Skip to content

Plan 9 from User Space (plan9port) configuration

Notifications You must be signed in to change notification settings

matheuristic/plan9port-config

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

plan9port-config

Plan 9 from User Space (plan9port, p9p) configuration

About

This repository contains a configuration for Plan 9 from User Space, which is a port of several Plan 9 tools to Unix systems.

Most of this configuration will be built around Acme and Sam, the two Plan 9 text editors.

The shell commands here are for a POSIX-compatible shell or similar (e.g. Bash or Zsh).

Installing plan9port and configuring it

Code patches

There are some patches in the patches subdirectory. Apply desired patches to the source code prior to compilation. See the README.md file in the subdirectory for instructions.

  • plan9port-acme-bindings.patch: Adds C-k, C-n, C-p, Cmd-a and Cmd-s Acme key bindings for their usual Linux and macOS actions, and Cmd-m, Cmd-. and Cmd-/ bindings to execute text (like Button2), backward-search/plumb text (like Shift-Button3) and forward-search/plumb text (like Button3) respectively.
  • plan9port-acme-extrafilechars.patch: Allow round and square brackets and tildes in file and directory names in Acme.
  • plan9port-acme-soft-tabs.patch: Adds soft tabs support to Acme toggleable via a Spaces [on|off|ON|OFF] command and an -i CLI option.
  • plan9port-acme-windowtitle.patch: Adds a -t TITLE CLI option for setting the window title of a launched Acme instance.
  • plan9port-bdf2subf.patch: Adds bdf2subf to the plan9port source tree that will be compiled when running the INSTALL script.
  • plan9port-keyboard-addrunecomposeseq.patch: Adds new keyboard compose sequences for typing runes. See patches/README.md.
  • plan9port-mac-nofullscreenautohidemenu.patch: Reverts changes to GUI window fully hide menubar when fullscreen behavior.
  • plan9port-mac-noquotemap.patch: Remove the remapping of chars ` and ' to and in macOS fontsrv.

Compiling plan9port

The following instructions are for a system-level install at /usr/local/plan9 or a local install at $HOME/.local/plan9. Change the target directory as desired. See install.txt for what compile-time dependencies need to be installed.

System install (for all users):

cd /usr/local
sudo git clone https://github.com/9fans/plan9port.git plan9
cd plan9
sudo ./INSTALL

Local install (for the current user, creating a new git branch is for easier updating, and code patches should be applied after the git checkout step):

mkdir -p $HOME/.local
cd $HOME/.local
git clone https://github.com/9fans/plan9port.git plan9
cd plan9
git checkout -b "build-$(date +%Y%m%d)"
./INSTALL -b
./INSTALL -c

Follow the instructions to set $PLAN9 and add $PLAN9/bin to $PATH for the user shell. Note that for Bash, if the plan9port install location is /path/to/plan9port, adding the suggested

PLAN9=/path/to/plan9port export PLAN9
PATH=$PATH:$PLAN9/bin export PATH

to the profile (~/.bashrc or ~/.profile) works, but for Zsh

export PLAN9=/path/to/plan9port
export PATH=$PATH:$PLAN9/bin

should be added instead (to ~/.zshrc or ~/.zprofile).

Setting up base configuration files

Use GNU stow from the repository root directory to symbolically link the base configuration files and helper scripts to the corresponding user config locations.

stow -t $HOME --dotfiles --no-folding stow

This will create the symlinks:

  • ~/lib/guide: Basic guide file example.
  • ~/lib/plumbing: Plumbing file for controlling the behavior of plumber.
  • ~/.local/bin/acmeactivens.sh: Outputs the namespaces /tmp/ns.$USER/* for which there is a running instance of Acme.
  • ~/.local/bin/startacme.rc: Launcher for Acme.
  • ~/.local/bin/startsam.rc: Launcher for Sam.
  • ~/.local/bin/sample-pylsp: Sample wrapper showing how to run Python LSP Server installed in a Conda environment. Of utility when using acme-lsp.
  • ~/.local/bin/startacme.sh: Wrapper to run startacme.rc via rc.
  • ~/.local/bin/startsam.sh: Wrapper to run startsam.rc via rc.
  • ~/.acme/bin/*: Various helper scripts for Acme.

If additional launcher customization is needed, copy startacme.sh to ~/.local/bin/startacme.sh (or similarly for startsam.sh) instead of symlinking, and modify the copy as desired.

Acme

Acme is a mouse-centric Plan 9 editor. It works best with a 3-button mouse, although keyboard modifiers can be used to simulate secondary mouse buttons on systems without a 3-button mouse (like laptops with touchpads).

See 9 man 1 acme for information about the Acme graphical user interface, 9 man 4 acme for information about interacting with Acme using its file interface (useful for writing scripts that integrate with Acme), and 9 man 1 sam for information about the Sam command language which is supported within Acme through its Edit command.

Acme fonts

The default main font is /lib/font/bit/lucsans/euro.8.font (corresponding to the file $PLAN9/font/lucsans/euro.8.font) and the default alternate font is /lib/font/bit/lucm/unicode.9.font (corresponding to the file $PLAN9/font/lucm/unicode.9.font). Many users typically use a proportional-width main font and a fixed-width alternate font.

The following options can be specified when running the acme command to change the main or alternate fonts:

  • -f /path/to/main/font to set the main font.
  • -F /path/to/alt/font to set the alternative font.

Example of running Acme with different fonts:

acme -f /lib/font/bit/pelm/unicode.13.font -F /mnt/font/GoMono/18a/font

Fonts can also be changed for a given Acme window by executing the Font command in that window. Executing Font by itself toggles between the main and alternate fonts. Executing with a font presented by Plan 9 as an argument as in Font /path/to/presented/font loads the specified font.

See the Fonts section for more information on Plan 9 fonts and how they are presented as files in Plan 9 either normally (Plan 9 bitmap fonts) with fontsrv (host system vector fonts).

Saving and loading sessions

Use Dump /path/to/dump/file and Load /path/to/dump/file to save and load sessions when in Acme. If a path is not provided, the dump path defaults to ~/acme.dump.

Acme can be launched with the -l /path/to/dump/file option to load a specific session dump file on startup. Example:

acme -l /path/to/project/acme.dump

Autosaving

If stow was used to symlink the base configuration files, a script to help with autosaving modified files that have yet to be written can be found at ~/.acme/bin/Asave. This script is designed to be run from within Acme so that it will automatically exit when Acme exits.

Autosaved modified files are stored in ~/.acme/autosave/ by default, with their filenames as the full path after replacing / with %, (spaces) with +, and (tabs) with =. Once a file is saved and therefore clean, its autosaved version will be autoremoved.

Guide files

Guide files are text files that contain sample commands for invoking commands. When appropriate, the proper command can be looked up from a guide file, copied and/or edited as needed, and executed. It is common practice to keep a guide file open in a smaller side column window so commands that commonly used can be accessed readily.

If stow was used to symlink the base configuration files, a master guide file will be available at ~/lib/guide containing a wide array of commands and examples.

Useful bundled commands

plan9port comes with several useful commands for working with Acme (and Sam):

  • B: Opens file in a new window inside Acme (or Sam).
  • E: Opens file in a new window inside Acme (or Sam), returning control to the calling process after editing is done. Can be used as $EDITOR so commands that use it to open an editor in a sub-process do so using Acme, e.g. EDITOR=E git commit -a. See link for examples.

Helper scripts

If stow was used to symlink the base configuration files, there are a number of helper scripts available at ~/.acme/bin:

  • acmeexec: Execute (Button2) some text in specified Acme window number (defaults to number of current Acme window).
  • alink (source): alink name cmd arg1 ... creates a new window named name and executes cmd in it with the given args.
  • Asave: Saves modified (i.e. unsaved) files in the running Acme instance to an autosave directory intermittently. See the subsection Autosaving above.
  • Arecentf: Prints the most recently opened files logged to $HOME/.acme/recentf by Atrackf, up to a specified number (defaults to 20 if not specified), from least recent to most recent.
  • Atrackf: Monitors the Acme log, and append the name of each file as it is opened to $HOME/.acme/recentf or specified file. If using, it is best to run at the start of each Acme session.
  • c+: Comment. Specify an argument to change the comment prefix from the default #.
  • c-: Uncomment. An argument may be specified as in c+.
  • condarun: condarun envname cmd arg1 ... executes cmd with the given args in the envname Conda environment (default environment is the one active when Acme was launched, else base).
  • Clean: Clean 'REGEX' deletes clean Acme file windows with names matching the given regular expression. If no regular expression is provided, then all clean Acme file windows are deleted.
  • codepv: Preview current Acme window code file in a browser.
  • Conf: Conf LANGUAGE configures the current Acme window for the specified programming LANGUAGE. Run Conf (without a language) for supported languages.
  • ct: ct COLUMNNUMBER COMMENTPREFIX adds COMMENTPREFIX at COLUMNNUMBER in each line of STDIN or text piped to the command.
  • d: Diff the current window against the current file on disk, needs GNU diff (default on Linux; on macOS, install MacPorts diffutils).
  • dtw: Delete trailing whitespace (spaces/tabs).
  • EC: Load EditorConfig indentation settings (spaces or tabs, and width of each indent level) for the current Acme window based on filename.
  • ff: Wrapper around fzf for fuzzy finding files based on filename. Also requires ripgrep be installed.
  • F: Print Acme window font or set/increase/decrease its size. Setting, increasing and decreasing font size only works if the current font is a variable font served by fontsrv.
  • F+: Wrapper around F that increases the current Acme window's font size by a given number of points (defaults to 1 if called with no arg), assuming the screen is a low-DPI one. Only works if the current font is one served by fontsrv.
  • F-: Like F+ but decreases font size instead of increasing it.
  • F++: Like F+ but assumes the screen is a high-DPI one.
  • F--: Like F+ but decreases font size instead of increasing it, and assumes the screen is a high-DPI one.
  • Fcycle: Cycles between a preset list of fonts in the fontlist environment variable (if $fontlist is empty or undefined, falls back to a hardcoded list of presets).
  • gb: Wrapper for git blame of file in current Acme window.
  • gl: Wrapper for git log of file in current Acme window.
  • ghurl: Hurl the specified or current Acme window file in current or given branch to a web browser.
  • git: Wrapper for git that automatically sets the GPG_TTY environment variable when in a TTY. Note that the pinentry program used by GPG should be set to pinentry-tty, see comments in the script file for more info.
  • h: hcount=N h STRING shows the last N commands in a win window that contain STRING. If hcount=N is omitted then the last 10 matching commands are shown. If STRING is omitted, then the most recent commands are show (i.e., match all commands).
  • hn: Command-line HN client.
  • hrule: Prints to stdout a horizontal line of a given length (defaults to 70) using a given character (defaults to ).
  • ishidpi: Prints to stdout 1 if screen is high DPI or 0 otherwise.
  • lower: Lowercase text selection.
  • lw: List Acme windows (including window ID, whether the window is a directory window, and if the window is dirty). A fancier version of running the Edit X Sam command.
  • mdlink: Convert URL to Markdown link labeled with its page title.
  • mdpv: Preview current Acme window Markdown file in a browser.
  • mvto: Rename current Acme window file, and updates the tag after. Uses git mv if the file part of a Git repository, mv otherwise.
  • noansi: Strip ANSI color codes from stdin, write result to stdout.
  • rg+: Wrapper for running ripgrep with output that can be plumbed. Note that for modified open files in Acme, the saved version of the file is searched.
  • rg-: Wrapper for running ripgrep on the current Acme window's contents with output that can be plumbed. Note that this will search the unsaved modified contents if the window is dirty (i.e., modifications made but not yet saved to file).
  • rg--: Like rg- but for all Acme windows corresponding to files.
  • runfc: >runfc cmd arg1 ... will copy the text selection to a temporary file, run a command cmd that modifies the temporary file in-place (like Python's black formatter) and output the temporary file to the Error window. Use | instead of > to replace the text selection with the result instead of outputting to the Error window.
  • s+: Indent by adding leading spaces, specify an argument to change the number of spaces from the default of $tabstop.
  • s-: Unindent by removing leading spaces, specify an argument to change the number of spaces from the default of $tabstop.
  • s2t: Replaces leading spaces with tabs, specify an argument to change number of spaces to a tab from the default of $tabstop.
  • sp: Wrapper to run Hunspell spellchecker on the current Acme window with plumbable output.
  • Slide: Start slideshow for current directory, where the slides are text files and slide sequence is given by an index file containing filenames of the text files (with no leading directories) with one filename per line and no empty lines.
  • Slide+: Next slide, to be used with Slide.
  • Slide-: Previous slide, to be used with Slide.
  • surround: Add surrounding brackets, specify a left-side arg (e.g. { , [ , $ , < , and so on) to use a specific bracket pair other than the default round parentheses ( and ).
  • t+: Indent by adding leading tabs, specify an argument to change the number of tabs from the default of 1.
  • t-: Unindent by removing leading tabs, specify an argument to change the number of tabs from the default of 1.
  • t2s: Replaces tabs with spaces. Specify an argument to change the number of spaces to a tab from the default of $tabstop.
  • uline: Underline text selection. Specify an argument to change the character for underlining from the default of '-'.
  • uncase: Convert an alphanum string to a case-insensitive regexp.
  • upper: Uppercase text selection.
  • w+: Wrap (format text so each line is under some width in chars), specify an arg for a width other than the default of 70.
  • w-: Unwrap (join text across multiple lines into one line).

Optional tools

  • Go: Some tools below require Go to install or run. Installable via a package manager (e.g. APT or Homebrew or MacPorts), or download a binary release from the website.

  • Rust: Some tools below are compiled with Rust tooling. These use the cargo command. To install Rust tooling, see link.

  • acmego: When Go files are written, automatically makes adjustments in the window body to the import block as needed using goimports but does not write the file. Also supports autoformatting Rust files using rustfmt. An alternative that works on any Acme window using any given command is acme-autoformat. There are also several forks of acmego that extend it to format code files other than Go and Rust ones.

  • Language Server Protocol client. Two options (current preference is acre):

    • acme-lsp

      Can be installed with:

      GO111MODULE=on go install 9fans.net/acme-lsp/cmd/acme-lsp@latest
      GO111MODULE=on go install 9fans.net/acme-lsp/cmd/L@latest

      Some helper scripts for acme-lsp can be created while in the rc shell from a $path dir, say $home/.acme/bin/, and running:

      for(cmd in comp def fmt hov impls refs rn sig syms type assist ws ws+ ws-){
        > L^$cmd {
          echo '#!/usr/bin/env rc'
          echo exec L $cmd '$*'
        }
        chmod +x L^$cmd
      }

      Configure acme-lsp via CLI params or a TOML file $HOME/Library/Application Support/acme-lsp/config.toml (macOS) or $HOME/.config/acme-lsp/config.toml (Unix/Linux). A sample config is provided in the repo at stow/dot-config/acme-lsp/config.toml.

      The stow/dot-acme/bin/LSP script LSP starts acme-lsp with additional workspace dirs set based on the current dir.

    • acre

      Can be installed with (change paths or versions as needed):

      cd /some/path
      curl -LO https://github.com/mjibson/acre/archive/refs/tags/v0.5.5.tar.gz
      tar xzf v0.5.5.tar.gz
      cd acre-0.5.5
      cargo install --path $PWD
      cd ~/.local/bin
      ln -s /some/path/acre-0.5.5/target/release/acre

      Acre does not auto-detect workspaces (link) so paths to project workspaces should be added to the config file at $HOME/.config/acre.toml as needed. A sample config file is provided in this repo at stow/dot-config/acre.toml that uses gopls, ruff-lsp, rust-analyzer and zls for Go, Python, Rust and Zig code (note that no workspace paths are specified).

  • AI: Interact with the OpenAI ChatGPT endpoint from Acme.

    To install:

    git clone https://github.com/rogpeppe/AI.git
    cd AI
    go install .

    To use, set the OPENAI_API_KEY environment variable with an API key. In Acme, run AI 'instruction...' to ask ChatGPT to perform the instruction (replace instruction... appropriately) with some selected text as context, or AI -c instruction... for the same but with the whole file as context. This replaces the selected text (or entire file if using the -c option) using the first code block in the response. If working with regular text or markdown, it may be necessary to end the instruction with Put your response into a markdown block or something like it.

    An alternative is acmegpt. This is a direct chat using the OpenAI API in a separate window. Compared to AI, it does not utilize any selected text as context (it has a chat UX so any extra context needs to be copy-pasted) but the chat has history so answer followups and refinements are possible. It also requires the OPENAI_API_KEY environment variable to be set.

  • awww: Text web browser for Acme. Button2 or Button3 opens links in opened webpages. Requires wget and rust-html2text (compile its example program examples/html2text.rs).

  • bdf2subf (source, usage): Patch for plan9port that builds BDF to plan9 font converter tool bdf2subf (alt) during INSTALL. A copy of this patch is included in the patches directory, see README.md in that directory for how to apply it.

    Usage:

    bdf2subf -f somefont.bdf > somefont.font  # generate font file
    bdf2subf somefont.bdf                     # generate subfont files

    Example (POSIX shell):

    mkdir -p /path/to/lib/font/gohufont
    cd /path/to/lib/font/gohufont
    curl -LO https://github.com/hchargois/gohufont/raw/master/gohufont-uni-14.bdf
    curl -LO https://github.com/hchargois/gohufont/raw/master/gohufont-uni-14b.bdf
    for f in *.bdf; do bdf2subf -f $f > $(basename $f .bdf).font; bdf2subf $f; done
  • dirtree: Tree-style file explorer for Acme. Button2 on a directory in a dirtree window will set that directory as the new tree root. Button3 on a directory will toggle listing of its contents, and on a file will plumb it as usual. Install dirtree with:

    go install github.com/sminez/acme-corp/dirtree@latest

    Alternatives include adir which can be installed, assuming $PLAN9 and mk are on the system path, with:

    git clone https://github.com/lewis-weinberger/adir.git
    cd adir
    mk install BIN=$home/.acme/bin

    (No need to specify BIN=$home/.acme/bin if installing to $PLAN9/bin.)

    Other alternatives include xplor or its Go port.

  • editinacme (Github): Command usable as the EDITOR environment variable, which uses plumber to open a specified file in Acme and waits for that file's window in Acme to be closed before exiting. To install:

    go install 9fans.net/go/acme/editinacme@latest
  • gemini: Interact with the Google Gemini API endpoint from Acme.

    More info.

  • issue (Github): Acme client for reading and updating Github project tracker issues. Note that the project repo defaults to golang/go so use the -p CLI option to specify the appropriate project. In Acme, issues for a given Github project can be searched by executing a command like issues -a -p <OWNER>/<REPOSITORY> <QUERY>. Example plumbing rule:

    # matches '<OWNER>/<REPOSITORY>/issues/<ISSUENUMBER>'
    type is text
    data matches '([0-9a-zA-Z]+)/([0-9a-zA-Z]+)/issues/([0-9]+)'
    plumb to githubissue
    plumb client issues -a -p $1/$2 $3
    

    Install using go install rsc.io/github/issue@latest. This program requires a Github personal access token be written to the file $HOME/.github-issue-token, and the token needs to have the scope repo for public repositories or private_repo for private ones.

  • I: Make CLI tools interactive in Acme. Running I <cli> to execute the command in a new window, where Button2 on window text will append the clicked text as a new arg and rerun the command, Button2 on Back will remove the newest arg and rerun, and Get will rerun the command as is.

  • Jira (Github): Acme client for reading and updating Jira issues. See package website or repository for how to set up appropriate plumbing rules.

  • match-paren or paren-matcher: Takes stdin and inserts closing parentheses at the end to balance out opening parentheses. match-paren is implemented in C while paren-matcher is implemented in Common Lisp and requires SBCL. Can be useful when writing Lisp code.

  • Nyne: Tools for Acme, including nynetab which expands tabs and indents text (best used with a hotkey daemon like skhd or sxhkd), and md for working with Markdown text and files.

  • punt: Send window contents to a external program from Acme (e.g., to make edits in another editor or to view HTML in a browser) and sync changes back to Acme window after external program is closed. Install with:

    go install github.com/sminez/acme-corp/punt@latest

    Usage example: punt -e xterm nvim or punt -g emacsclient from the tag of the window to punt to the external program. The -e option indicates the external program is to be run in the specified terminal emulator, while the -g option indicates the external program is a GUI one.

  • uni: Command-line tool for looking up the Unicode database. An alternative is Unicode (installable using go install robpike.io/cmd/unicode@latest).

  • Watch: Runs a given command each time any file in the current directory is written and send the output to an Acme window whose name is the current directory with a /+watch suffix. Executing Del in this new window will close the window and end the Watch process. It also provides Kill and Quit commands that can be used with the command run by Watch (the command is echoed in the first line of the new window) to stop any Watch commands that stall. Watch is using for automatically linting or running tests when files are written. Install Watch with:

    go install 9fans.net/go/acme/Watch@latest

    To have Watch run a command when a file in the directory of an Acme window, execute Watch [-r] cmd arg1 ... in the window (if the -r flag is not specified, only the current directory is watched; if the -r flag is specified then Watch is run recursively, i.e. all subdirectories are also watched).

  • 9pfs: Replacement for plan9port 9pfuse that is supposed to be faster.

Using POSIX-compatible shells like Bash and Zsh with win

  • Add the following snippet to the configuration of a POSIX-compatible shell so cd-ing into a new directory in win (for running shells in Acme) when using that shell updates the tag line with the new directory. This is $HOME/.bashrc for Bash or $HOME/.zshrc for Zsh. Can be adapted for shells that are not POSIX-compatible like fish.

    # Update Acme window tag line with dir in which it's running
    if [ "$winid" ]; then
      _acme_cd () {
        builtin cd "$@" && awd
      }
      alias cd=_acme_cd
    fi
  • Additionally, for better integration with win windows make sure to handle dumb terminals (TERM=dumb) appropriately (e.g. don't use any color escape codes). For instance, in Zsh the following can be added to the $HOME/.zshrc file.

    # No fancy Zsh prompt when using dumb terminals
    if [[ "$TERM" == "dumb" ]]; then
      unsetopt zle
      unsetopt prompt_cr
      unsetopt prompt_subst
      if whence -w precmd >/dev/null; then
        unfunction precmd
      fi
      if whence -w preexec >/dev/null; then
        unfunction preexec
      fi
      # Set prompt so middle-clicking whole line reruns line's command
      # Show last exit code if non-zero
      PROMPT=": %(?..{%?} )%m; "
      RPROMPT=""
    fi
  • To have Acme win windows use a specific shell by default, start Acme with the SHELL environment variable appropriately set. For example, visibleclicks=1 SHELL=zsh startacme.rc starts Acme using the startup script in this repo with visible button clicks and Zsh as the default shell.

FUSE

Acme can be called with the -m option to have Acme use FUSE to mount itself at a given mountpoint. This allows other programs that don't have or don't allow direct shell access (i.e. cannot call 9p) to interact with Acme. Example:

acme -m /path/to/mtpt

Note that on macOS, mounting Acme at most locations can lead to random spawning of empty windows. This is because fseventsd will scan mounted filesystems periodically, and in this case it reads e.g. /mnt/acme/new/ctl which spawns a new window. To avoid this, the Acme filesystem has to be mounted outside of /User with MNT_DONTBROWSE set on it. Mounting Acme at a directory in /tmp satisfies this, so mounting Acme on macOS should be done with this in mind. For example:

acme -m /tmp/acme

For more information on Acme mounting and macOS, see the following Github issue.

Working with remote files

One way to work with files on remote systems is by mounting remote filesystems to a local mountpoint using rclone mount, so remote files can be worked with as if they were local files.

Many remote storage backends are supported, like Azure Blob Storage, HDFS, SFTP, S3, etc.

An alternative is to mount NFS over SSH, though that requires superuser permissions and user and group ids be the same across systems, see here, here, and here.

Usage tips

  • Middle-clicking (Button2) executes the region or word under the point. Right-clicking (Button3) will plumb the region or word under the point, or search (equivalent to Look) for the next occurrence if not plumbable.

    • Right-click on :+/[Ff]oo/ to search forward for foo or Foo.

    • Right-click on :-/[Ff]oo/ to search backward for foo or Foo.

    • Right-click on :42 to jump to line 42.

    • Right-click on file:somefile to open somefile in a browser.

  • The window scrollbars are used in conjunction with the mouse for moving the viewport across the buffer.

    • Left-clicking (Button1) and right-clicking (Button3) on the scrollbar moves the viewport up and down respectively where the clicks near the top of scrollbar move the viewport less and clicks near the bottom of the scrollbar move the viewport more. Specifically, clicking Button1 on the scrollbar moves the top line of the viewport to that horizontal location and clicking Button3 on the scrollbar moves the line at that location to the top of the viewport.

    • Middle-clicks (Button2) on the scrollbar will move the viewport so that the view indicator is at the position scrollbar was clicked, which allows for directly jumping to a window position.

  • Double-clicking (Button1 twice) just to the right of a left brace ({), bracket ([) or parenthesis ((), or just to the left of a right brace (}), bracket (]) or parenthesis ()) will select the text within paired braces, brackets or parentheses. This also works for text between greater than (>) and smaller than (<) chars. Example text:

    (some text between (parentheses))
    [same thing within brackets
      but also across lines]
    <div>some <em>XML</em> or <em>HTML</em> text</div>
    
    • Wrap a command with brackets or parentheses to make it selectable by double-clicking as described above. Useful for easy selection of commands containing spaces. For example:

      (Load /path/to/project.dump)
      
  • Mouse chording (pressing mouse buttons in a sequence without releasing them) can be used to perform a number of actions.

    • The 1-2 chord (press Button1 and hold, then press Button2) executes Cut, i.e. remove selected text and overwrite the snarf buffer with it.

    • The 1-3 chord executes Paste, i.e. insert the contents of the snarf buffer at the point or over selected text.

    • The 2-1 chord will execute the current selected text using the previously selected text as an appended argument.

    • The 2-3 and 3-2 chords do not do anything, and can be used to get out of an unintended button press.

  • A separate window can be useful for writing and maintaining a history of commands. A handy use of this separate window is to write commands to be run with Edit, and execute them by highlighting the commands followed by a 2-1 chord on Edit in a target window's tag (note that Edit is not added to window tags by default). For example, write ,|s/abc/xyz/g in a side window, highlight it and use a 2-1 chord on Edit in the target window's tag in order to replace all instances of abc with xyz.

  • A start file or a bookmarks file with pre-defined Load lines or paths to specific files can enable quick loading of project workspace dumps. The startacme.sh launcher will open this file by default when no extra options are provided. An example of a start/bookmarks file follows.

    # ~/.acme/start - Acme start file
    
    # Project workspaces
    
    [Load /path/to/project1.dump]
    [Load /path/to/project2.dump]
    
    # Bookmarks
    
    /path/to/guide
    /path/to/folder1/
    /path/to/folder2/
    /path/to/file1
    /path/to/file2
    
  • For each project to create a project-specific guide file and copy into it a subset of the more useful commands for the project from the master guide file along with adding other project-specific commands (like compile or testing scripts). Have the guide file open in an Acme window for running specific project commands or for copying useful commands to add to a buffer window's tag.

  • Create project-specific dump files so it is easy to save and load work sessions. The corresponding Dump and Load commands (with the appropriate dump file path) can be added to that project's guide file or to the main Acme tag. It is recommended to store dump files either in the project directory or in a separate directory like ~/.acme/dump/ that consolidates dump files across projects. When working with Git-controlled projects, the latter is better as it avoids polluting the Git repository with machine-local data.

  • To evaluate selection in a REPL running in some win window, Snarf (1-2-3 chord) the selection, then execute Send in the REPL window.

  • Alternative command-line launchers for Acme (e.g. ones that use specific fonts or loads a given dump file) can be created as aliases, e.g. for Bash

    alias aproj='visibleclicks=1 $PLAN9/bin/rc $HOME/.local/bin/startacme.rc -f /mnt/font/GoRegular/15a/font -F /mnt/font/GoMono/15a/font -l /path/to/proj/acme.dump'

    or for rc

    fn aproj { visibleclicks=1 $home/.local/bin/startacme.rc -f /mnt/font/GoRegular/15a/font -F /mnt/font/GoMono/15a/font -l /path/to/proj/acme.dump }
  • Window management can get chaotic when there are many open. Listing and finding windows can be done with the Edit X Sam command or $HOME/.acme/bin/lw (or the original upon which it is based) and plumbing with Button3 (right-click). Managing windows can be done by executing Sort to sort the windows in a column by their tags.

  • There is no shift-click semantics in Acme (click on a position A, then shift-click on another position B to selection the region from A to B). As a workaround:

    1. Run Edit =# (or Edit =) at a file location to print the file's name and character address (or line number) of the cursor in a +Errors window. If desired, add a forward search query /REGEXP/ to the end. This sets the region start location.

    2. Click on a later position in the file.

    3. In the +Errors window, append ,. to the end of the file and line location (plus forward search query, if applicable).

    4. Button3 (right-click) on the resulting line in the +Errors window to plumb it, which will select the file region specified.

    The final line in the +Errors window to be plumbed will look something like /path/to/file:#10,. or /path/to/file:#10/text/,. (or /path/to/file:10,. or /path/to/file:10/text/,.), matching the plumbing pattern FILEPATH:STARTLOCATION,ENDLOCATION with the character address (or line) from the Edit command and the cursor location . used for the start and end locations.

Typical setup and workflow

Setup:

  • Follow the setup as described above, applying the desired patches prior to building.
  • Install supporting programs.
    • For the scripts in $HOME/.acme/bin, these would be GNU coreutils, Conda, fzf, git, ripgrep, or mamba, par if preferable to GNU coreutils' fmt, and enchant if spell checking is needed.
    • For direct helper programs, these would be acme-lsp (along with the relevant LSP servers), Watch, and any other programs desired (see the Optional tools subsection above). Also, other tools like code search and cspell are useful.
    • Install gcat to support plumbing Gemini URLs gemini://... with output to +Errors.
    • Install pandoc to preview Markdown files with the mdpv script and code files with the codepv script.
    • Also install curl, gawk and jq so hn can be used to plumb HN URLs to the +Errors window.
  • Set up an Acme launcher app (macOS) or desktop entry (Linux) to make launching Acme easier.

Usage:

  • Launch Acme
  • Load a dump file to restore a previous session
  • Execute Atrackf to log opened files to $HOME/.acme/recentf
  • Execute Asave to autosave dirty (i.e., modified and unsaved) files to $HOME/.acme/autosave
  • If needed, execute Arecentf to list recently edited files
  • If editing code:
    • Execute Indent on in a window tag if appropriate
    • Populate the window tag with useful commands, at least Edit, :0 and :$.
    • If working on a Git version-controlled project, create a guide file in the repository root as a space for putting useful commands or as scratch. Add /guide to .gitignore.
    • Useful Edit commands can be added to guide, and they can be used using by 2-1 chording to Edit to a file window tag.
    • Change the font by executing Font (or using the F script) in the window tag.
    • If there is an EditorConfig setting for the project, execute EC in the window tag.
    • Search code backwards and forwards by right-clicking :/[Ff]oo' and :-/[Bb]ar` in the window tag.
    • Get all search results within a file by middle-clicking rg- '[Ff]oo' which pops up the results in an error window.
    • Get all search results across all files in the directory tree by middle-clicking rg+ '[Ff]oo' which pops up the results in an error window.
    • To enable a write-compile-debug loop, middle-click Watch with the appropriate arguments. Error locations can be plumbed to open the appropriate code file and line.
    • Middle-click acme-lsp to launch it for a window's project. It is best to work on one project at a time when using acme-lsp.
    • Git commands can be run from the guide file, or from the window tag. Run gl or gb to see Git log or blame for the focused window file.
  • When done with a session, Dump it to a file so it can be reloaded and continued later.

Sam

Plan 9 also comes with another editor Sam that is the predecessor of Acme, but has the benefit of having a client-server that can be better suited for remote file editing under high network latency.

See 9 man sam for more information about using the Sam editor.

Plumber

Plan 9 and plan9port has a message passing mechanism called plumbing, and plumber processes plumbed messages and does dispatching. For example, it is what enables Button3 (right-click) presses on compile errors in Acme to jump to the corresponding file and line.

Plumbing rules should be specified in $HOME/lib/plumbing. If it does not exist, then the default plumbing rules are loaded from $PLAN9/plumb/initial.plumbing. An example plumbing file is show below, and it defines a plumbing rule for navigating to file locations in Python errors and also loads the default rules.

# to update: cat $HOME/lib/plumbing | 9p write plumb/rules

editor = acme

# python errors
type is text
data matches ' *File "([a-zA-Z¡-�0-9_\-./]+)", line ([0-9]+).*'
arg isfile $1
data set $file
attr add addr=$2
plumb to edit
plumb client $editor

# include basic plumbing rules
include basic

See 9 man 7 plumb for more information about plumbing rules.

plumber is not started by default in plan9port applications, so it has to be started in a launch script or manually. The rc command below starts plumber if it is not running in the current namespace.

9p stat plumb >[2]/dev/null >[1=2] || 9 plumber

See 9 man 4 plumber for more information about plumber.

Plumbing rules can be updated without restarting plumber via a Plan 9 mount point (change /path/to/plumbing below as appropriate, e.g. $home/lib/plumbing to reload user-specific rules after an update).

cat /path/to/plumbing | 9p write plumb/rules

Fonts

plan9port comes with the Plan9 bitmap fonts, which are in the $PLAN9/font directory. For backwards-compatibility with Plan 9 scripts, plan9port automatically translates paths beginning with /lib/font/bit to paths $PLAN9/font. Font paths typically follow the convention $PLAN9/font/NAME/RANGE.SIZE.font or /lib/font/bit/NAME/RANGE.SIZE.font where NAME is some name for the font, RANGE gives an indication of the available characters and SIZE is the approximate height of the font in pixels. For example, $PLAN9/font/lucsans/unicode.10.font or /lib/font/bit/lucsans/unicode.10.font is the lucsans font for the Unicode character set at a size of around 10 pixels high. Generally, either the real filesystem path or backwards-compatible Plan 9 path can be used to specify a Plan 9 bitmap font. See 9 man font for more information.

Fonts from the host system can also be used via fontsrv, which makes those fonts accessible in the Plan 9 format at a given mountpoint (default /mnt/font in the Plan 9 filesystem). fontsrv should be built by default. If not, it can be built by running 9 mk install in the $PLAN9/src/cmd/fontsrv directory.

When fontsrv is running, available host system fonts can by listing the font "directory" in the Plan 9 filesystem.

fontsrv &
9p ls font

fontsrv presents fonts at paths /mnt/font/FONTNAME/SIZE[a]/font where FONTNAME is the name of the font, SIZE is the point size of the font, and where the font is anti-aliased if SIZE is suffixed with an a or non-anti-aliased if it is not. For example, the font presented by fontsrv at path /mnt/font/Iosevka/20a/font is Iosevka font, Regular weight, at point size 20 and anti-aliased. See 9 man fontsrv for more info.

Several programs, like Sam, use the $font variable to determine which font to use.

Acme also supports specification of the main and alternate font when running its binary from the command line via the -f (main font) and -F (alternate font) flags, illustrated in an earlier section.

Additional notes on scaling fonts and high DPI screens (examples use Acme but the behavior holds similarly for other plan9port programs where fonts may be specified using $font or otherwise):

  • If the specified font has format SCALE*FONT where SCALE is some integer, FONT is used scaled by pixel repetition. Example:

    acme -f 2*/lib/font/bit/lucsans/unicode.8.font
  • If the specified font has the format FONT1,FONT2 then FONT1 is used on low DPI screens and FONT2 is used on high DPI screens. This is useful in multi-screen environments where some screens are high DPI while other screens are low DPI. Example:

    acme -f /lib/font/bit/lucsans/unicode.8.font,/mnt/font/GoRegular/16a/font
  • If only one font is specified, on high DPI screens the font is swapped out for another (for the code, see src/libdraw/openfont.c and src/libdraw/init.c). If the font is a Plan 9 bitmap font, the same font 2-times scaled by pixel repetition is used. If the font is a fontsrv vector font, the same font with double the point size is used. E.g., the following two commands are effectively the same:

    acme -f /lib/font/bit/lucsans/euro.8.font \
         -F /mnt/font/GoMono/9/font
    acme -f /lib/font/bit/lucsans/euro.8.font,2*/lib/font/bit/lucsans/euro.8.font \
         -F /mnt/font/GoMono/9/font,/mnt/font/GoMono/18/font

    However, it can be observed that when only one font is specified with a scaling factor (acme -f 3*/lib/font/bit/luc/unicode.9.font) then no font swapping occurs on high DPI screens.

  • A screen is considered high DPI if it has DPI of around 200 or more. The code for whether a screen is considered high dpi is d->dpi >= DefaultDPI*(3/2) (in src/libdraw/openfont.c and src/libdraw/init.c) where DefaultDPI=133 (in include/draw.h).

On slower machines, using vector fonts can be slow when rendering many unicode characters outside the basic plane on screen. As a workaround, see the fontscripts folder for scripts that leverage fontsrv to convert vector fonts to Plan 9 subf format.

Keyboard bindings

Despite the mouse-centricity of the Plan 9 system (so plan9port too), it provides a few keyboard bindings applicable to most GUI programs.

  • Ctrl-a: Start of line
  • Ctrl-e: End of line
  • Ctrl-h: Delete previous character
  • Ctrl-w: Delete previous word
  • Ctrl-u: Delete backwards to start of line
  • Ctrl-f: Complete filename or pop up options in a +Error window (and warp the pointer to that window if it is newly created)
  • ESC: Selects text typed since last mouse action in Sam and Acme if nothing is selected, or deletes selected text otherwise; quick undoing of recent text input can be done with ESC-ESC

Runes can be entered using the compose key (Alt on PCs and Option on Macs) followed by a key sequence. This provides a way to type special characters on keyboards without those keys. Examples assuming compose key is Alt.

  • Alt-'-(char) for a character with acute accent, e.g. Alt-'-a for á
  • Alt-`-(char) for a character with grave accent, e.g. Alt-`-a for à
  • Alt-^-(char) for a character with circumflex, e.g. Alt-^-a for â
  • Alt-"-(char) for a character with umlaut, e.g. Alt-"-a for ä
  • Alt-,-(char) for a character with cedilla, e.g. Alt-,-c for ç
  • Alt-*-(char) for Greek letters, e.g. Alt-*-a for α
  • Alt-(num)-(num) for fractions, e.g. Alt-1-2 for ½
  • Alt-<-= and Alt->-= for ≤ and ≥
  • Alt-<-- and Alt---> for ← and →
  • Alt-u-a and Alt-d-a for ↑ and ↓
  • Alt-X-(hex)-(hex)-(hex)-(hex) for a unicode character with the given four hexadecimal digit code point, e.g. Alt-X-2-5-C-A for the LOZENGE character ◊ (hex code point 25CA); use Alt-X-X- for five hexadecimal digits and Alt-X-X-X- for six hexadecimal digits

See lib/keyboard in the plan9port source for key sequences, or the KEYBOARD(7) man page (man 7 keyboard) for more info.

Also, note that up and down in Plan 9 programs like Acme and Sam scroll the window viewport instead of moving the cursor.

macOS

Additional notes specific to macOS systems.

macOS bindings

When the touchpad is depressed, Ctrl acts as Button1, Option acts as Button2 and Command acts as Button3. Holding a modifier while depressing the touchpad does the same.

  • Ctrl-Click: Button1
  • Option-Click: Button2
  • Command-Click: Button3
  • Click-hold then Option: 1-2 chord (Acme)
  • Click-hold then Command: 1-3 chord (Acme)
  • Option-Click-hold then Ctrl: 2-1 chord (Acme)
  • Option-Click-hold then Command: Do nothing (Acme)
  • Command-Click-hold then Option: Do nothing (Acme)
  • Command-Click-hold then Ctrl: Do nothing (Acme)

On macOS, there are also additional keybindings:

  • Command-c: Copy/Snarf
  • Command-v: Paste
  • Command-x: Cut
  • Command-z: Undo (Acme)
  • Command-Shift-z: Redo (Acme)
  • Command-r: Toggle between low DPI and high DPI screen rendering

macOS dock icons

macOS Acme launcher app

Two scripts makeapp.sh and makeapp2.sh are provided in the macos folder, either of which can be used for creating an Acme launcher application bundle. See macos/README.md for details.

Note that script-only apps are always run under Rosetta 2 on arm macOS systems, so make sure to install that if needed (for more information on this topic, see the paragraph on unsigned native (ARM) code here) and also see here.

macOS tips

  • See here for an example of how to set up acme-lsp for Acme on macOS. One nice config part is using the hotkey daemon skhd to create Acme-specific keyboard shortcuts to run acme-lsp commands.

  • Any required font scaling is detected from window properties (specifically from the value of backingScaleFactor) so high-density (e.g. Retina) screens are handled automatically in macOS. Bitmap fonts are scaled by pixel-doubling so they can get jaggy. Therefore, it can be better to use vector fonts presented using fontsrv as those are instead scaled by doubling font size.

Unix

Additional notes specific to Unix systems.

Unix bindings

When the touchpad is depressed, Ctrl acts as Button2, Alt acts as Button3 and Command acts as Button3. Holding a modifier while depressing the touchpad does the same. Note that 2-1 chords are not possible in Unix system without a mouse.

  • Ctrl-Click: Button2
  • Alt-Click: Button3
  • Click-hold then Ctrl: 1-2 chord (Acme)
  • Click-hold then Alt: 1-3 chord (Acme)
  • Ctrl-Click-hold then Alt: Do nothing (Acme)
  • Alt-Click-hold then Ctrl: Do nothing (Acme)

Unix desktop icons

Acme freedesktop.org desktop entry specification

Assume that stow was used above to symlink scripts and config files. Instructions here use the ~/.acme/bin/startacme.sh launcher script.

To create a menu item for Acme, create a scaled down version of mac/spaceglenda.png in the plan9port repository (at resolution 240x240), save it to ~/.local/share/icons/spaceglenda240.png and create the freedesktop.org desktop entry specification file at ~/.local/share/applications/acme.desktop with the following contents (replace USERNAME as appropriate).

[Desktop Entry]
Name=Acme
Comment=A text editor that is the successor of sam
GenericName=Text Editor
Exec=/home/USERNAME/.local/bin/startacme.sh %f
TryExec=/home/USERNAME/.local/bin/startacme.sh
Icon=/home/USERNAME/.local/share/icons/spaceglenda240.png
Categories=Utility;Development;TextEditor;
Terminal=false
Type=Application
Version=1.0

Other files in this repository

  • sam-examples.txt: Examples of Sam commands, most of which can also be used in Acme with the Edit command.

  • unicode-chars.txt: Useful Unicode characters.

Ports of Plan 9 tools to other languages

Other Plan 9-related tools

  • ghfs: 9p Github file server. To use it after installing, run ghfs, mount the filesystem with 9 mount localhost:5640 /path/to/mountpoint (replace port number with set ghfs port, and modify the the mountpoint path as needed).

Other useful or reference links

About

Plan 9 from User Space (plan9port) configuration

Topics

Resources

Stars

Watchers

Forks

Languages