Building external dependencies for CentOS 7 with Devtoolset

Jump to bottom

Alexander Koufos edited this page Mar 17, 2019 · 16 revisions

Building External Dependencies

True Reality v0.1 Dependencies List

For best results, build the dependencies in the order they are listed. Some of them depend on others. Furthermore, some compilations require environment variables to be set. Please verify you have setup all the TR Environment Variables first.

Linux

[Notes]

Before running any of the commands below, make sure you are using the correct version of devtoolset you would like to use. This can be done by running . /opt/rh/devtoolset-X/enable, where X is the version number you'd like to use.

All install paths in the processes below use "$TR_ROOT/Ext" as the install path. You will have to make sure the environment variables are setup for Linux before running this command.

You can use any number instead of the 7 in the make -j7 install commands below. This is the number of threads used when compiling.

YASM 1.3.0

Download YASM 1.3.0

In terminal, go to the folder in which you downloaded the source and run the following:

   unzip yasm-1.3.0.zip
   cd yasm-1.3.0
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      ../
   make -j7 install
   cd ../build-release
   cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      ../
   make -j7 install

GLEW 2.1.0

Download GLEW 2.1.0

In terminal, go to the folder in which you downloaded the source and run the following:

   tar -zxvf glew-2.1.0.tgz
   cd glew-2.1.0
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DOpenGL_GL_PREFERENCE=GLVND \
      ../build/cmake
   make -j7 install
   cd ../build-release
   cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DOpenGL_GL_PREFERENCE=GLVND \
      ../build/cmake
   make -j7 install

Boost 1.69.0

Download Boost 1.69.0

In terminal, go to the folder in which you downloaded the source and run the following:

   tar -zxvf boost_1_69_0.tar.gz
   cd boost_1_69_0
   ./bootstrap.sh
   ./b2 tools/bcp
   ./dist/bin/bcp \
      --boost=. \
      --namespace=trBoost \
      --scan \
      $TR_ROOT/src/trBase/UniqueId.cpp \
      $TR_ROOT/include/trBase/UniqueId.h \
      $TR_ROOT/Ext/include

Jsoncpp 1.8.4

Download Jsoncpp 1.8.4

In terminal, go to the folder in which you downloaded the source and run the following:

   unzip jsoncpp-1.8.4.zip
   cd jsoncpp-1.8.4
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DBUILD_SHARED_LIBS=ON \
      -DBUILD_STATIC_LIBS=OFF \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DJSONCPP_WITH_TESTS=OFF \
      -DJSONCPP_WITH_POST_BUILD_UNITTEST=OFF \
      -DJSONCPP_WITH_PKGCONFIG_SUPPORT=OFF \
      -DJSONCPP_WITH_CMAKE_PACKAGE=OFF \
      ../
   make -j7 install
   cd ../build-release
   cmake \
      -DBUILD_SHARED_LIBS=ON \
      -DBUILD_STATIC_LIBS=OFF \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DJSONCPP_WITH_TESTS=OFF \
      -DJSONCPP_WITH_POST_BUILD_UNITTEST=OFF \
      -DJSONCPP_WITH_PKGCONFIG_SUPPORT=OFF \
      -DJSONCPP_WITH_CMAKE_PACKAGE=OFF \
      ../
   make -j7 install

Google Test 1.8.1

Download Google Test 1.8.1

In terminal, go to the folder in which you downloaded the source and run the following:

   tar -zxvf googletest-release-1.8.1.tar.gz
   cd googletest-release-1.8.1
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      ../
   make -j7 install
   cd ../build-release
   cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      ../
   make -j7 install

Zlib 1.2.11

Download zlib 1.2.11

In terminal, go to the folder in which you downloaded the source and run the following:

   unzip zlib-1.2.11.zip
   cd zlib-1.2.11
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      ../
   make -j7 install
   cd ../build-release

   cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      ../
   make -j7 install

FFmpeg n3.4.4

Download FFmpeg n3.4.4

In terminal, go to the folder in which you downloaded the source and run the following:

   unzip FFmpeg-n3.4.4.zip
   cd FFmpeg-n3.4.4
   ./configure \
      --arch=x86_64 \
      --disable-static \
      --enable-shared \
      --enable-x86asm \
      --enable-asm \
      --enable-ffplay \
      --prefix=$TR_ROOT/Ext
   make -j7 install

LibJpeg 9c

Download LibJpeg 9c

In terminal, go to the folder in which you downloaded the source and run the following:

   tar -zxvf jpegsrc.v9c.tar.gz
   cd jpeg-9c
   ./configure --prefix=$TR_ROOT/Ext
   make -j7 install

LibPng 1.6.32

Download LibPng 1.6.32

In terminal, go to the folder in which you downloaded the source and run the following:

   tar -zxvf libpng-1.6.32.tar.gz
   cd libpng-1.6.32
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DOpenGL_GL_PREFERENCE=GLVND \
      ../
   make -j7 install
   cd ../build-release
   cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DOpenGL_GL_PREFERENCE=GLVND \
      ../
   make -j7 install

LibTiff 4.0.9

Download LibTiff 4.0.9

In terminal, go to the folder in which you downloaded the source and run the following:

   unzip tiff-4.0.9.zip
   cd tiff-4.0.9
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DOpenGL_GL_PREFERENCE=GLVND \
      ../
   make -j7 install
   cd ../build-release
   cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DOpenGL_GL_PREFERENCE=GLVND \
      ../
   make -j7 install

GDAL 2.2.4

Download GDAL 2.2.4

In terminal, go to the folder in which you downloaded the source and run the following:

   tar -zxvf gdal-2.2.4.tar.gz
   cd gdal-2.2.4
   ./configure --prefix=$TR_ROOT/Ext
   make -j7
   make install

FreeType 2.9.1

Download FreeType 2.9.1

In terminal, go to the folder in which you downloaded the source and run the following:

   tar -zxvf freetype-2.9.1.tar.gz
   cd freetype-2.9.1
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DCMAKE_C_FLAGS=-fPIC \
      -DPNG_LIBRARY_DEBUG=$TR_ROOT/Ext/lib64/libpng16d.so \
      -DPNG_LIBRARY_RELEASE=$TR_ROOT/Ext/lib64/libpng16.so \
      -DPNG_PNG_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DZLIB_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DZLIB_LIBRARY_DEBUG=$TR_ROOT/Ext/lib/libzd.so \
      -DZLIB_LIBRARY_RELEASE=$TR_ROOT/Ext/lib/libz.so \
      ../
   make -j7 install
   cd ../build-release
   cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DCMAKE_C_FLAGS=-fPIC \
      -DPNG_LIBRARY_DEBUG=$TR_ROOT/Ext/lib64/libpng16d.so \
      -DPNG_LIBRARY_RELEASE=$TR_ROOT/Ext/lib64/libpng16.so \
      -DPNG_PNG_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DZLIB_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DZLIB_LIBRARY_DEBUG=$TR_ROOT/Ext/lib/libzd.so \
      -DZLIB_LIBRARY_RELEASE=$TR_ROOT/Ext/lib/libz.so \
      ../
   make -j7 install

Open Scene Graph 3.6.3

Download Open Scene Graph 3.6.3

In terminal, go to the folder in which you downloaded the source and run the following:

   unzip OpenSceneGraph-OpenSceneGraph-3.6.3.zip
   cd OpenSceneGraph-OpenSceneGraph-3.6.3
   mkdir {build-release,build-debug}
   cd build-debug
   cmake \
      -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_DEBUG_POSTFIX=d \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DFREETYPE_INCLUDE_DIR_freetype2=$TR_ROOT/Ext/include \
      -DFREETYPE_INCLUDE_DIR_ft2build=$TR_ROOT/Ext/include/freetype2 \
      -DFREETYPE_LIBRARY_DEBUG=$TR_ROOT/Ext/lib64/libfreetyped.a \
      -DFREETYPE_LIBRARY_RELEASE=$TR_ROOT/Ext/lib64/libfreetype.a \
      -DOpenGL_GL_PREFERENCE=LEGACY \
      -DOSG_GL3_AVAILABLE=ON \
      -DOSG_USE_FLOAT_BOUNDINGBOX=OFF \
      -DOSG_USE_FLOAT_BOUNDINGSPHERE=OFF \
      -DPNG_LIBRARY_DEBUG=$TR_ROOT/Ext/lib64/libpng16d.so \
      -DPNG_LIBRARY_RELEASE=$TR_ROOT/Ext/lib64/libpng16.so \
      -DPNG_PNG_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DTIFF_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DTIFF_LIBRARY_DEBUG=$TR_ROOT/Ext/lib64/libtiffd.so \
      -DTIFF_LIBRARY_RELEASE=$TR_ROOT/Ext/lib64/libtiff.so \
      -DZLIB_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DZLIB_LIBRARY_DEBUG=$TR_ROOT/Ext/lib/libzd.so \
      -DZLIB_LIBRARY_RELEASE=$TR_ROOT/Ext/lib/libz.so \
      ../
   make -j7 install
   cd ../build-release
   cmake \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=$TR_ROOT/Ext \
      -DFREETYPE_INCLUDE_DIR_freetype2=$TR_ROOT/Ext/include \
      -DFREETYPE_INCLUDE_DIR_ft2build=$TR_ROOT/Ext/include/freetype2 \
      -DFREETYPE_LIBRARY_DEBUG=$TR_ROOT/Ext/lib64/libfreetyped.a \
      -DFREETYPE_LIBRARY_RELEASE=$TR_ROOT/Ext/lib64/libfreetype.a \
      -DOpenGL_GL_PREFERENCE=LEGACY \
      -DOSG_GL3_AVAILABLE=ON \
      -DOSG_USE_FLOAT_BOUNDINGBOX=OFF \
      -DOSG_USE_FLOAT_BOUNDINGSPHERE=OFF \
      -DPNG_LIBRARY_DEBUG=$TR_ROOT/Ext/lib64/libpng16d.so \
      -DPNG_LIBRARY_RELEASE=$TR_ROOT/Ext/lib64/libpng16.so \
      -DPNG_PNG_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DTIFF_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DTIFF_LIBRARY_DEBUG=$TR_ROOT/Ext/lib64/libtiffd.so \
      -DTIFF_LIBRARY_RELEASE=$TR_ROOT/Ext/lib64/libtiff.so \
      -DZLIB_INCLUDE_DIR=$TR_ROOT/Ext/include \
      -DZLIB_LIBRARY_DEBUG=$TR_ROOT/Ext/lib/libzd.so \
      -DZLIB_LIBRARY_RELEASE=$TR_ROOT/Ext/lib/libz.so \
      ../
   make -j7 install