Send a TCP Syn packet to the destination on the defined port, if the port is open, use an nmap scan to check the service running on the port and prints all the ports found.
Uses as a base the router's ip to map all possible ips. It then sends an ICMP packet to each IP, and waits for a response, if it receives any response saved in an array the IP of the online host, and when it finishes checking all hosts, prints all hosts online.
Sends an ICMP packet to the destination and waits for a response. Then, extracts the TTL from the destination response and checks the possible OS in a list, if have founded, prints it.
- Windows ✔️
- Linux ✔️
- Mac ❓
Clone this repository
git clone https://github.com/ReddyyZ/astsu.git
- Install python 3.
- Linux
apt-get install python3
chmod +x *
python3 -m pip install -r requirements.txt
python3 install.py
- Done!
- Windows
- Python 3, download and install
python3 -m pip install -r requirements.txt
python3 install.py
- Done!
- Linux
- -sC | Scan common ports
- -p | Protocol to use in the scan
- -i | Interface to use
- -t | Timeout to each request
- -st | Use stealth scan method (TCP)
- -sA | Scan all ports
- -p | Protocol to use in the scan
- -i | Interface to use
- -t | Timeout to each request
- -st | Use stealth scan method (TCP)
- -sP | Scan a range ports
- -p | Protocol to use in the scan
- -i | Interface to use
- -t | Timeout to each request
- -st | Use stealth scan method (TCP)
- -sO | Scan OS of a target
- -d | Discover hosts in the network
- -p | Protocol to use in the scan
- -i | Interface to use
- Discover hosts
astsu -d
- Scan common ports using SYN Scan
astsu -sC -st 192.168.1.1
- Scan a range of ports
astsu 192.168.1.1 -sP 1 443
- Scan OS
astsu -sO 192.168.1.1
This project is under the MIT License.