Skip to content

Commit

Permalink
Add support for no neutral setups.
Browse files Browse the repository at this point in the history
  • Loading branch information
@jamesturton
jamesturton committed Apr 28, 2021
1 parent f1c1e7c commit 36977bd
Showing 1 changed file with 74 additions and 43 deletions.
117 changes: 74 additions & 43 deletions src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -125,6 +125,7 @@ static uint32_t current_total_mag = 0;
static uint16_t voltage_max = 0;
static uint16_t voltage_max_period = 0;
static uint32_t voltage_total = 0;
static uint16_t max_brightness = 500;

static void ring_init(struct ring *ring, uint8_t *buf, ring_size_t size)
{
Expand Down Expand Up @@ -543,8 +544,9 @@ static void gpio_setup(void)
// Start in voltage measuring mode
gpio_set(GPIOB, GPIO8);

// Setup GPIO pins for mains detect pin
// Setup GPIO pins for mains detect pins
gpio_mode_setup(GPIOB, GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN, GPIO2);
gpio_mode_setup(GPIOB, GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN, GPIO7);

// Setup analog GPIO pins
gpio_mode_setup(GPIOA, GPIO_MODE_ANALOG, GPIO_PUPD_NONE, GPIO3); // ADC_IN3
Expand Down Expand Up @@ -678,15 +680,20 @@ static void timer3_setup(void)

static void exti_setup(void)
{
// Enable external interrupt 2
// Enable external interrupts 2 and 7
nvic_enable_irq(NVIC_EXTI2_3_IRQ);
nvic_enable_irq(NVIC_EXTI4_15_IRQ);

// Configure the EXTI subsystem
exti_select_source(EXTI2, GPIOB);
exti_select_source(EXTI7, GPIOB);

exti_set_trigger(EXTI2, EXTI_TRIGGER_BOTH);
exti_set_trigger(EXTI7, EXTI_TRIGGER_BOTH);

// Finally enable EXTI2
// Finally enable EXTI2 and EXTI7
exti_enable_request(EXTI2);
exti_enable_request(EXTI7);
}

static void adc_setup(void)
Expand Down Expand Up @@ -762,6 +769,54 @@ static void mosfet_off(void) {
}
}

static void on_trigger(uint32_t gpio_bank, uint32_t gpio_pin)
{
// Have we triggered too early? If so return straight away
if (timer_get_counter(TIM1) < 750)
return;

if (gpio_get(gpio_bank, gpio_pin))
line_freq_counter = timer_get_counter(TIM1);
else
{
line_freq_counter = (line_freq_counter + timer_get_counter(TIM1)) / 2;
line_freq = line_freq - line_freq / 64 + line_freq_counter;
}

// Change ouput polarity if needed depending on leading edge mode
brightness = brightness_req * max_brightness / 1000;
brightness = leading_edge ? 1000 - brightness : brightness;

// Adjust the brigtness value according to the mains frequency
brightness_adj = brightness * line_freq / 64000;
if (brightness_adj < low_brightness_threshold)
{
timer_set_oc_value(TIM1, TIM_OC1, low_brightness_threshold);
timer_set_oc_value(TIM1, TIM_OC2, low_brightness_threshold - brightness_adj);
}
else if (brightness_adj > 0)
{
timer_set_oc_value(TIM1, TIM_OC1, brightness_adj);
timer_set_oc_value(TIM1, TIM_OC2, 0);
mosfet_on();
}
timer_set_counter(TIM1, 0);

// Do the rest after setting up the timer, as this may cause jitter

// Update only once per full line cycle
if (gpio_get(gpio_bank, gpio_pin))
{
current_max_period = current_total / adc_count;
current_total = 0;
current_total_mag_period = current_total_mag / adc_count;
current_total_mag = 0;
voltage_max_period = voltage_total / adc_count;
voltage_total = 0;
adc_count = 0;
}
}

int main(void)
{
// Setup all subsystems
Expand Down Expand Up @@ -823,7 +878,6 @@ void tim1_cc_isr(void)
return;
mosfet_on();
}

}

void tim2_isr(void)
Expand All @@ -836,6 +890,7 @@ void tim2_isr(void)
timer_clear_flag(TIM2, TIM_SR_CC1IF);

hw_version = dimmer1;
max_brightness = 1000;

// Calculate period of CF1 signal
tim_ccr1_now = TIM_CCR1(TIM2);
Expand Down Expand Up @@ -916,50 +971,26 @@ void tim3_isr(void)

void exti2_3_isr(void)
{
if (!exti_get_flag_status(EXTI2))
return;

// Reset interupt request
exti_reset_request(EXTI2);

// Have we triggered too early? If so return straight away
if (timer_get_counter(TIM1) < 750)
return;

if (gpio_get(GPIOB, GPIO2))
line_freq_counter = timer_get_counter(TIM1);
else
{
line_freq_counter = (line_freq_counter + timer_get_counter(TIM1)) / 2;
line_freq = line_freq - line_freq / 64 + line_freq_counter;
}
on_trigger(GPIOB, GPIO2);
}

// Change ouput polarity if needed depending on leading edge mode
brightness = leading_edge ? 1000 - brightness_req : brightness_req;
void exti4_15_isr(void)
{
if (!exti_get_flag_status(EXTI7))
return;

// Adjust the brigtness value according to the mains frequency
brightness_adj = brightness * line_freq / 64000;
if (brightness_adj < low_brightness_threshold)
{
timer_set_oc_value(TIM1, TIM_OC1, low_brightness_threshold);
timer_set_oc_value(TIM1, TIM_OC2, low_brightness_threshold - brightness_adj);
}
else if (brightness_adj > 0)
{
timer_set_oc_value(TIM1, TIM_OC1, brightness_adj);
timer_set_oc_value(TIM1, TIM_OC2, 0);
mosfet_on();
}
timer_set_counter(TIM1, 0);
// Reset interupt request
exti_reset_request(EXTI7);

// Do the rest after setting up the timer, as this may cause jitter
// We must be on dimmer2
// Ignore EXTI2 interupts so we don't trigger twice
exti_disable_request(EXTI2);

// Update only once per full line cycle
if (gpio_get(GPIOB, GPIO2))
{
current_max_period = current_total / adc_count;
current_total = 0;
current_total_mag_period = current_total_mag / adc_count;
current_total_mag = 0;
voltage_max_period = voltage_total / adc_count;
voltage_total = 0;
adc_count = 0;
}
on_trigger(GPIOB, GPIO7);
}

0 comments on commit 36977bd

Please sign in to comment.