feat: Supported configurable uart commands

espressif · Jan 30, 2024 · 62abafd · 62abafd
1 parent 8f09599
commit 62abafd
Show file tree

Hide file tree

Showing 3 changed files with 34 additions and 26 deletions.
diff --git a/components/at/CMakeLists.txt b/components/at/CMakeLists.txt
@@ -11,6 +11,9 @@ list(APPEND srcs "src/at_default_config.c")
 list(APPEND srcs "src/at_init.c")
 list(APPEND srcs "src/at_workaround.c")
 list(APPEND srcs "src/at_cmd_register.c")
+if (CONFIG_AT_UART_COMMAND_SUPPORT)
+    list(APPEND srcs "src/at_uart_cmd.c")
+endif()
 if (CONFIG_BOOTLOADER_COMPRESSED_ENABLED)
     list(APPEND srcs "src/at_compress_ota.c")
 endif()

diff --git a/components/at/src/at_uart_cmd.c b/components/at/src/at_uart_cmd.c
@@ -8,7 +8,7 @@
 #include <stdbool.h>
 #include "sdkconfig.h"
 
-#ifdef CONFIG_AT_BASE_ON_UART
+#ifdef CONFIG_AT_UART_COMMAND_SUPPORT
 #include "driver/uart.h"
 #include "hal/uart_types.h"
 #include "freertos/FreeRTOS.h"

diff --git a/main/interface/uart/Kconfig b/main/interface/uart/Kconfig
@@ -2,33 +2,38 @@ config AT_BASE_ON_UART
     bool "AT through UART"
 
 if AT_BASE_ON_UART
-menu "AT uart settings"
 
-config AT_UART_DEFAULT_DATABITS
-    int "the uart data bits for AT port, the range is [5, 8]"
-    default 8
-    range 5 8
-    depends on AT_BASE_ON_UART
+    config AT_UART_COMMAND_SUPPORT
+        bool "Support UART AT commands"
+        default "y"
 
-config AT_UART_DEFAULT_STOPBITS
-    int "the uart stop bit for AT port, the range is [1, 3]"
-    help
-        1: 1-bit stop bit; 2: 1.5-bit stop bit; 3: 2-bit stop bit
-    default 1
-    range 1 3
+    menu "AT uart settings"
+        config AT_UART_DEFAULT_DATABITS
+            int "the uart data bits for AT port, the range is [5, 8]"
+            default 8
+            range 5 8
+            depends on AT_BASE_ON_UART
 
-config AT_UART_DEFAULT_PARITY_BITS
-    int "the uart parity bit for AT port, the range is [0, 2]"
-    help
-         0: None; 1: Odd; 2: Even
-    default 0
-    range 0 2
+        config AT_UART_DEFAULT_STOPBITS
+            int "the uart stop bit for AT port, the range is [1, 3]"
+            help
+                1: 1-bit stop bit; 2: 1.5-bit stop bit; 3: 2-bit stop bit
+            default 1
+            range 1 3
+
+        config AT_UART_DEFAULT_PARITY_BITS
+            int "the uart parity bit for AT port, the range is [0, 2]"
+            help
+                0: None; 1: Odd; 2: Even
+            default 0
+            range 0 2
+
+        config AT_UART_DEFAULT_FLOW_CONTROL
+            int "the uart flow control for AT port, the range is [0, 3]"
+            help
+                0: flow control is disabled; 1: enable RTS; 2: enable CTS; 3: enable RTS and CTS
+            default 1
+            range 0 3
+    endmenu
 
-config AT_UART_DEFAULT_FLOW_CONTROL
-    int "the uart flow control for AT port, the range is [0, 3]"
-    help
-        0: flow control is disabled; 1: enable RTS; 2: enable CTS; 3: enable RTS and CTS
-    default 1
-    range 0 3
-endmenu
 endif