init

.gitignore

@@ -0,0 +1 @@
+*~

LICENSE

@@ -0,0 +1,27 @@
+Copyright (c) 2013, Henry Lee([email protected]).
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of Henry Lee nor the names of its contributors may be
+      used to endorse or promote products derived from this software without
+      specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

README.md

@@ -0,0 +1,18 @@
+linux.config
+============================
+
+### Author
+
+    [email protected]
+
+### kernel.config supported Machine
+
+     ThinkPad E530c
+     msi ZH77A-G43 + core-i3
+     [Alienware Alpha](http://www.dell.com/Support/Article/cn/zh/cndhs1/SLN300246)
+     
+### License
+
+This work is licensed under the New BSD License (see the LICENSE file).
+
+[alpha]: http://www.dell.com/Support/Article/cn/zh/cndhs1/SLN300246 "specifications"

etc/dracut.conf.d/default.conf

@@ -0,0 +1,7 @@
+# Equivalent to -H
+hostonly="yes"
+force="yes"
+compress="xz"
+# Equivalent to -o "module"
+omit_dracutmodules+="bootchart dash modsign busybox network lvmmerge btrfs dm dmraid dmsquash-live-ntfs lvm mdraid crypt-gpg cifs iscsi iscsi biosdevname masterkey"
+no_kernel="yes"

etc/kernel/install.d/99-config.install

@@ -0,0 +1,42 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="$3"
+KERNEL_IMAGE="$4"
+
+if ! [[ $KERNEL_INSTALL_MACHINE_ID ]]; then
+    exit 0
+fi
+
+if ! [[ -d "$BOOT_DIR_ABS" ]]; then
+    exit 0
+fi
+
+MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID
+
+BOOT_DIR="/$MACHINE_ID/$KERNEL_VERSION"
+BOOT_ROOT=${BOOT_DIR_ABS%$BOOT_DIR}
+CONF="$BOOT_ROOT/$KERNEL_VERSION.conf"
+
+if [[ $COMMAND == remove ]]; then
+    exec rm -f "$CONF"
+fi
+
+if ! [[ $COMMAND == add ]]; then
+    exit 1
+fi
+
+if ! [[ $KERNEL_IMAGE ]]; then
+    exit 1
+fi
+
+
+if [[ -f .config ]]; then
+    echo "cp .config $CONF"
+    cp .config $CONF
+fi
+
+exit 0

etc/paludis/bashrc

@@ -0,0 +1,6 @@
+CHOST="x86_64-pc-linux-gnu"
+i686_pc_linux_gnu_CFLAGS="-march=native -O2 -pipe -fPIC"
+i686_pc_linux_gnu_CXXFLAGS="-march=native -O2 -pipe -fPIC"
+x86_64_pc_linux_gnu_CFLAGS="-march=native -O2 -pipe -fPIC"
+x86_64_pc_linux_gnu_CXXFLAGS="-march=native -O2 -pipe -fPIC"
+

etc/paludis/general.conf

@@ -0,0 +1 @@
+world = ${root}/var/db/paludis/repositories/installed/world

etc/paludis/licences.conf

@@ -0,0 +1 @@
+*/* *

etc/paludis/mirrors.conf.d/gentoo.conf

@@ -0,0 +1 @@
+* http://mirrors.163.com/gentoo/distfiles/

etc/paludis/options.conf.d/all.conf

@@ -0,0 +1,8 @@
+*/* build_options: jobs=4 symbols=strip -recommended_tests -optional_tests 
+*/* parts: -documentation
+*/* targets: x86_64-pc-linux-gnu
+# i686-pc-linux-gnu
+*/* linguas: zh_CN zh_TW ja
+*/* amd64_cpu_features: mmx mmxext sse sse2 sse3 ssse3 sse4 sse4.1 sse4.2 avx avx2 fma3 aes
+*/* -doc -vim-syntax -perl -python -ruby -bash-completion -X
+

etc/paludis/options.conf.d/audio.conf

@@ -0,0 +1 @@
+media-sound/pulseaudio -tcpd bluetooth

etc/paludis/options.conf.d/chrome.conf

@@ -0,0 +1 @@
+net-print/cups -pam -systemd -tcpd

etc/paludis/options.conf.d/coreutils.conf

@@ -0,0 +1 @@
+sys-apps/coreutils xattr

etc/paludis/options.conf.d/ffmpeg.conf

@@ -0,0 +1 @@
+media/ffmpeg -truetype -pulseaudio providers: -openh264

etc/paludis/options.conf.d/gtk.conf

@@ -0,0 +1 @@
+x11-libs/gtk+ wayland

etc/paludis/options.conf.d/libxslt.conf

@@ -0,0 +1 @@
+dev-libs/libxslt -crypt

etc/paludis/options.conf.d/mesa.conf

@@ -0,0 +1,2 @@
+x11-dri/libdrm video_drivers: nouveau
+x11-dri/mesa wayland video_drivers: nouveau

etc/paludis/options.conf.d/mpv.conf

@@ -0,0 +1,2 @@
+media-libs/libass fontconfig
+

etc/paludis/options.conf.d/paludis.conf

@@ -0,0 +1,2 @@
+sys-apps/paludis -vim-syntax -bash-completion zsh-completion -pbin
+

etc/paludis/options.conf.d/systemd.conf

@@ -0,0 +1,2 @@
+sys-apps/systemd acl zsh-completion efi
+

etc/paludis/options.conf.d/tar.conf

@@ -0,0 +1,2 @@
+app-arch/tar acl
+

etc/paludis/options.conf.d/vlc.conf

@@ -0,0 +1 @@
+media/vlc -crypt -truetype

etc/paludis/options.conf.d/weston.conf

@@ -0,0 +1,5 @@
+compositor/weston -X
+x11-libs/cairo glesv2
+x11-dri/libdrm video_drivers: nouveau
+x11-dri/mesa wayland video_drivers: nouveau
+x11-libs/libxkbcommon wayland

etc/paludis/options.conf.d/wpa.conf

@@ -0,0 +1 @@
+net-wireless/wpa_supplicant -dbus nl80211

etc/paludis/options.conf.d/zsh.conf

@@ -0,0 +1 @@
+app-shells/zsh caps

etc/paludis/platforms.conf

@@ -0,0 +1 @@
+*/* amd64 ~amd64

etc/paludis/recommendations.conf.d/glib.conf

@@ -0,0 +1,2 @@
+dev-libs/glib -gnome-desktop/dconf
+

etc/paludis/repositories/accounts.conf

@@ -0,0 +1 @@
+format = accounts

etc/paludis/repositories/arbor.conf

@@ -0,0 +1,6 @@
+location = ${root}/var/db/paludis/repositories/arbor
+sync = git+https://git.exherbo.org/git/arbor.git
+profiles = ${location}/profiles/amd64
+format = e
+names_cache = ${root}/var/cache/paludis/names
+write_cache = ${root}/var/cache/paludis/metadata

etc/paludis/repositories/desktop.conf

@@ -0,0 +1,3 @@
+format = e
+location = /var/db/paludis/repositories/desktop
+sync = git+https://git.exherbo.org/git/desktop.git

etc/paludis/repositories/graveyard.conf

@@ -0,0 +1,4 @@
+format = unwritten
+location = /var/db/paludis/repositories/graveyard
+sync = git+https://git.exherbo.org/git/graveyard.git
+importance = -90

etc/paludis/repositories/i686-pc-linux-gnu.conf

@@ -0,0 +1,6 @@
+format = exndbam
+location = ${root}/var/db/paludis/repositories/cross-installed/i686-pc-linux-gnu
+name = i686-pc-linux-gnu
+split_debug_location = /usr/i686-pc-linux-gnu/lib/debug
+tool_prefix = i686-pc-linux-gnu-
+cross_compile_host = i686-pc-linux-gnu

etc/paludis/repositories/installed.conf

@@ -0,0 +1,5 @@
+location = ${root}/var/db/paludis/repositories/installed
+format = exndbam
+names_cache = ${root}/var/cache/paludis/names
+split_debug_location = /usr/x86_64-pc-linux-gnu/lib/debug
+tool_prefix = x86_64-pc-linux-gnu-

etc/paludis/repositories/installed_accounts.conf

@@ -0,0 +1,2 @@
+format = installed-accounts
+handler = passwd

etc/paludis/repositories/python.conf

@@ -0,0 +1,3 @@
+format = e
+location = /var/db/paludis/repositories/python
+sync = git+https://git.exherbo.org/git/python.git

etc/paludis/repositories/repository.conf

@@ -0,0 +1,3 @@
+format = repository
+config_filename = /etc/paludis/repositories/%{repository_template_name}.conf
+config_template = /etc/paludis/repository.template

etc/paludis/repositories/sigma0f.conf

@@ -0,0 +1,4 @@
+location = ${root}/usr/local/sigma0f
+sync = git+https://github.com/sigma0f/sigma0f
+format = e
+

etc/paludis/repositories/unavailable-unofficial.conf

@@ -0,0 +1,5 @@
+format = unavailable
+name = unavailable-unofficial
+sync = tar+https://git.exherbo.org/exherbo_unofficial_repositories.tar.bz2
+location = ${root}/var/db/paludis/repositories/unavailable-unofficial
+importance = -100

etc/paludis/repositories/unavailable.conf

@@ -0,0 +1,5 @@
+format = unavailable
+name = unavailable
+sync = tar+https://git.exherbo.org/exherbo_repositories.tar.bz2
+location = ${root}/var/db/paludis/repositories/unavailable
+importance = -100

etc/paludis/repositories/unpackaged.conf

@@ -0,0 +1,2 @@
+location = ${root}/var/db/paludis/repositories/unpackaged
+format = installed_unpackaged

etc/paludis/repositories/unwritten.conf

@@ -0,0 +1,4 @@
+format = unwritten
+location = ${root}/var/db/paludis/repositories/unwritten
+sync = git+https://git.exherbo.org/git/unwritten.git
+importance = -100

etc/paludis/repositories/x11.conf

@@ -0,0 +1,3 @@
+format = e
+location = /var/db/paludis/repositories/x11
+sync = git+https://git.exherbo.org/git/x11.git

etc/paludis/repository.template

@@ -0,0 +1,3 @@
+format = %{repository_template_format}
+location = /var/db/paludis/repositories/%{repository_template_name}
+sync = %{repository_template_sync}

etc/paludis/suggestions.conf.d/dconf.conf

@@ -0,0 +1 @@
+gnome-desktop/dconf -gnome-desktop/dconf-editor

etc/paludis/suggestions.conf.d/dracut.conf

@@ -0,0 +1 @@
+sys-boot/dracut -net-fs/cifs-utils -net-misc/open-iscsi -sys-boot/plymouth -net-misc/bridge-utils

etc/paludis/suggestions.conf.d/git.conf

@@ -0,0 +1 @@
+dev-scm/git -dev-scm/cvsps -dev-perl/DBI -dev-perl/CGI -dev-perl/MailTools -dev-perl/libwww-perl -net-misc/rsync

etc/paludis/suggestions.conf.d/glib.conf

@@ -0,0 +1 @@
+dev-libs/glib -gnome-desktop/gvfs

etc/paludis/suggestions.conf.d/groff.conf

@@ -0,0 +1 @@
+sys-apps/groff -dev-perl/File-HomeDir -media-sound/lilypond

etc/paludis/suggestions.conf.d/systemd.conf

@@ -0,0 +1 @@
+sys-apps/systemd -dev-python/lxml

etc/portage/env/chromium.conf

@@ -0,0 +1,3 @@
+EXTRA_ECONF=" use_kerberos=false use_gio=false use_glib=false enable_media_remoting=false enable_webrtc=false"
+
+

etc/portage/env/clang

@@ -0,0 +1,10 @@
+#--*--coding:utf-8-unix;--*--
+CC="clang"
+CXX="clang++"
+CFLAGS="-O2 -pipe -fPIC"
+CXXFLAGS="${CFLAGS}"
+LDFLAGS="-Wl,-O2 -Wl,--as-needed -fuse-ld=lld"
+AR="llvm-ar"
+NM="llvm-nm"
+RANLIB="llvm-ranlib"
+AS="llvm-as"

etc/portage/env/clang.local

@@ -0,0 +1,14 @@
+#--*--coding:utf-8-unix;--*--
+LLVM_ROOT=/usr/local/llvm
+LLVM_BIN=${LLVM_ROOT}/bin
+LLVM_LIB=${LLVM_ROOT}/lib
+export LD_LIBRARY_PATH=${LLVM_LIB}
+CC="${LLVM_BIN}/clang"
+CXX="${LLVM_BIN}/clang++"
+CFLAGS="-O2 -pipe -fPIC"
+CXXFLAGS="${CFLAGS} -fno-rtti -stdlib=libc++"
+LDFLAGS="-Wl,-O2 -Wl,--as-needed -lunwind -lpthread -ldl"
+AR="${LLVM_BIN}/llvm-ar"
+NM="${LLVM_BIN}/llvm-nm"
+RANLIB="${LLVM_BIN}/llvm-ranlib"
+AS="${LLVM_BIN}/llvm-as"

etc/portage/env/gcc

@@ -0,0 +1,3 @@
+CFLAGS="-O2 -pipe"              
+CXXFLAGS="${CFLAGS}"
+LDFLAGS="-Wl,-O2 -Wl,--as-needed -fuse-ld=gold"

etc/portage/env/gold.conf

@@ -0,0 +1,2 @@
+EXTRA_ECONF="--enable-gold=default --disable-obsolete --enable-lto --enable-plugins"
+

etc/portage/env/static

@@ -0,0 +1,3 @@
+CFLAGS="-O2 -pipe -static"              
+CXXFLAGS="${CFLAGS}"
+LDFLAGS="-Wl,-O2 -Wl,--as-needed -fuse-ld=gold"

etc/portage/flatpak.conf

@@ -0,0 +1,6 @@
+[flatpak-overlay]
+priority = 50 
+location = /usr/local/overlay/flatpak
+sync-type = git 
+sync-uri = https://github.com/fosero/flatpak-overlay
+auto-sync = Yes

etc/portage/make.conf

@@ -0,0 +1,52 @@
+# These settings were set by the catalyst build script that automatically
+# built this stage.
+# Please consult /usr/share/portage/config/make.conf.example for a more
+# detailed example.
+ACCEPT_KEYWORDS="~amd64"
+# for c/c++
+CFLAGS="-pipe -O2 -march=native -fPIC"
+CXXFLAGS="${CFLAGS}"
+LDFLAGS="-Wl,-O2 -Wl,--as-needed"
+# for dlang
+DMDFLAGS="-O"
+#EMERGE_DEFAULT_OPTS="--quiet-build"
+# WARNING: Changing your CHOST is not something that should be done lightly.
+# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
+CHOST="x86_64-pc-linux-gnu"
+# These are the USE flags that were used in addition to what is provided by the
+# profile used for building.
+CPU_FLAGS="mmx mmxext sse sse2 sse3 ssse3 sse4 sse4_1 sse4_2 avx avx2 fma3 aes"
+UNUSE="-gstreamer -vala -X -gtk -iptables -python -perl -ruby -lua -multilib \
+-smartcard -introspection -xml -openmp -fortran -handbook -man -doc -gnome \
+-tcpd -qt -qt3 -qt4 -qt5 -gnome-online-accounts -postscript -consolekit \
+-sendmail -cups -colord -ldap -cxx -gdbm -berkdb -ipv6 -bzip2"
+USE="$UNUSE minimal wayland systemd pulseaudio bluetooth threads"
+#PORTDIR="/usr/portage"
+#DISTDIR="${PORTDIR}/distfiles"
+#PKGDIR="${PORTDIR}/packages"
+PORTAGE_TMPDIR="/tmp"
+# add by lee
+MAKEOPTS="-j4"
+GENTOO_MIRRORS="http://mirrors.163.com/gentoo http://gentoo.osuosl.org"
+LINGUAS="en_US zh_CN"
+L10N="zh-CN"
+VIDEO_CARDS="nouveau"
+INPUT_DEVICES="evdev"
+#PYTHON_SINGLE_TARGET=""
+#PYTHON_TARGETS=""
+#nouveau
+#ENLIGHTENMENT_MODULES=""
+ENLIGHTENMENT_MODULES="appmenu clock conf conf-applications conf-bindings conf-comp conf-dialogs conf-display conf-interaction conf-intl conf-menus conf-paths conf-performance conf-randr conf-shelves conf-theme conf-window-remembers cpufreq everything fileman fileman-opinfo gadman ibar ibox lokker illume2 mixer msgbus music-control notification pager pager-plain quickaccess shot start syscon systray tasks tiling winlist wireless wizard xkbswitch wl-desktop-shell wl-drm wl-text-input wl-weekeyboard xwayland time packagekit temperature connman bluze4"
+CPU_FLAGS_X86="mmx mmxext sse sse2 sse3 ssse3 sse4 sse4_1 sse4_2 avx avx2 fma3 aes"
+LLVM_TARGETS="X86"
+FFTOOLS=""
+ALSA_CARDS=""
+APACHE2_MODULES=""
+CALLIGRA_FEATURES=""
+COLLECTD_PLUGINS=""
+GPSD_PROTOCOLS=""
+LCD_DEVICES=""
+XTABLES_ADDONS=""
+#
+QEMU_SOFTMMU_TARGETS="x86_64"
+QEMU_USER_TARGETS=""

etc/portage/make.conf.catalyst

@@ -0,0 +1,15 @@
+# These settings were set by the catalyst build script that automatically
+# built this stage.
+# Please consult /usr/share/portage/config/make.conf.example for a more
+# detailed example.
+CFLAGS="-O2 -pipe"
+CXXFLAGS="${CFLAGS}"
+# WARNING: Changing your CHOST is not something that should be done lightly.
+# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
+CHOST="x86_64-pc-linux-gnu"
+# These are the USE flags that were used in addition to what is provided by the
+# profile used for building.
+USE="bindist mmx sse sse2"
+PORTDIR="/usr/portage"
+DISTDIR="${PORTDIR}/distfiles"
+PKGDIR="${PORTDIR}/packages"

etc/portage/make.profile

@@ -0,0 +1 @@
+../../usr/portage/profiles/default/linux/amd64/17.0/no-multilib

etc/portage/package.accept_keywords/chromium

@@ -0,0 +1 @@
+www-client/chromium -~amd64

etc/portage/package.accept_keywords/gcc

@@ -0,0 +1,2 @@
+# package.accept_keywords# required by =gcc-6.3.0 (argument)
+<=sys-devel/gcc-7.9.9 **

etc/portage/package.accept_keywords/weston

@@ -0,0 +1 @@
+=compositor/weston-9999 **

etc/portage/package.env/bcc

@@ -0,0 +1 @@
+dev-util/bcc clang

etc/portage/package.env/binutils

@@ -0,0 +1,2 @@
+sys-devel/binutils gold.conf
+

etc/portage/package.env/chromium

@@ -0,0 +1,2 @@
+www-client/chromium clang chromium.conf
+