This is a HACS custom integration for enphase envoys with firmware version 7 and up.
Especially made to provide extra functionality with your installer or DIY account. If you want to use the integration with a Home Owner account (with less functionality), select the option during configuration.
Features:
- Individual device per inverter with all information available.
- Individual device per Q-relay with relay status.
- Individual device per battery with information available.
- Production switch to turn on/off solar power production. 1️⃣
- Firmware update sensor.
- 3 Phase CT readings.
- "Realtime" updates of CT readings.
- Configurable polling interval.
- Optional negative production reading correction.
- Service call to retrieve and set grid profile.
1️⃣ Some Enphase installations suffer from an issue where production only restarts the next morning. This is not an issue with this integration.
Or follow these steps:
- Install HACS if you haven't already
- Add this repository as a custom integration repository in HACS
- Restart home assistant
- Add the integration through the home assistant configuration flow
Based on work from @briancmpbll