prep Hybrid: add Hybrid compile examples

platformio_tasmota_cenv_sample.ini

@@ -67,6 +67,85 @@ build_flags                 = ${env:tasmota32_base.build_flags}
                               -DUSE_LVGL_OPENHASP
                               -DOTA_URL='""'
 
+[env:tasmota32-WPA3_SAE]
+; Arduino libs with WiFi Enterprise support
+extends                     = env:tasmota32_base
+build_flags                 = ${env:tasmota32_base.build_flags}
+                              -DFIRMWARE_TASMOTA32
+                              -DOTA_URL='""'
+lib_ignore                  = Micro-RTSP
+custom_sdkconfig            = CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT=y
+                              CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=y
+                              CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=y
+
+[env:tasmota32s3-qio_opi_per]
+; device needs >= 8MB Flash!! Hybrid compile for max. performance when using Displays
+extends                     = env:tasmota32_base
+board                       = esp32s3-qio_opi_120
+board_build.partitions      = partitions/esp32_partition_app3904k_fs3392k.csv
+board_upload.flash_size     = 8MB
+board_upload.maximum_size   = 8388608
+build_unflags               = ${env:tasmota32_base.build_unflags}
+                              -Os
+                              -ffunction-sections
+build_flags                 = ${env:tasmota32_base.build_flags}
+                              -Ofast
+                              -mtext-section-literals
+                              -DUSE_BERRY_ULP
+                              -DFIRMWARE_LVGL
+                              -DUSE_LVGL_OPENHASP
+                              -DOTA_URL='""'
+custom_sdkconfig            = '# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set'
+                              CONFIG_COMPILER_OPTIMIZATION_PERF=y
+                              '# CONFIG_ESP_DEBUG_INCLUDE_OCD_STUB_BINS is not set'
+                              '# CONFIG_LWIP_PPP_SUPPORT is not set'
+                              '# SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE is not set'
+                              CONFIG_SPIRAM_MODE_OCT=y
+                              CONFIG_SPIRAM_SPEED_120M=y
+                              CONFIG_SPIRAM_IGNORE_NOTFOUND=y
+                              '# CONFIG_SPIRAM_MEMTEST is not set'
+                              CONFIG_LCD_RGB_ISR_IRAM_SAFE=y
+                              CONFIG_GDMA_CTRL_FUNC_IN_IRAM=y
+                              CONFIG_I2S_ISR_IRAM_SAFE=y
+                              CONFIG_GDMA_ISR_IRAM_SAFE=y
+                              CONFIG_SPIRAM_XIP_FROM_PSRAM=y
+                              CONFIG_SPIRAM_FETCH_INSTRUCTIONS=y
+                              CONFIG_SPIRAM_RODATA=y
+                              CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240=y
+                              CONFIG_ESP32S3_DATA_CACHE_64KB=y
+                              CONFIG_ESP32S3_DATA_CACHE_LINE_64B=y
+
+[env:tasmota32c2-no-NAPT]
+; Hybrid compile: No IDF BT support, disabled PPP, Ethernet and NAPT
+extends                     = env:tasmota32_base
+board                       = esp32c2
+build_flags                 = ${env:tasmota32_base.build_flags}
+                              -DFIRMWARE_TASMOTA32
+                              -DOTA_URL='"http://ota.tasmota.com/tasmota32/release/tasmota32c2.bin"'
+lib_ignore                  = ${env:tasmota32_base.lib_ignore}
+                               Micro-RTSP
+custom_sdkconfig            = 
+                              '# CONFIG_BT_ENABLED is not set'
+                              '# CONFIG_BT_NIMBLE_ENABLED is not set'
+                              '# CONFIG_BT_CONTROLLER_ENABLED is not set'
+                              CONFIG_BT_CONTROLLER_DISABLED=y
+                              '# CONFIG_LWIP_IP_FORWARD is not set'
+                              '# CONFIG_LWIP_IPV4_NAPT is not set'
+                              '# CONFIG_LWIP_IPV4_NAPT_PORTMAP is not set'
+                              '# CONFIG_ETH_ENABLED is not set'
+                              '# CONFIG_ETH_USE_SPI_ETHERNET is not set'
+                              '# CONFIG_ETH_TRANSMIT_MUTEX is not set'
+                              '# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set'
+                              '# CONFIG_ETH_SPI_ETHERNET_W5500 is not set'
+                              '# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set'
+                              '# CONFIG_LWIP_PPP_SUPPORT is not set'
+; disable not needed IDF managed components for Arduino libs compile
+custom_component_remove     = espressif/esp_hosted
+                              espressif/esp_wifi_remote
+                              espressif/esp_modem
+; add IDF component from espressif registry for Arduino libs compile
+custom_component_add        = espressif/esp-dsp @ ^1.5.2
+
 [env:tasmota32s3-opi_opi]
 extends                     = env:tasmota32_base
 board                       = esp32s3-opi_opi