Domoticz SNMP Reader for multiple devices

With this plugin you can bring several SNMP OID per ip address each time on your Domoticz server.

Debian Requirements:

• Install "python3-pysnmp4" with "sudo apt-get install python3-pysnmp4"

Domoticz Installation instructions:

• Create Plugin Folder "SNMPreader2" under "domoticz/plugins" folder

• Save this script as "plugin.py" on "SNMPreader2" folder

• Restart domoticz service.

• Add a new entry of this Hardware on your domoticz installation (Setup/Hardware/select and add "SNMPreader2")

• use OID prefix the part of the OID that is the same for all values you have to read Example: .1.3.6.1.2.1.2.2.1.

• Use OID list for the list of OID's you want to read Each OID is follow by the type in Domoticz of the OID's The type Speed is used to calculate the speed from a octet counter

  Example: 10.5;Speed|16.5;Speed|10.1;Speed|16.1;Speed|10.4;Speed|16.4;Speed

  This example will read OID's and calculate the speed from it

  .1.3.6.1.2.1.2.2.1.10.5     inOctets on WAN2   
  .1.3.6.1.2.1.2.2.1.16.5     outOctets on WAN2       
  .1.3.6.1.2.1.2.2.1.10.1     inOctets on LAN 
  .1.3.6.1.2.1.2.2.1.16.1     outOctets on LAN 
  .1.3.6.1.2.1.2.2.1.10.4     inOctets on WAN1        
  .1.3.6.1.2.1.2.2.1.16.4     outOctets on WAN1
  

  With .1.3.6.1.2.1.4.20.1.1#1 you can get the first element of the ipAddrTable (WAN) table. of course you can use #2 for the second in case of dual WAN modems
  Normally you shouled use .1.3.6.1.2.1.4.20.1.1.192.168.1.1 But if you don't know your IP you don't have the OID.

Hope you like it!!