Feature/ha discovery

firmware/esp32/gdoor/main.cpp

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  
@@ -20,6 +20,8 @@
 #include "src/wifi_helper.h"
 #include "src/printer_helper.h"
 
+GDOOR_DATA_PROTOCOL gdoor_data_idle(NULL, true);
+
 boolean debug = false; // Global variable to indicate if we are in debug mode (true)
 const char* mqtt_topic_bus_rx = NULL;
 
@@ -48,8 +50,8 @@ boolean parse(String  &input) {
  * outputs valid bus messages.
  * @param busmessage The bus message to be send out to the user.
 */
-void output(GDOOR_DATA_PROTOCOL &busmessage, const char* topic) {
-    if(debug || busmessage.raw->valid) {
+void output(GDOOR_DATA_PROTOCOL &busmessage, const char* topic, bool force=false) {
+    if(force || debug || (busmessage.raw != NULL && busmessage.raw->valid)) {
         MQTT_HELPER::printer.print("{");
         MQTT_HELPER::printer.print(busmessage);
         MQTT_HELPER::printer.println("}");
@@ -60,19 +62,23 @@ void output(GDOOR_DATA_PROTOCOL &busmessage, const char* topic) {
 void setup() {
     Serial.begin(115200);
     Serial.setTimeout(1);
-    JSONDEBUG("GDOOR Setup start");
+    JSONDEBUG("GDoor Setup start");
 
     WIFI_HELPER::setup();
+    MQTT_HELPER::setup(WIFI_HELPER::mqtt_server(),
+                       WIFI_HELPER::mqtt_port(),
+                       WIFI_HELPER::mqtt_user(),
+                       WIFI_HELPER::mqtt_password(),
+                       WIFI_HELPER::mqtt_topic_bus_tx(),
+                       WIFI_HELPER::mqtt_topic_bus_rx());
 
     GDOOR::setRxThreshold(PIN_RX_THRESH, WIFI_HELPER::rx_sensitivity());
     GDOOR::setup(PIN_TX, PIN_TX_EN, WIFI_HELPER::rx_pin());
 
-    MQTT_HELPER::setup(WIFI_HELPER::mqtt_server(), WIFI_HELPER::mqtt_port(), WIFI_HELPER::mqtt_user(), WIFI_HELPER::mqtt_password(), WIFI_HELPER::mqtt_topic_bus_tx());
-
     mqtt_topic_bus_rx = WIFI_HELPER::mqtt_topic_bus_rx();
     debug = WIFI_HELPER::debug();
 
-    JSONDEBUG("GDOOR Setup done");
+    JSONDEBUG("GDoor Setup done");
     JSONDEBUG("RX Pin: ");
     JSONDEBUG(WIFI_HELPER::rx_pin());
     JSONDEBUG("RX Sensitivity: ");
@@ -84,19 +90,28 @@ void loop() {
     MQTT_HELPER::loop();
     GDOOR::loop();
     GDOOR_DATA* rx_data = GDOOR::read();
+
+    // Output bus idle message on new MQTT connections to set a defined state
+    if(MQTT_HELPER::isNewConnection()) {
+        output(gdoor_data_idle, mqtt_topic_bus_rx, true);
+    }
     if(rx_data != NULL) {
         JSONDEBUG("Received data from bus");
         GDOOR_DATA_PROTOCOL busmessage = GDOOR_DATA_PROTOCOL(rx_data);
         output(busmessage, mqtt_topic_bus_rx);
-        JSONDEBUG("Output bus data via Serial and MQTT, done");        
+        JSONDEBUG("Output bus data via Serial and MQTT, done");
+        // Output idle message after bus message, to reset values so that
+        //home automation can trigger again
+        output(gdoor_data_idle, mqtt_topic_bus_rx, true);
+
     } else if (!GDOOR::active()) { // Neither RX nor TX active,
         String str_received("");
         if (Serial.available() > 0) { // let's check the serial port if something is in buffer
             str_received = Serial.readString();
-            str_received.trim();    
         } else {
             str_received = MQTT_HELPER::receive();
         }
+        str_received.trim();    
 
         if(str_received.length() > 0) {
             if(!parse(str_received)) { //Check if received string is a command

firmware/esp32/gdoor/manifest.json

@@ -0,0 +1,15 @@
+{
+    "name": "GDoor",
+    "version": "dev",
+    "builds": [
+        {
+            "chipFamily": "ESP32",
+            "parts": [
+                {
+                    "path": "firmware_merged.bin",
+                    "offset": 0
+                }
+            ]
+        }
+    ]
+}

firmware/esp32/gdoor/merge_firmware.py

@@ -30,4 +30,4 @@ def merge_bin(source, target, env):
     )
 
 # Add a post action that runs esptoolpy to merge available flash images
-env.AddPostAction(APP_BIN , merge_bin)
+env.AddPostAction(APP_BIN, merge_bin)

firmware/esp32/gdoor/src/defines.h

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  
@@ -17,7 +17,8 @@
 #ifndef DEFINES_H
 #define DEFINES_H
 
-// GDOOR
+// GDoor
+#define GDOOR_VERSION "dev"
 #define MAX_WORDLEN 25
 
 // RX Statemachine
@@ -40,7 +41,7 @@
 #define STATE_SENDING 0x01
 
 // WIFI
-#define DEFAULT_WIFI_SSID     "GDOOR"
+#define DEFAULT_WIFI_SSID     "GDoor"
 #define DEFAULT_WIFI_PASSWORD "12345678"
 
 // MQTT

firmware/esp32/gdoor/src/gdoor.cpp

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  
@@ -18,7 +18,7 @@
 
 namespace GDOOR {
     /*
-    * Setup everything needed for GDOOR.
+    * Setup everything needed for GDoor.
     * @param int txpin Pin number where PWM is created when sending out data
     * @param int txenpin Pin number where output buffer is turned on/off
     * @param int rxpin Pin number where pulses from bus are received

firmware/esp32/gdoor/src/gdoor.h

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  

firmware/esp32/gdoor/src/gdoor_data.cpp

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  
@@ -131,11 +131,16 @@ bool GDOOR_DATA::parse(uint16_t *counts, uint16_t len) {
 * and stores a human readable form in its class elements.
 *
 * @param data GDOOR_DATA element, with parsed bus data.
+* @param idle true: generate idle message
 */
-GDOOR_DATA_PROTOCOL::GDOOR_DATA_PROTOCOL(GDOOR_DATA* data) {
-    this->type = "TYPE_UNKOWN";
-    this->action = "ACTION_UNKOWN";
-
+GDOOR_DATA_PROTOCOL::GDOOR_DATA_PROTOCOL(GDOOR_DATA* data, bool idle) {
+    if(idle) {
+        this->type = "TYPE_GDOOR";
+        this->action = "BUS_IDLE";
+    } else {
+        this->type = "TYPE_UNKOWN";
+        this->action = "ACTION_UNKOWN";
+    }
     this->raw = data;
 
     this->source[0] = 0x00;
@@ -149,7 +154,7 @@ GDOOR_DATA_PROTOCOL::GDOOR_DATA_PROTOCOL(GDOOR_DATA* data) {
     this->parameters[0] = 0x00;
     this->parameters[1] = 0x00;
 
-    if(data->valid && data->len >= 9) {
+    if(data != NULL && data->valid && data->len >= 9) {
         if(GDOOR_DATA_HWTYPE.find(data->data[8]) != GDOOR_DATA_HWTYPE.end()){
             this->type = GDOOR_DATA_HWTYPE.at(data->data[8]);
         }

firmware/esp32/gdoor/src/gdoor_data.h

@@ -1,7 +1,7 @@
 
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  
@@ -59,7 +59,7 @@ class GDOOR_DATA_PROTOCOL : public Printable { // Class/Struct to collect bus hi
         uint8_t source[3];
         uint8_t destination[3];
 
-        GDOOR_DATA_PROTOCOL(GDOOR_DATA* data);
+        GDOOR_DATA_PROTOCOL(GDOOR_DATA* data, bool idle = false);
 
         virtual size_t printTo(Print& p) const {
             size_t r = 0;

firmware/esp32/gdoor/src/gdoor_rx.cpp

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  
@@ -103,7 +103,7 @@ namespace GDOOR_RX {
 
 
     /*
-    * Function called by user to setup everything needed for GDOOR.
+    * Function called by user to setup everything needed for GDoor.
     * @param int rxpin Pin number where pulses from bus are received
     */
     void setup(uint8_t rxpin) {

firmware/esp32/gdoor/src/gdoor_rx.h

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  

firmware/esp32/gdoor/src/gdoor_tx.cpp

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  
@@ -130,7 +130,7 @@ namespace GDOOR_TX {
     }
 
     /*
-    * Function called by user to setup everything needed for GDOOR.
+    * Function called by user to setup everything needed for GDoor.
     * @param int txpin Pin number where PWM is created when sending out data
     * @param int txenpin Pin number where output buffer is turned on/off
     */

firmware/esp32/gdoor/src/gdoor_tx.h

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  

firmware/esp32/gdoor/src/gdoor_utils.cpp

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by  

firmware/esp32/gdoor/src/gdoor_utils.h

@@ -1,6 +1,6 @@
 /* 
- * This file is part of the GDOOR distribution (https://github.com/gdoor-org).
- * Copyright (c) 2024 GDOOR Authors.
+ * This file is part of the GDoor distribution (https://github.com/gdoor-org).
+ * Copyright (c) 2024 GDoor authors.
  * 
  * This program is free software: you can redistribute it and/or modify  
  * it under the terms of the GNU General Public License as published by