Skip to content
This repository has been archived by the owner on Oct 28, 2024. It is now read-only.

System Requirements

tim dettmar edited this page Sep 21, 2021 · 1 revision

System Requirements

Telescope requires NICs that are capable of RDMA transfers. Below is a non-exhaustive list of NICs that support RDMA, whether in software or hardware.
Please note that RoCE/iWARP support must match on both ends!

NIC Series RoCE v1 RoCE v2 iWARP Details Tested
1 Generic Non-RDMA Ethernet Cards πŸ”΄ 🟑 🟑 Realtek "network cards" etc.
2 HP NC523SFP (QLogic cLOM8214) πŸ”΄ 🟑 🟑 Ethernet 10GbE βœ”οΈ
3 Mellanox ConnectX-3 EN 🟒 🟑 🟑 Ethernet 10GbE βœ”οΈ
4 Broadcom/Emulex OneConnect OCe14000 🟒 🟑 🟑 Ethernet 10/40GbE
5 Mellanox ConnectX-3 Pro EN 🟒 🟒 🟑 Ethernet 10/40/56GbE
6 Mellanox ConnectX-4 Lx EN 🟒 🟒 🟑 Ethernet 10/25/40/50GbE
7 Intel X722 πŸ”΄ 🟑 🟒 Ethernet 10GbE
8 Marvell/QLogic FastLinQ 41000 🟒 🟒 🟒 Ethernet 10/25GbE
9 Marvell/QLogic FastLinQ 45000 🟒 🟒 🟒 Ethernet 10/25/40/100GbE

πŸ”΄ Unsupported
🟑 Software only
🟒 Hardware support

Clone this wiki locally