ...)

It uses the Homekit Thermostat service, and can set AC OFF/HEAT/COOL/AUTO and fan speed. DRY/FAN modes appear as AUTO. When using ITC sensors, zones temperature information is included.

Apple Home does not support fan speed for thermostat, so fan speed control is available only in 3rd party apps, like Elgato Eve. There are custom fields such as "Spill Active" and "Timer Set" received from the Airtouch4 console that are also available only on 3rd party apps.

Thermostat uses FakeGato service for temperature history, available only in the Eve app.

Zone - created for each Airtouch group (e.g. Zone 0, Zone 1, ...)

It uses 3 Homekit services:

  • Switch - to turn the zone ON/OFF.
  • Window - for damper control. Window in Homekit represents a motorized control that can open/close a window and can be set open to a specific position (in %). This control is the most compatible to the damper percentage control. From the Apple home interface you can set it in 5% increments, the Eve app has options only to "Open" (100%) and "Close" (0%). Damper is being set to the desired value only if zone is set to percentage control type, when using temperature control the Damper shows up as "Obstructed" and cannot be set.
  • Temperature Sensor - it's a hidden service that is only shown if you have an Airtouch temperature sensor (ITC) in the zone.

Temperature Sensor uses FakeGato service for temperature history, available only in the Eve app.

Temperature Control Thermostat - created for each group that has a sensor (e.g. Zone 0 Thermostat, ...)

It uses the Homekit Thermostat service, which can be set to:

  • OFF: set the group to percentage control mode, and use the damper control. Only current temperature from ITC sensor is available.
  • ON/AUTO: set the group to temperature control mode. Thermostat is set to AUTO mode, since only the AC unit can control HEAT/COOL modes. Used to set target temperature and automatically set damper position for the zone.

About

Homebridge plugin for Airtouch4 AC Controller

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • JavaScript 100.0%