On travaille avec un raspberry, pas avec un arduino.
On n'est pas à la recherche de performances temps réel.
https://www.circuits.dk/everything-about-raspberry-gpio/
http://gilles.thebault.free.fr/spip.php?article44
https://github.com/WiringPi/WiringPi-Python
Il faut avoir installé wiringPi
pip3 install wiringpi
wget https://raw.githubusercontent.com/alexjunk/GTCworkout/main/src/relay2.py
http://sarakha63-domotique.fr/jeedom-domotiser-une-vanne-3-voies/
moteino https://lowpowerlab.com/shop/product/196
https://github.com/LowPowerLab/RFM69
https://github.com/jgillula/rpi-rfm69
https://jeelabs.org/ avec un magasin en ligne : https://www.digitalsmarties.net/
the library : https://github.com/jeelabs/jeelib
la doc : https://jeelabs.org/pub/docs/jeelib/files.html
RF69 on a RPI : https://jeelabs.org/2015/05/20/rfm69-on-raspberry-pi/index.html
https://github.com/sui77/rc-switch
https://www.dfrobot.com/blog-409.html
rcswitch with rfm12 : https://jeelabs.org/forum/node/1472.html and https://jeelabs.org/forum/files/RFM12B_Receive_RC_switch.pde
https://github.com/gqrx-sdr/gqrx , exploitant des récepteurs qu'on peut connecter au port usb du PC, cf https://www.sdrplay.com/
https://gqrx.dk/supported-hardware#fcd
utilisant le GPIO du raspberry comme antenne : https://github.com/F5OEO/rpitx
What is a band pass filter and why do I need it to use rpitx with an antenna? https://groups.io/g/rpitx/topic/what_is_a_band_pass_filter/29595643?p=
doc : https://www.rtl-sdr.com/wp-content/uploads/2016/12/ASK_erhard_e_tutorial.pdf?ffccfa&ffccfa
http://madscientistlabs.blogspot.com/search?q=davis
Rfm69 and davis vantage : https://github.com/dekay
https://hackingathome.com/2017/02/07/danfoss-wireless-thermostat-hacking-part-two/
https://github.com/imax9000/Arduino-PID-Library
https://github.com/br3ttb/Arduino-PID-Library/blob/master/PID_v1.cpp
http://brettbeauregard.com/blog/2011/04/improving-the-beginners-pid-introduction/
https://www.rocketscream.com/blog/
https://www.abcclim.net/regulation-p-pi-pid.html
http://www.ferdinandpiette.com/blog/2011/08/implementer-un-pid-sans-faire-de-calculs/