Skip to content
/ sally Public

A model checker for infinite-state systems.

License

GPL-2.0, Unknown licenses found

Licenses found

GPL-2.0
LICENSE
Unknown
COPYING
Notifications You must be signed in to change notification settings

SRI-CSL/sally

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Build Status Coverage Status Coverity Scan Build Status

Sally

Sally is a model checker for infinite state systems described as transition systems. It is research software under development so the features and the input language may change rapidly.

Prerequisites

In order to compile Sally you will need a reasonable c++ compiler such as g++ or clang, the cmake build system, the GMP library, some boost libraries, and a working Java runtime (for parser generation). On Ubuntu-like systems, the following should cover it:

sudo apt-get install g++
sudo apt-get install cmake
sudo apt-get install libgmp-dev
sudo apt-get install libboost-program-options-dev libboost-iostreams-dev libboost-test-dev libboost-thread-dev libboost-system-dev
sudo apt-get install default-jre

In addition, Sally needs an SMT solver for reasoning about the systems. It currently supports Yices2, MathSAT5, and OpenSMT2. Optionally, Sally can also use dReal.

For best results, we recommend using Yices2 and at least one of MathSAT5 or OpenSMT2 (or both).

How to Compile

You can configure and build Sally with:

cd build
cmake ..
make
make check

The cmake command will search for the necessary libraries and for the backend SMT solvers installed on your system.

For convenience, you can take a look at the at the following scripts to install some common SMT solvers:

If a solver is installed in a non-standard location, and cmake does not find it, you can give extra options. For example, if MathSAT5 is installed in the $MD directory, meaning that there are $MD/include and $MD/lib directories with MathSAT5 headers and libraries, then configure and build with

cd build
cmake .. -DMATHSAT5_HOME=$MD
make
make check

You can also set YICES2_HOME, OPENSMT2_HOME, or DREAL_HOME.

To compile Sally in debug mode, build with

cd build
cmake .. -DCMAKE_BUILD_TYPE=Debug
make
make check

In order to use the non-linear capabilities of Yices2 in Sally, you must use a version of Yices2 compiled with MCSAT support, and LibPoly must be installed on your system. As above, you can pass -DLIBPOLY_HOME=$LPD to cmake if LibPoly is installed in a non-standard location.

Input Language

Sally takes as input a simple description of transition systems based on the SMT2 language. A transition system consists of a description of the state type, a formula describing the initial states of the system, and a formula describing the transitions from the current to the next state of the system.

State Types

State type is a list of variables that are part of the state, together with their types.

;; A definition of a state type called "my_state_type" with variables
;; x and y of type Real.
(define-state-type my_state_type
  ((x Real) (y Real))
)

Sometimes it is useful to model systems that take inputs that are not part of the system state. Such inputs can be defined by using the more general form of state type definition.

;; State type with inputs
(define-state-type state_type_with_inputs
  ((x Real) (y Real))
  ((d Real))
)

Above, the variable d is such an input. These input variables can only be referenced in transition formulas, by using the input namespace.

With a defined state type, we can define sets of states and transitions over the state type.

State Formulas

We can describe a set of states with a state formula over the state type. A state formula is a first-order formula over the variables of the state type, written in SMT2 format.

;; Definition of a set of states "x_is_zero" capturing all states
;; over the state type "my_state_type" where x is 0.
(define-states x_is_zero my_state_type
  (= x 0)
)

Once a state formula has been defined it can be reused in other state formulas over the same state type.

;; A definition of a set of states "initial_states" over
;; "my_state_type" by a state formula. These are all states where
;; both x and y are 0.
(define-states initial_states my_state_type
  (and x_is_zero (= y 0))
)

State Transitions

We can describe allowed state transitions by a first-order formula over the current (state) and next variables of the state type. We use the prefix state to denote current variables, and the prefix next to denote the variables in the next state. Previously defined state formulas over the same state type can be used as if they were variables (state or next). Similarly, previously defined transitions over the same type can be used directly.

;; Definition of a transition where the next value of x is the
;; current value + 1.
(define-transition inc_x my_state_type
  (= next.x (+ state.x 1))
)

;; Definition of a transition that increases both x and y
(define-transition inc_x_and_y my_state_type
  (and inc_x (= next.y (+ state.y 1)))
)

;; Definition of a transition that increases x and y if not
;; exceeding 100, or goes back to the state with x = y = 0
(define-transition transition my_state_type
  (or
    (and (< state.x 100) inc_x_and_y)
    next.initial_states
  )
)

Transition Systems

We can define a state transition system by defining the state type, the initial states of the system and the transitions that the system can make.

;; Directly define a simple counter system that increases x and y
(define-transition-system T1 my_state_type
  ;; Initial states
  (and (= x 0) (= y 0))
  ;; Transition
  (and (= next.x (+ state.x 1)) (= next.y (+ state.y 1)))
)

;; Define the counter system that can reset to 0 by reusing defined
;; formulas
(define-transition-system T2 my_state_type
   ;; Initial states
   initial_states
   ;; Transitions
   transition
)

;; Transition system with inputs
(define-transition-system T3 state_type_with_inputs
  (and (= x 0) (= y 0))
  (and (= next.x (+ state.x input.d))
   (= next.y (+ state.y input.d))
  )
)

Adding assumptions

Additional constraints can be added to the transition system after it has been defined.

To add a state formula as an additional assumption of the system (it holds at initial states, it holds before and after every transition), we can use the assume command.

;; Add assumptions on the system
(assume T3
  (and (<= x 100) (<= y 100))
)

To add an assumption on the input values of the system, we can use the assume-input command.

;; Add assumption on the input space
(assume-input T3
  (>= d 0)
)

Queries

A query asks whether a state property is invariant for the given transition system (i.e., whether the state property is true in all reachable states). For example, in the system T1, it is clear that we the variables x and y will always be equal and non-negative. We can check these with the following queries.

;; Check whether x = y in T1
(query T1 (= x y))

;; Check whether x, y >= 0
(query T1 (and (>= x 0) (>= y 0)))

In the system T2, it should hold that both x and y will never exceed 20.

;; Check whether x, y <= 20
(query T2 (and (<= x 20) (<= y 20)))

;; Check whether x, y <= 19
(query T2 (and (<= x 19) (<= y 19)))

In the system T3, the variables x and y should always be equal.

;; Check whether we're always the same
(query T3 (= x y))

The full example above is available in examples/example.mcmt.

Usage

To see the full set of options, run sally -h. Some typical examples are as follows

  • Checking the properties with the bounded model-checking (BMC) engine
> sally --engine bmc examples/example.mcmt
unknown
unknown
unknown
unknown
unknown
  • Checking the property with BMC with a bigger bound and showing any counter-example traces
> sally --engine bmc --bmc-max 20 --show-trace examples/example.mcmt
unknown
unknown
unknown
invalid
(trace
  (state (x 0) (y 0))
  (state (x 1) (y 1))
  ...
  (state (x 20) (y 20))
)
unknown
  • Checking the properties with the k-induction engine
> sally --engine kind examples/example.mcmt
valid
valid
unknown
unknown
valid
> sally --engine kind --kind-max 20 examples/example.mcmt
valid
valid
unknown
invalid
valid
  • Checking the properties with the pdkind engine using the combination of yices2 and MathSAT5 as the reasoning engine
> sally --engine pdkind --solver y2m5 examples/example.mcmt
valid
valid
valid
invalid
valid
  • Checking nonlinear properties with Yices2

By relying on Yices2 with support for MCSAT, you can use Sally to reason about (polynomial) non-linear systems using BMC and k-induction. The following example models two systems computing sums S1 = 1 + 2 + ... + n and S2 = 1^2 + 2^2 + ... + n^2, and asks whether S1 = n*(n+1)/2 and S2 = n*(n+1)*(2n+1)/6.

;; Maintain Sum and n
(define-state-type ST ((Sum Real) (n Real)))
;; Initial states: Sum = 0, n = 0
(define-states Init ST (and (= Sum 0) (= n 0)))

;; Transition: Sum += n; n ++;
(define-transition Trans1 ST (and
  (= next.Sum (+ state.Sum state.n))
  (= next.n (+ state.n 1))
))

;; Transition system: Sum = 1 + 2 + ... + (n-1)
(define-transition-system T1 ST Init Trans1)
;; Sum = n*(n-1)/2
(query T1 (= Sum (/ (* n (- n 1)) 2)))

;; Transition: Sum += n^2; n ++;
(define-transition Trans2 ST (and
    (= next.Sum (+ state.Sum (* state.n state.n)))
    (= next.n (+ state.n 1))
))

;; Transition system: Sum = 1^2 + 2^2 + ... + (n-1)^2
(define-transition-system T2 ST Init Trans2)
;; Sum = n*(n-1)/2
(query T2 (= Sum (/ (* n (- n 1) (- (* 2 n) 1)) 6)))

We can prove these two properties with Sally by using Yices2 with MCSAT as follows

> sally --engine kind ../examples/example-nra.mcmt
valid
valid

Acknowledgments

Sally's development has been funded by the National Science Foundation, the National Aeronautics and Space Administration, and the Defense Advanced Research Projects Agency.