[RUNALYZE v4.3.0] Release with minor fixes/changes.

This fork of Runalyze is a release fork with all needed dependencies and can be used directly with Docker. I have done some small fixes/imporvements. Because it based on the Release 4.3.0 i hope it is more future-proof in an "old" docker container.

I host it on a private Pine64 Rock64 SOC computer to host my family activities (running, walking, mountain climbing, swimming). It runs on a Debian Buster/ARM64 in a Docker container serviced with docker-compose. Debian 11 Bullseye supports PHP 7.4 and it runs without problems with some PHP warnings. As input GPS devices i use Garmin Forerunner 45S, Garmin Fenix 6 and Android-Handy with ApeMap/OruxMaps. I import my tacks without use of Garmin-Tools (like Garmin Connect) and so i think no of my private sensible health-data is transmit to the "public" cloud. If you need the Debian 10 Buster/PHP 7.3 version see the GIT tag v4.3.0_Debian10_PHP73; but this version is no more maintenance.

With my other Github project Clone of Tkl2Gpx i have imported my old running activities from the year 2012 until now into RUNALYZE. These old tracks are record with a GPS MapJack watch and transformed to GPX files imported via RUNYLZE bulk-job.

Here some fixes/improvements i have done in RUNALYZE (see details in the commits):

Fixes some small bugs until the base release is running on my environment (missing DB attribute, wrong/missing number values, ...)
Fixes some small bugs while importing FIT files from Garmin
Batch/Bulk-imports can now set/override the sports type
Imports from MapJack watch/GPX and Garmin FR45 & Fenix6/FIT results in errors because missing heart-rates and altitutes. Now the NULL will be filled.
Sport types hiking and (new) mountain climbing.
Imported filename is stored in title attribute.
Temperature of FIT files are stored in the temp attribute as average value.
2020-09-27: Import Garmin FIT "total_training_effect"-attribute (Aerob Training Effect) already with greater 0.0 (and not even 1.0)
2020-09-27: Garmin FIT "total_anaerobic_training_effect" attribute as "Anaerobic Training Effect" is imported
- Store it in the DB (runalyze_training.fit_anaerobic_training_effect)
- Added on the dataset configuration
- Also add field on statistic heart-rate view (activity main page)
- Migration 20200926230800 is necessary!
2020-09-29: Garmin FIT attributes as fit_lactate_threshold_hr, fit_total_ascent/descent (the watch original values) are imported
- Store it in the DB (runalyze_training.fit_anaerobic_training_effect)
- Shown in the statistic view (activity main page) under 'Miscellaneous' panel
- Migration 20200928150400 is necessary!
2020-09-29: Show further FIT file attributes (recovery-time, training-effect, creator, vo2max, performance-conditions, hvr) on statistic view (activity main page) under 'Miscellaneous' panel
2020-10-06: Loading weather data now uses the time in the middle of the activity (start + (duration / 2)).
2020-10-07: Add support for meteostat historical weather data while editing a activity or while bulk import. Usable with setting the new "meteostatnet_api_key" in config.yml.
2020-10-17 to 2020-11-04: Import heartrate and temperature of Fenix 6 for swimming activities.
2020-11-04: Some fixing of correlate trackdata to laps/swim-lanes.
2020-11-09: Auto detection of type "interval-training" (detection only works in batch/bulk-mode). You must configure a training-type with short-cut "IT" to your sports in the configuration to use this feature.
2021-01-02: Fix "Start date" of an existing equipment is set to the stored date (not to current date).
2021-01-02: While batch/bulk-importing of activities main equipment of the sports are assigned to new activities
- only main equipment-type are considered (set your equipment type as main equipment in the sports configuration)
- only equipment-type with single-choice considered
- a unique/time-ranged equipment must exists for this sport; if multiple equipments are found, nothing is assigned and a warning is logged while importing
- keep in mind, that f. e. multiple shoes can not be mapped because no shoe can be clearly identified
2021-01-10: Add API-REST service /api/import/activity for uploading and importing activities for an account
- The POST request must be a "multipart/form-data" to support multiple times in one request.
- This new API uses the existing command ActivityBulkImportCommand
- If no problems occur and all uploaded files are imported successfully a HTTP state 200 is returned otherwise (duplicates or failed) a state 202 is returned.
- If there are technical trouble (while creating the tmp-folder, moving files ...) a HTTP state 500 is returned.
- Additional infos and the output of the "runalyze:activity:bulk-import" are set in the response content as "Content-Type: text/plain"
- Example curl to use: curl -k -u ":" -H "Accept-Language: de,en" -X POST https:///api/import/activity -F '[email protected]' -F '[email protected]' [-w 'HttpCode: %{http_code}\n']
2021-11-05: Add tests(-folder) from the archived repository to ensure dependency changes
1. database preperation script tests/scripts/preparetests.sh (one time action per DB instance)
2. wrapper script for all tests tests/scripts/runtests.sh
- some tests has errors (i think is caused by the usage of PHP7); see runtests.sh for expected failures
- tests folder can be excluded for production environment
2021-11-09: Upgrade PHP dependencies to newer/recent versions
- only deps where none or only few code changes necessary
- changes affected composer-files, vendor folder, database migrations, tests
- Clone laufhannes/GpxTrackPoster to codeproducer198/GpxTrackPoster and use this dependency (commit from Mar 11, 2017)
2021-11-14: Upgrade web dependencies to newer/recent versions
- only javascript deps where no error occur while the resource build or the app works
- changes affected bower.json, web/vendor folder
2021-11-14: Upgrade to a newer Runalyze Glossary version (fixed commit-id dev-master#d7e2540bf51dc1aabe4dbdce85af96e8203311b6)
- Seems the last version which works with the v4.3.0
2021-11-14: Garmins Performance Condition is now saved in the purpose column for the newest watches
- Performance Condition in the "fit detail" section of an selected activity is now also displayed as a value between -20/+20
- Supported watches are: Forerunner 640 & 645 & 935 & 945 & 735, Fenix 3 & 5 & 6
- Caution: the search page still uses values based on 100; if you search for "+5" use "105" ;-)
- The value is stored so far in the column runalyze_training.fit_hrv_analysis; to fix your database you can use this sqls to move the values to fit_performance_condition: update runalyze_training set fit_performance_condition = fit_hrv_analysis where fit_performance_condition is null and fit_hrv_analysis is not null and fit_performance_condition_end is not null; and update runalyze_training set fit_hrv_analysis = null where fit_performance_condition = fit_hrv_analysis is not null and fit_performance_condition_end is not null;
2021-12-19: Add Garmins Performance Condition and Respiration Rate from the FIT activity files to new database-continuous-data columns and show it as diagrams
- Store Performance Condition (not the single "start" and "end" value of the FIT details) in runalyze_trackdata.performance_condition while importing FIT file
- Store Respiration Rate in runalyze_trackdata.respiration_rate while importing FIT file
- Show Performance Condition as line diagram in the Miscellaneous panel if available
- Show Respiration Rate as line diagram in the HVR panel if available (resp-rate is only available for me with my Fenix 6 if i use a HRM-Run sensor)
- Do same fixes to diagrams so not every time-tick needs a value (needed for Performance Condition because tracking starts from one kilometer)
- Migration 20211215213500 is necessary!
2021-12-20: Support Garmins Respiration Rate (avg & max) and self-evaluation-fields (feeling & perceived effort) for FIT activity import and show the values
- New db columns in table training: fit_self_evaluation_feeling, fit_self_evaluation_perceived_effort, avg_respiration_rate, max_respiration_rate
- Display and search for AVG Respiration Rate in the dataview settings/activity table and in the HRV detail section
- Show all values in the FIT details section
- self-evaluation-fields are only available with the Fenix watches with a firmware 19.20 and you must activate self-evaluation for your the activities
- Parsing self-evaluation-effort with the enum SelfEvaluationPerceivedEffort to a human readable text same as Garmin Connect shows
- Migration 20211219161500 is necessary!
2021-12-20: Use codeproducer198 glossary and add links to new entries: respiration, running dynamics, self-evaluation

2021-12-22: Fix previous hack of setting null-values to 0 in the continous data of GroundContactTime, VerticalOscillation, VerticalOscillation, Strokes, StrokeType, Cadence, Temperature

Some calculations (f.e. balance in the round detail view) result in small failure outcomes because 0 is calculated - null will be ignored for the calculation; mostly in the round details

To fix the 0 to null for GroundContactTime, VerticalOscillation, VerticalOscillation you can use following sql commands:

 update runalyze_trackdata set groundcontact = regexp_replace(regexp_replace(groundcontact, '\\|0\\|', '\\|\\|'), '\\|0\\|', '\\|\\|')                 where groundcontact is not null and groundcontact like '%|0|%';
 update runalyze_trackdata set groundcontact = regexp_replace(groundcontact, '^0\\|', '\\|')                                                           where groundcontact is not null and groundcontact like '0|%';
 update runalyze_trackdata set groundcontact = regexp_replace(groundcontact, '\\|0$', '\\|')                                                           where groundcontact is not null and groundcontact like '%|0';
 update runalyze_trackdata set vertical_oscillation = regexp_replace(regexp_replace(vertical_oscillation, '\\|0\\|', '\\|\\|'), '\\|0\\|', '\\|\\|')   where vertical_oscillation is not null and vertical_oscillation like '%|0|%';
 update runalyze_trackdata set vertical_oscillation = regexp_replace(vertical_oscillation, '^0\\|', '\\|')                                             where vertical_oscillation is not null and vertical_oscillation like '0|%';
 update runalyze_trackdata set vertical_oscillation = regexp_replace(vertical_oscillation, '\\|0$', '\\|')                                             where vertical_oscillation is not null and vertical_oscillation like '%|0';
 update runalyze_trackdata set groundcontact_balance = regexp_replace(regexp_replace(groundcontact_balance, '\\|0\\|', '\\|\\|'), '\\|0\\|', '\\|\\|') where groundcontact_balance is not null and groundcontact_balance like '%|0|%';
 update runalyze_trackdata set groundcontact_balance = regexp_replace(groundcontact_balance, '^0\\|', '\\|')                                           where groundcontact_balance is not null and groundcontact_balance like '0|%';
 update runalyze_trackdata set groundcontact_balance = regexp_replace(groundcontact_balance, '\\|0$', '\\|')                                           where groundcontact_balance is not null and groundcontact_balance like '%|0';

This will fix little failure displays of the running dynamics in the round view and the diagrams. It has no effect on the average/summarys of the running dynamics.

For the other datas a fix is not so easy and makes no sense
From now on the missing values are stored with a null in the related array index and the calculation/display is fixed to handle these null-values indexes

2021-12-27: Add GAP/GradientAdjustedPace value in dataview (based on the existing Minetti algorithm)
- Only for running activities and not stored in the database; only calculated while displaying
- I'am not happy with the results, but I'll leave it that way for now; for me it always display the same or higher as the "normal" pace (perhaps the up/down is almost the same for me)
2022-01-30: New activity icons and activities
- Add 12 new activity icons (climbing, snow activities, golf, kayak, tennis, surfing ...)
- New activity snow shoeing and cross-country-skiing can be added to your account and are recognised while importing from Garmin Fenix 6
2022-08-29:
- Fix importing the power average produced by Stryd (thanks to tgradl)
2022-08-30:
- New activity bouldering and indoor climbing can be added to your account and are recognised while importing from Garmin Fenix 6
- Limitation: the routes (how many and difficulty), rest times and some other values are not imported yet -> hope this comes in the future when i understand the boulder/climbing FIT structure
2022-11-20:
- For swimming Garmin's Firmware writes rest-laps in the FIT files (when using LAP button on the watch). This are considered:
1. While importing such activity, this laps are set to "deactivate/ruhe" and will not shown (or special shown) in the laps widgets
2. SWOLF calculation ignore rest-laps
3. lanes widget shows more details if the activity has rest-lanes
4. time of the activity is the real swimming time (without rests times)
5. Optimize/fix the lanes-windows assignement of trackdata to laps based on the time
6. Implementation depends on StrokeTypeProfile::BREAK
2022-11-27:
- New average heart-rate for active rounds is a hr-value, only calculated based on active rounds/laps (inactive/"Ruhe" will ignored); this is relevant if you swimming with a Fenix and use the LAP button for rests/breaks
- New db field runalyze_training.pulse_avg_active
- Field is on the details view in the heart-rate section (only if the rate differs from the normal), in the dataset and in the search formular
- If there no inactive rounds (means only active rounds), the normal avg heart-rate is set in this new field
- Migration 20221123203500 is necessary! it will fill the pulse_avg_active with the content of pulse_avg
2022-11-28:
- Optimize temperature determination on the activity (attribute training.temperature)
1. if available: use the avg temperature from the FIT session
2. if no data is set until now -> if available: use the avg temperature from the FIT battery recodings (every 5 minutes)
3. if no data is set until now -> if available: use the average of stored temperatures in the track-/continuous-data
4. if bulk import and outdoor-sport with external weather is successful loaded, use this data
- show always the temperature in the dataset if available (independent of indoor/outdoor)
2022-11-29: Auto detection of type "Regeneration Run" (RG) while importing activity based on self-evaluation
- You must configure a training-type with short-cut RG to your sports (of default RG exists)
- Detection only works in batch/bulk import mode
- Works on Fenix self-evaluation (Selbsteinschätzung), where you set
  - perceived effort = 1 ("empfundene Anstrengung", very light/sehr leicht)
  - and feel evaluation = 5 ("Gefühl", very strong/sehr stark)
2022-12-04:
- New activity strength training (=Krafttraining) can be added to your account and are recognised while importing from Garmin Fenix 6
- New database field training.total_cycles will be stored the total cycles/iterations of activity; this info be also available in the dataset-view and in the miscellaneous section
- Small changes to show laps and details of laps, if no distance is stored and the sport is a "no distance"-sport
- Limitation: only the sets (active and rest) will be stored as "laps" with the duration; no cycles, type and wights on set/lap-level
- Note: total_cycles can also be imported in other sports activities
- Migration 20221204190000 is necessary!
2022-12-05: Set default decimal for distances from 2 to 3 decimal places; this affected detail views; this is better for swimming distances
2022-12-06: Garmin FITs training load peak (=Trainingsbelastung) is now support (after a long time of search ;-))
- New database field training.fit_load_peak will be stored the "Belastung"
- Importing the field, available in the dataset and shown on the "FIT detail" section of a selected activity
- Add glossary entry for training load peak; available on the "FIT detail" with the ?
- Migration 20221206170000 is necessary!
2022-12-07: Auto detection of type "Tempo run" (TR) while importing activity based on self-evaluation
- You must configure a training-type with short-cut TR to your sports (default TR exists)
- Detection only works in batch/bulk import mode
- Works on Fenix self-evaluation (Selbsteinschätzung), where you set
  - perceived effort = 10 ("empfundene Anstrengung", maximum)
  - and feel evaluation = 1 ("Gefühl", very weak/sehr schwach)
2022-12-11: Show the pauses in a table on the miscellaneous-section
- The pause table is only available if pauses exists
- Add the pause number/index in the leaflet's tooltip
2022-12-11: Tune the combined section (heart-rate, pace, elevation)
- Show additionally the GAP in the Pace & heartrate diagram
- Show additionally the GAP and gradient in the Pace & heartrate & elevation diagram
- Show additionally "average heart-rate for active rounds", GAP and FITs-training-effects in the combined table
2022-12-12: Optimize the storing of elevations regarding original and corrected values
- Until now: if you have a barometric-supported device, the corrected elevations additionally stored in route.elevations_corrected and the original and corrected are the same; this was necessary to suppress the correction of "good barometric" data; in this cases it was not full clear in the UI about this
- "Correction" in this context means the altitude correction via GeoTiff due "bad" GPS elevations
- Now: if you have a barometric-supported device, the original elevations are stored only in route.elevations_original and the new flag route.altitude_barometric is set to true
- In the elevation calculation-window now it's a clear note, if the data are from a barometric device and if there are corrected or not
- As before, the data of barometric-supported devices are not corrected, even the configuration user wants elevations to be corrected is set
- By default all existing routes will be set to route.altitude_barometric = 0 = false; if you want to "migrate" existing routes to barometric-device use this: update runalyze_route set elevations_corrected = null, altitude_barometric = 1 where elevations_original = elevations_corrected and elevations_corrected is not null and elevations_source = '' and altitude_barometric = 0;
- If available show the ascent/desent from your device on the elevation calculation-window for better comparison of the calculated values
- Migration 20221212190000 is necessary!
2022-12-27: Retrieve route name, cities and additional infos regarding your route of the activity and store it while bulk importing
- Based on the route (GPS) coordinates, the informations are fetched from the OpenStreetMap API Overpass
- If a activity has route coordinates following will be determined:
  1. peaks and sattles (order by elevation; first highest)
  2. places
    - city>town>village>hamlet...; order by OSM-"size" of the place
    - (alpine) huts
    - waters (sea, lakes...)
    - forests/woods
  3. hiking ways (like Kramersteig or Maximiliansweg)
  4. any tourism information's
- Where possible, the DE (german) name of OSM is used, otherwise the name
- In normal cases (when all informations are available), the training.route, route.name and route.cities contains 1. and 2.; if the limit of 255 chars is exceeded, it will cut clean at the latest fitted name
- The names will be seperated with the - delimiter (to extract the often places)
- The training.notes includes informations of 3. and 4. in a section marked with Strecken-Info at the end of existing text
- If some information are not found in OSM, this priority can changed
- This works only on the bulk import
- It's also possible to update existing activities with the command /usr/bin/php /app/runalyze/bin/console runalyze:activity:bulk-routeval --env=prod [--nexted] [--override] username trainingId
  - --nexted fetch the next activity and also update it; so long as next activities exists (like multi update)
  - --override overrides possible existing data with the newest determined informations
- With the configration parameters osm_overpass_url or/and osm_overpass_proxy you can configure the Overpass API endpoint and a proxy-server. A good Overpass (without limits) is https://overpass.kumi.systems/api/interpreter or your own local instance. The proxy can be used for Tor to "hide" your IP. If no osm_overpass_url is configured, no determination is occured
2022-12-29: Weather loading is processed only, if the bulk-imported activity is "outside"
- Support of HTTP proxy via configuration weather_proxy for OpenWeatherMap and MeteostatNet
- If loading via MeteostatNet fails, a Exception will be thrown
2022-12-29: Fix JS error in dataview datepicker; add 20 previous years in dataview datepicker
2023-01-08: Add support for sports on equipment level is now relevant while bulk import
- Currently only sports can be assigned on equipment types (=category); now these sports from the type level can be detailed on equipment level
- This affects for a better automatic assigment during bulk imports and is now required for bulk import
- This also means if you want no assignment while bulk imports, do not assign a sports on this equipment
- Fixing: now the equipment duration&distance will be decreased, when a activities is being deleted
- Limitations:
  - Automatic equipment assignment only works on bulk import (command) and if multiple active equipments for one type are found, this assignment will be ignored
  - If you remove in the equipment-type dialog a assigned sports, please remove it also on the equipments (if you has assigned it too); i've skimp the programm support for this ;-)
  - Not sure: but it's possible that the Runalyze backup feature is no more working with my changed regarding equipment_spor; test it before use it in production
- Migration 20230101190000 is necessary! to create the new table runalyze_equipment_spor
- Don't forget to adds sports to your equipments, when you want auto assignment during bulk import
2023-01-11: Fixing: don't loose read-only power value when update a activity via the edit dialog
2023-01-11: Change the Borg RPE (values from 6-20) to the Borg CR10 scale (values 1-10) and Emoji's for self-evaluation feeling
- When the imported activity has a Garmin Fenix self-evaluation (Selbsteinschätzung), this value will be also used for the RPE; this will not affected when the self-evaluation is used for the auto detection of the activity type (see #2022-12-07)
- Adapt the glossary
- During the migration existing training.fit_self_evaluation_perceived_effort will be assumed to RPE (if it not already set manually)
- Migration 20230111150000 is necessary! to migrate your existing values to the Borg CR10
2023-02-03: Store additional informations of strength training (=Krafttraining) in the new database field training.splits_additional
- This includes the FIT informations about weight, repetitions and the excercises (only in english Sdk names) name based on the FitSdk
- The new field training.splits_additional is a JSON structure, which can be used in future for other activities; details of structure see inc/core/Parser/Activity/FileType/FitSplitsAdditionals.php
  - Limitations of training.splits_additional: if you edit/change a activity, these data is not updated! but this is a general problem of Runalyze
- The activity details are shown in the UI laps-window table; all available values of the JSON will be shown dynamic
- Migration 20230201200000 is necessary!
2023-02-05: Show more swimming details on the UI laps-window table
- strokes/lane, Swolf, Swolf-cycles, total-lanes, total-strokes for one (active) lane (these data are constructed from the swimdata array)
- store additionally the total-strokes of one lane in the training.splits_additional (for better further SQL analysis)
2023-02-05: Store and show caloriens on details on the UI laps-window table per lap
2023-02-19: New activity-type E-MTB Mountain can be added to your account and are recognised while importing from Garmin Fenix 6
2023-02-25: Increase limit of concurrent Routenets and support of Position interval
- Limit of shown routes at once is increased from 50 to 250; set this for your fits in plugin/RunalyzePluginStat_Strecken/class.RunalyzePluginStat_Strecken.php-MAX_ROUTES_ON_NET regarding your concurrent users, memory settings...
- With Position interval you can set to show only every n GPS route position (default=All=1 show every point); this reduce the total number of shown positions and therefore the number of shown routes increases; so it is possible to show in total 1250 routes with every fifth position/point
- Add a tooltip on the routenet-page for the routes with date, name and distance
2023-02-26: Fix a mismatch in the lap-table and lap-popup; in some activities a additional (1 second) round is shown in the popup
2023-03-06: Upgrade to PHP 7.4 and Debian 11
- Upgrade to phpunit v8.5 including adaptions of the tests
- Update of some dependencies to newer (minor) versions
- Adapt poster generations (type circular) inkscape v1.0.2 of Debian 11 (change in the parameters)
2023-03-12: For imported activities bases on a workout, the name is added to the imported activity note
2023-03-25: One new sport activity HIIT Cardio for Garmins HIIT and Cardio workouts can be added to your account and are recognised while importing
2023-03-26: New detailed 100meter interval table and better handling of swim-rest-lanes in UI tables
- Add a new table for pool-swimming with detailed information about 100 meter intervals (like pace, SWOLF, strokes and difference to the previous 100m interval)
- Fix calculation of lanes, strokes, Swolf on the UI laps-window table in case of including rest lanes
- Optimize representation of swimming rest lanes in the lanes table/widget
2023-11-18: Support of Garmins Run/Walk recognition and PacePro (named 'Pace Goal' in Runalyze)
- Add 3 new columns to training to store the Run/Walk recognition; the values are shown in the 'Miscellaneous' panel > 'Fit details'; also add a new Glossary entry Laufen-/Gehen-Erkennung for this
- Import of Pace Goal plan and the differences of a run activity; so you can compare the plan and the real running time/paces of the run activity in the 'Laps' panel > 'Pace Goal'
- The Pace Goal related values are stored as JSON in training.pace_goal
- Auto detection of running-training-type "Pace Goal" (detection only works in batch/bulk-mode). You must configure a training-type with short-cut "PG" to your sports in the configuration to use this feature.
- If you change your distance/duration of a Pace Goal activity in the edit function, a warning in the 'Pace Goal' panel will shown.
- Migration Version20231115200000 is necessary!
2024-05-09:
- Add Open the activity in a new browser tab/window in the dataset to open activities in a new tab
  - it's a new dataset key and must be enabled in the dataset configuration
- From a FIT activity the new columns max_hr_user, hr_zone_bounds and fit_seconds_hr_zones are stored in training table
- Your FIT time_in_zone maximal heart-rate (max_hr_user) of imported activities will create a new users body data in case of changes in the max HR
  - per default this behaviour is disabled; you can enable it in the configuration > activity-form > Import max heart-rate
  - if enabled, it only works while batch/bulk-imports and for a bulk-import the highest HRs will be used
  - only the main sport will be used for determine the max HR
  - comment of the newly created body data will be New max pulse is set while importing main-sports activity.
- You can create per sport your own heart-rate zones in the sports configuration dialog based on the given bpm's
  - its stored in sports.hr_zone_bounds
  - see the hint in the dialog for the format of the given input
- Optimize the heart rate zone widget
  - the HR zones from the FIT (hr_zone_bounds of your device) is used to shows the same HR zones as your device
  - priority of the zones are: 1. the activity zones, 2. the sport zones, 3. default zones are used
  - the default HR zones still are the 10-percent steps of your maximal HF (if max_hr_user is imported with the activity this is used, otherwise the users body data max HF)
  - fit_seconds_hr_zones is currently only stored, but not used/shown (the FIT/devices seconds in the hr_zone_bounds)
- Default page (index) is now the login page (not the register page; think this make more sense for private instances)
- Fix old error in swim activities which results in 500 when opening
- Fix old error in some actions (f.e. edit a activity) the data browser fall back to current month selection (and not the previous selected time range)
- Migration Version20240516200000 is necessary!
2024-05-21:
- Add quick/shortcut-filters of sports(-icons) in the header of the data browser; show maximal 7 recent sports available in the current time-range selection
- Bit larger/optimized navigation icons in the header for calender, previous, next, today (hope it's easier for tablet usage)
- In the data view for pace and heart rate columns a percent-bar is shown in the background of the cell
  - for heart rate users body-data's rest- and max-HR are used for calculation (if not available, use the hardcoded defaults from inc/core/Dataset/Keys/HeartrateAverage.php)
  - pace
    - the min/max ranges for calc per sport are currently hardcoded in inc/core/Dataset/Keys/Pace.php; in the future this could be configurable per sports
    - gray bar means time-based (like minutes/km or minutes/100m) and blue is decimal-based (like km/h)
    - for pace currently only the based sports running, cycling and swimming are supported
2024-05-31:
- lap intensisty defines the intensity of one lap; it's more than active or resting
  - lap intensisty now support not only active and resting; it supports more values like recovery, warmup, cooldown
  - this is availabe in the activity edit view
  - in the laps window it's shown as a new column, if more than active and resting exists for this activity
  - it is importing for FIT activities from the workout informations
  - it's store as before in training.splits as a char; active laps as still no char
- training workout custom targets
  - for Garmin trainings custom targets for pace or heart rate is imported from FIT activities
  - in the laps windows this values are new columns
  - the information is stored in training.splits_additional in the JSON structure with the unit of meter/second
- the laps windows is now wider to show more columns
- the dataset Settings now contains also the sub-menu items of Tools; if you want to revert this, set inc/core/Dataset/Keys/Setting.php#INCLUDE_TOOLS to false

Please notice:

All the changes are only done for me to use this great product for me.
I don't take any responsibility if you running this version on your infrastructure and have problems.
The extensions i made was done on a release version. So i do not build a release. I have no translations for the new features (always use german language).

Database migration

For Migration of the Database use the commands:

Check state: /usr/bin/php /app/runalyze/bin/console doctrine:migrations:status --env=prod --show-versions
Do it: /usr/bin/php /app/runalyze/bin/console doctrine:migrations:migrate --env=prod [--dry-run]
Rollback to an previous version: /usr/bin/php /app/runalyze/bin/console doctrine:migrations:migrate --env=prod <VersionAufDieZurückgerolltWerdenSoll> Notice: Do the migration with your "project" user.

Name		Name	Last commit message	Last commit date
Latest commit History 148 Commits
app		app
bin		bin
call/perl		call/perl
data		data
inc		inc
lib		lib
plugin		plugin
src		src
tests		tests
var		var
vendor		vendor
web		web
.bowerrc		.bowerrc
.gitignore		.gitignore
.htaccess.dist		.htaccess.dist
CHANGELOG.md		CHANGELOG.md
README.md		README.md
bower.json		bower.json
composer.json		composer.json
composer.lock		composer.lock
dashboard.php		dashboard.php
gulpfile.js		gulpfile.js
package-lock.json		package-lock.json
package.json		package.json
resources.json		resources.json

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

[RUNALYZE v4.3.0] Release with minor fixes/changes.

Database migration

About

Releases

Packages

Languages

codeproducer198/Runalyze

Folders and files

Latest commit

History

Repository files navigation

[RUNALYZE v4.3.0] Release with minor fixes/changes.

Database migration

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages