fix(Documentation): MAX32690 Update USB README Required Connections for SW2 #1155
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
Some USB projects trigger functions on the SW2 interrupt for the MAX32690, which is routed to P4.0. However, GPIO4 does not support general purpose interrupts - only LP wakeup interrupts.
The project requires connecting P4.0 to P0.7 so that the P0.7 interrupt can be used when SW2 is pressed, but this was missing from the required connections section.
Checklist Before Requesting Review