Skip to content

Thunder Setup Scripts

Hadcl4 edited this page May 10, 2022 · 4 revisions

Thunder Setup Script List

This page will list games included in Thunder's setup scripts.

Cave Story+

Tested On: Raspberry Pi 4B 8GB
Overclocked?: Yes, 1.8Ghz CPU and 550Mhz GPU
Performance: 60FPS almost always
Setup Needed: Currently, No
Platform(s): Steam (Box86)
Additional Notes: None

Shovel Knight Games

Tested On: Raspberry Pi 4B 8GB, RockPi 4B+ 4GB
Overclocked?: Yes, 1.8Ghz CPU and 550Mhz GPU, no for the RockPi
Performance: Laggy without Configuration on Raspberry Pi 4, full speed out of the box on RockPi 4B+
Setup Needed: For full speed, yes on Raspberry Pi 4, no on RockPi
Platform(s): Steam (Box86 or Box64), GOG (Box86 or Box64)
Additional Notes: Currently there are only setup scripts for 2 Shovel Knight games: Shovel of Hope and Showdown

Sega Genesis+Mega Drive Classics

Tested On: Raspberry Pi 4B 8GB
Overclocked?: Yes, 1.8Ghz CPU and 550Mhz GPU
Performance: Game itself doesn't work
Setup Needed: Yes, unless you want to grab the ROMs yourself
Platform(s): Steam (Box64), Mednafen
Additional Notes: The game itself doesn't work, however you can easily grab the ROMs to play in Mednafen

Godot Game Engine

Tested On: Raspberry Pi 4B 8GB
Overclocked?: Yes, 1.8Ghz CPU and 550Mhz GPU
Performance: OpenGL 2.1 works, not 3.x though
Setup Needed: No
Platform(s): Steam (Box86 or Box64), native ARM Linux, x86/64 Linux
Additional Notes: You must use OpenGL 2.1 for Godot to work.

Teeworlds

Tested On: Raspberry Pi 4B 8GB, Raspberry Pi 3
Overclocked?: Yes for the Pi4, 1.8Ghz CPU and 550Mhz GPU, no for the Pi3
Performance: Lots of frame skipping on Pi4, but very playable, unplayable on Pi3
Setup Needed: No
Platform(s): Steam (Box86), native ARM Linux, x86/64 Linux
Additional Notes: Game is available both through apt and Steam

Flatpak

Tested On: RockPi 4B+ 4GB
Overclocked?: No
Performance: Just a CLI tool, so runs perfectly
Setup Needed: Technically no, as it can easily be installed manually as well
Platform(s): Native ARM Linux
Additional Notes: None

Play!

Tested On: Raspberry Pi 4B 8GB
Overclocked?: Yes, 1.8Ghz CPU and 550Mhz GPU
Performance: Only tried one game in it so far, 1 to 30-ish FPS
Setup Needed: No
Platform(s): Native ARM Linux
Additional Notes: Play! is an open-source PlayStation 2 emulator
Clone this wiki locally