Skip to content

A sketch for a paper re-pulp-er prototype.

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT
Notifications You must be signed in to change notification settings

acodili-jg/grprp

Repository files navigation

GRPRP

Golden Rose's Paper Re-pulper Prototype

Rust project for the Arduino Uno.

Build Instructions

  1. Install prerequisites as described in the avr-hal README (avr-gcc, avr-libc, avrdude, ravedude).

  2. Run cargo build to build the firmware.

  3. Run cargo run to flash the firmware to a connected board. If ravedude fails to detect your board, check its documentation at https://crates.io/crates/ravedude.

  4. ravedude will open a console session after flashing where you can interact with the UART console of your board.

License

Licensed under either of

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

About

A sketch for a paper re-pulp-er prototype.

Resources

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages