clever_software

This is the Github for the team, Clever 11. The team has been tasked to build a working emergency ventialtor.

• The target for the code is an ESP32-DevkitC-V4 by Espressif.

Install Steps

.5 (Make sure the ESP32 board is installed to your Arduino Enviornment)

1. Install the required libs under the folder "Libraries_required."
2. Compile and Install

Things Still ToDo (not Exhasutive)

• TODO1. Build display (Make the display outline)
• TODO2. Add display manipulation
• TODO3. Add the temp sensor Variables (These are what the interrupt handler puts data into)
• TODO4. Add sensor reading
• TODO5. Add sensor declariations to the SensorIO.h file (Similar to TODO3)
• TODO6. Copy Sensor Data for Processing
• TODO7. Process sensor data and store.