Add P8 smartwatch configuration

.vscode/launch-nrf52-pi.json

@@ -13,8 +13,8 @@
             //  Application Executable to be flashed before debugging.  Note that the Application ELF image does not contain a valid Image Header, so we must install the Stub Bootloader.
             "executable": "bin/targets/nrf52_my_sensor/app/apps/my_sensor_app/my_sensor_app.elf",
             //  Uncomment one of these lines to debug MCUBoot or Stub Bootloader:
-            //  "executable": "bin/targets/nrf52_boot/app/boot/mynewt/mynewt.elf",
-            //  "executable": "bin/targets/nrf52_boot/app/apps/boot_stub/boot_stub.elf",
+            //  "executable": "bin/targets/pinetime/app/boot/mynewt/mynewt.elf",
+            //  "executable": "bin/targets/pinetime/app/apps/boot_stub/boot_stub.elf",
             "device": "nRF52832",
             //  Arm System View Description, from apache-mynewt-core/hw/mcu/nordic/src/ext/nrfx/mdk
             "svdFile": "scripts/nrf52/nrf52.svd",

.vscode/launch-nrf52.json

@@ -13,8 +13,8 @@
             //  Application Executable to be flashed before debugging.  Note that the Application ELF image does not contain a valid Image Header, so we must install the Stub Bootloader.
             "executable": "bin/targets/nrf52_my_sensor/app/apps/my_sensor_app/my_sensor_app.elf",
             //  Uncomment one of these lines to debug MCUBoot or Stub Bootloader:
-            //  "executable": "bin/targets/nrf52_boot/app/boot/mynewt/mynewt.elf",
-            //  "executable": "bin/targets/nrf52_boot/app/apps/boot_stub/boot_stub.elf",
+            //  "executable": "bin/targets/pinetime/app/boot/mynewt/mynewt.elf",
+            //  "executable": "bin/targets/pinetime/app/apps/boot_stub/boot_stub.elf",
             "device": "nRF52832",
             //  Arm System View Description, from apache-mynewt-core/hw/mcu/nordic/src/ext/nrfx/mdk
             "svdFile": "scripts/nrf52/nrf52.svd",

.vscode/launch.json

@@ -13,8 +13,8 @@
             //  Application Executable to be flashed before debugging.  Note that the Application ELF image does not contain a valid Image Header, so we must install the Stub Bootloader.
             "executable": "bin/targets/nrf52_my_sensor/app/apps/my_sensor_app/my_sensor_app.elf",
             //  Uncomment one of these lines to debug MCUBoot or Stub Bootloader:
-            //  "executable": "bin/targets/nrf52_boot/app/boot/mynewt/mynewt.elf",
-            //  "executable": "bin/targets/nrf52_boot/app/apps/boot_stub/boot_stub.elf",
+            //  "executable": "bin/targets/pinetime/app/boot/mynewt/mynewt.elf",
+            //  "executable": "bin/targets/pinetime/app/apps/boot_stub/boot_stub.elf",
             "device": "nRF52832",
             //  Arm System View Description, from apache-mynewt-core/hw/mcu/nordic/src/ext/nrfx/mdk
             "svdFile": "scripts/nrf52/nrf52.svd",

README.md

@@ -70,7 +70,11 @@ The goal of this firmware is to provide a mean for the user to OTA a new firmwar
 - Clone the project and `cd` into it
 - Init and update submodules : `git submodule update --init --recursive`
 - Configure mynewt : `newt upgrade`
-- Build : `scripts/nrf52/build-boot.sh`. The firmware is generated in `bin/targets/nrf52_boot/app/@mcuboot/boot/mynewt/mynewt.elf` and the DFU file for the reloader : `reloader/build-pinetime/reloader-mcuboot.zip`
+- Build : `scripts/nrf52/build-boot.sh`. The firmware is generated in `bin/targets/pinetime/app/@mcuboot/boot/mynewt/mynewt.elf` and the DFU file for the reloader : `reloader/build-pinetime/reloader-mcuboot.zip`
+
+You can also build the firmware for the P8 watch, which has a slightly different pin mapping. The `build-boot.sh` accepts an optional argument (default: `pinetime`, options: `pinetime`, `p8`) to specify the target to build.
+
+- Build : `scripts/nrf52/build-boot.sh p8`. The firmware is generated in `bin/targets/p8/app/@mcuboot/boot/mynewt/mynewt.elf` and the DFU file for the reloader : `reloader/build-p8/reloader-mcuboot.zip`
 
 ## About the code
 

hw/bsp/nrf52/syscfg.yml

@@ -54,16 +54,18 @@ syscfg.vals:
 
     ###########################################################################
     # SPI Flash
-    # XTX XT25F32B 32 Mb (4 MB) SPI NOR Flash (similar to QuadSPI SPI NOR Flash like Macronix 32 Mb (4 MB) MX25L3233F)
-    # manufacturer (0x0b), device (0x15), memory type (0x40), density (0x16)
     # Settings below are documented at https://github.com/apache/mynewt-core/blob/master/hw/drivers/flash/spiflash/syscfg.yml
 
     SPIFLASH:               1   # Enable SPI Flash
     SPIFLASH_SPI_NUM:       0   # SPI Interface 0
     SPIFLASH_SPI_CS_PIN:    5   # SPI interface CS pin: P0.05/AIN3, SPI-CE# (SPI-NOR)
     SPIFLASH_BAUDRATE:      8000    # Requested baudrate, 8000 is the fastest baudrate supported by nRF52832
+
     SPIFLASH_MANUFACTURER:  0x0B    # Expected SpiFlash manufacturer as read by Read JEDEC ID command 9FH
     SPIFLASH_MEMORY_TYPE:   0x40    # Expected SpiFlash memory type as read by Read JEDEC ID command 9FH
+    SPIFLASH_IGNORE_MANUFACTURER: 1 # Many P8 watches contain a whole zoo of different SPI flash chips across variants
+    SPIFLASH_IGNORE_MEMORY_TYPE:  1 # The chips still behave the same as the PineTime one.
+
     SPIFLASH_MEMORY_CAPACITY: 0x16  # Expected SpiFlash memory capactity as read by Read JEDEC ID command 9FH (2 ^ 0x16 = 32 Mb)
     SPIFLASH_SECTOR_COUNT:  1024    # Number of sectors: 1024 sectors of 4 KB each
     SPIFLASH_SECTOR_SIZE:   4096    # TODO Number of bytes that can be erased at a time: 4 KB sector size
@@ -92,7 +94,7 @@ syscfg.vals:
     COREDUMP_FLASH_AREA: FLASH_AREA_IMAGE_1
 
     MCU_DCDC_ENABLED: 1
-    MCU_LFCLK_SOURCE: LFXO
+    MCU_LFCLK_SOURCE: LFRC # Compatible with all variants, with or without external crystal
     BOOT_SERIAL_DETECT_PIN: 20
 
     ###########################################################################

libs/pinetime_boot/pkg.yml

@@ -33,7 +33,7 @@ pkg.deps:
 # Mynewt consolidates the initialisation functions into sysinit()
 # and calls them according to the Stage number, highest number first.
 # Stage 500 is used by Sensor Creator so we use Stage 600 onwards.
-# Generated sysinit() for Bootloader: bin/targets/nrf52_boot/generated/src/nrf52_boot-sysinit-app.c
+# Generated sysinit() for Bootloader: bin/targets/pinetime/generated/src/pinetime-sysinit-app.c
 
 pkg.init:
     # pinetime_boot should be initialised last, when SPI and Semihosting Console are up

libs/pinetime_boot/src/blink.c

@@ -21,8 +21,6 @@
 #include <os/mynewt.h>
 #include <hal/hal_gpio.h>
 
-#define PUSH_BUTTON_IN  13  //  GPIO Pin P0.13: PUSH BUTTON_IN
-
 /// GPIO settings for the backlight: LCD_BACKLIGHT_{LOW,MID,HIGH} (P0.14, 22, 23)
 static const uint8_t backlights[] = {    
     14,  //  Low Backlight
@@ -130,6 +128,6 @@ static void delay_ms(uint32_t ms) {
     uint8_t button_samples = 0;
     for (int i = 0; i < ms; i++) {
         for (int delay = 0; delay < 100000; delay++) {}
-        button_samples += hal_gpio_read(PUSH_BUTTON_IN);
+        button_samples += hal_gpio_read(MYNEWT_VAL(PUSH_BUTTON_IN));
     }
 }

libs/pinetime_boot/src/display.c

@@ -37,7 +37,6 @@
 #define DISPLAY_RST  26  //  LCD_RESET (P0.26): Display reset
 #define DISPLAY_HIGH 23  //  LCD_BACKLIGHT_{LOW,MID,HIGH} (P0.14, 22, 23): Backlight (active low)
 #define BATCH_SIZE  256  //  Max number of SPI data bytes to be transmitted
-#define PUSH_BUTTON_IN  13  //  GPIO Pin P0.13: PUSH BUTTON_IN
 
 //  Screen Size
 #define ROW_COUNT 240

libs/pinetime_boot/src/pinetime_boot.c

@@ -32,9 +32,6 @@
 #include <hal/hal_watchdog.h>
 #include "pinetime_boot/version.h"
 
-#define PUSH_BUTTON_IN  13  //  GPIO Pin P0.13: PUSH BUTTON_IN
-#define PUSH_BUTTON_OUT 15  //  GPIO Pin P0.15/TRACEDATA2: PUSH BUTTON_OUT
-
 /// Vector Table will be relocated here.
 #define RELOCATED_VECTOR_TABLE 0x7F00
 
@@ -54,9 +51,9 @@ void pinetime_boot_init(void) {
 
     //  Init the push button. The button on the side of the PineTime is disabled by default. To enable it, drive the button out pin (P0.15) high.
     //  While enabled, the button in pin (P0.13) will be high when the button is pressed, and low when it is not pressed. 
-    hal_gpio_init_in(PUSH_BUTTON_IN, HAL_GPIO_PULL_DOWN);
-    hal_gpio_init_out(PUSH_BUTTON_OUT, 1);
-    hal_gpio_write(PUSH_BUTTON_OUT, 1);  //  Enable the button
+    hal_gpio_init_in(MYNEWT_VAL(PUSH_BUTTON_IN), HAL_GPIO_PULL_DOWN);
+    hal_gpio_init_out(MYNEWT_VAL(PUSH_BUTTON_OUT), 1);
+    hal_gpio_write(MYNEWT_VAL(PUSH_BUTTON_OUT), 1);  //  Enable the button
     //  blink_backlight(1, 1);
 
     //  Display the image.
@@ -70,7 +67,7 @@ void pinetime_boot_init(void) {
     console_printf("Waiting 5 seconds for button...\n");  console_flush();
     for (int i = 0; i < 64 * 5; i++) {
         for (int delay = 0; delay < 3000; delay++) {
-            button_samples += hal_gpio_read(PUSH_BUTTON_IN);
+            button_samples += hal_gpio_read(MYNEWT_VAL(PUSH_BUTTON_IN));
         }
         if(i % 64 == 0) {
           console_printf("step %d - %d\n", (i / (64)) + 1, (int)button_samples); console_flush();

libs/pinetime_boot/syscfg.yml

@@ -3,3 +3,12 @@
 #   Strings must be enclosed by '"..."'
 
 syscfg.defs:
+  PUSH_BUTTON_IN:
+      description: Pin of the pushbutton (in)
+      value: 
+      restrictions: $notnull
+
+  PUSH_BUTTON_OUT:
+      description: Pin of the pushbutton (out)
+      value: 
+      restrictions: $notnull

project.yml

@@ -17,7 +17,7 @@
 # under the License.
 #
 
-project.name: "my_project"
+project.name: "pinetime_mcuboot_bootloader"
 
 project.repositories:
     - apache-mynewt-core
@@ -28,12 +28,12 @@ project.repositories:
 #
 repository.apache-mynewt-core:
     type: github
-    vers: 1.8.0
+    vers: db05f05fedadc7782e6b857400779b8af69eb857-commit # Contains JEDEC ignore options
     user: apache
     repo: mynewt-core
 
 repository.mcuboot:
     type: github
-    vers: 1.5.0
-    user: JuulLabs-OSS
+    vers: c657cbea75f2bb1faf1fceacf972a0537a8d26dd-commit # 1.9.0
+    user: mcu-tools
     repo: mcuboot

scripts/nrf52/build-boot.cmd

@@ -1,7 +1,7 @@
 ::  Build Mynewt bootloader on Windows
 
 ::  Build the bootloader.
-newt\newt.exe build nrf52_boot
+newt\newt.exe build pinetime
 
 ::  Show the size.
-newt\newt.exe size -v nrf52_boot
+newt\newt.exe size -v pinetime

scripts/nrf52/build-boot.sh

@@ -1,6 +1,9 @@
 #!/usr/bin/env bash
 #  Build Mynewt bootloader on macOS and Linux
 
+TARGET=${1:-pinetime}
+echo "Building target $TARGET"
+
 set -e  #  Exit when any command fails.
 set -x  #  Echo all commands.
 
@@ -10,17 +13,17 @@ source paths.bash
 arm-none-eabi-gcc --version
 
 #  Build the bootloader.
-newt build nrf52_boot
+newt build $TARGET
 
 #  Show the size.
-newt size -v nrf52_boot
+newt size -v $TARGET
 
-arm-none-eabi-objcopy -I binary -O ihex bin/targets/nrf52_boot/app/@mcuboot/boot/mynewt/mynewt.elf.bin bin/targets/nrf52_boot/app/@mcuboot/boot/mynewt/mynewt.elf.hex
-scripts/hex2c.py bin/targets/nrf52_boot/app/@mcuboot/boot/mynewt/mynewt.elf.hex > reloader/src/boards/pinetime/bootloader.h
-make -C reloader BOARD=pinetime
+arm-none-eabi-objcopy -I binary -O ihex bin/targets/$TARGET/app/@mcuboot/boot/mynewt/mynewt.elf.bin bin/targets/$TARGET/app/@mcuboot/boot/mynewt/mynewt.elf.hex
+scripts/hex2c.py bin/targets/$TARGET/app/@mcuboot/boot/mynewt/mynewt.elf.hex > reloader/src/boards/$TARGET/bootloader.h
+make -C reloader build-$TARGET/reloader-mcuboot.zip all BOARD=$TARGET
 
 set +x
-echo "Bootloader firmware (elf) : bin/targets/nrf52_boot/app/@mcuboot/boot/mynewt/mynewt.elf"
-echo "Bootloader firmware (bin) : bin/targets/nrf52_boot/app/@mcuboot/boot/mynewt/mynewt.bin"
-echo "Bootloader firmware (hex) : bin/targets/nrf52_boot/app/@mcuboot/boot/mynewt/mynewt.hex"
-echo "Reloader (DFU) : reloader/build-pinetime/reloader-mcuboot.zip"
+echo "Bootloader firmware (elf) : bin/targets/$TARGET/app/@mcuboot/boot/mynewt/mynewt.elf"
+echo "Bootloader firmware (bin) : bin/targets/$TARGET/app/@mcuboot/boot/mynewt/mynewt.bin"
+echo "Bootloader firmware (hex) : bin/targets/$TARGET/app/@mcuboot/boot/mynewt/mynewt.hex"
+echo "Reloader (DFU) : reloader/build-$TARGET/reloader-mcuboot.zip"

targets/p8/pkg.yml

@@ -0,0 +1,35 @@
+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+
+# Target Settings
+pkg.name:         targets/p8
+pkg.type:         target
+pkg.description: 
+pkg.author: 
+pkg.homepage: 
+
+# Package Dependencies: MCUBoot is dependent on these drivers and libraries.
+pkg.deps:
+    - "libs/semihosting_console"  #  Semihosting Console
+    - "libs/pinetime_boot"        #  Render boot graphic and check for rollback. Comment out for Stub Bootloader.
+
+#  C compiler flags
+pkg.cflags:
+    - -DMCUBOOT_HAVE_LOGGING=1  #  So that sysinit() will be run, needed for displaying boot graphic
+    - -DDISABLE_SEMIHOSTING     #  Uncomment to disable Arm Semihosting. Must be uncommented for production.
+    # - -Os  #  Optimise for smallest size

targets/nrf52_boot/syscfg.yml → targets/p8/syscfg.yml

@@ -15,7 +15,7 @@
 # specific language governing permissions and limitations
 # under the License.
 
-# MCUBoot Bootloader Settings
+# Target Settings
 
 syscfg.vals:
     BOOT_CUSTOM_START:        1  # Use custom boot function boot_custom_start()
@@ -54,3 +54,7 @@ syscfg.vals:
     SANITY_INTERVAL:          1000  # The interval (in milliseconds) at which the sanity checks should run, should be at least 200ms prior to watchdog
     WATCHDOG_INTERVAL:        2000  # The interval (in milliseconds) at which the watchdog should reset if not tickled, in ms
 
+    # Specific target hardware config
+
+    PUSH_BUTTON_IN:     17
+    PUSH_BUTTON_OUT:    -1 

targets/nrf52_boot/pkg.yml → targets/pinetime/pkg.yml

@@ -16,8 +16,8 @@
 # specific language governing permissions and limitations
 # under the License.
 
-# MCUBoot Package Settings
-pkg.name:         targets/nrf52_boot
+# Target Settings
+pkg.name:         targets/pinetime
 pkg.type:         target
 pkg.description: 
 pkg.author: 

targets/pinetime/syscfg.yml

@@ -0,0 +1,60 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+
+# Target Settings
+
+syscfg.vals:
+    BOOT_CUSTOM_START:        1  # Use custom boot function boot_custom_start()
+    OS_MAIN_STACK_SIZE:    1024  # Small stack size: 4 KB
+    MSYS_1_BLOCK_COUNT:      64  # Allocate MSYS buffers for Semihosting Console
+    HAL_ENABLE_SOFTWARE_BREAKPOINTS: 0 # In case of assertion failure, don't breakpoint. Must be set to 0 so that bootloader will reboot and won't hang in case of assertion failures.
+    MCU_DEBUG_IGNORE_BKPT: 1
+
+    ###########################################################################
+    # Hardware Settings
+
+    SPIFLASH:                 1  # Enable SPI Flash
+    SPI_0_MASTER:             1  # Enable SPI port 0 for ST7789 display and SPI Flash
+    I2C_1:                    0  # Disable I2C port 1 for CST816S touch controller, BMA421 accelerometer, HRS3300 heart rate sensor
+    UART_0:                   0  # Disable UART port to reduce ROM size
+
+    ###########################################################################
+    # Common Settings for minimal ROM size
+
+    CONSOLE_COMPAT:           0  # Disable console input
+    CONSOLE_RTT:              0  # Disable RTT Console
+    CONSOLE_UART:             0  # Disable UART Console
+    LOG_CLI:                  0  # Disable logging command-line interface
+    LOG_LEVEL:              255  # Disable logs
+    SENSOR_CLI:               0  # Disable sensor command-line interface
+    SENSOR_OIC:               0  # Disable sensor OIC functions
+    SHELL_CMD_HELP:           0  # Disable shell help
+    SHELL_OS_MODULE:          0  # Disable shell module
+    SHELL_TASK:               0  # Disable shell task
+    STATS_CLI:                0  # Disable statistics command-line interface
+    OS_SYSVIEW_TRACE_CALLOUT: 0  # Disable trace of callouts
+    OS_SYSVIEW_TRACE_EVENTQ:  0  # Disable trace of event queues
+    OS_SYSVIEW_TRACE_MUTEX:   0  # Disable trace of mutex
+    OS_SYSVIEW_TRACE_SEM:     0  # Disable trace of semaphores
+    BOOTUTIL_FEED_WATCHDOG:   1  # Enable watchdog feeding while performing a swap upgrade
+    SANITY_INTERVAL:          1000  # The interval (in milliseconds) at which the sanity checks should run, should be at least 200ms prior to watchdog
+    WATCHDOG_INTERVAL:        2000  # The interval (in milliseconds) at which the watchdog should reset if not tickled, in ms
+
+    # Specific target hardware config
+
+    PUSH_BUTTON_IN:     13
+    PUSH_BUTTON_OUT:    15 

targets/pinetime/target.yml

@@ -0,0 +1,12 @@
+# Bootloader Target Settings
+
+# Bootloader will be based on MCUBoot. Select "apps/boot_stub" for the Stub Bootloader.
+target.app:           "@mcuboot/boot/mynewt"  # Use MCUBoot, which doesn't support debugging
+# target.app:         "apps/boot_stub"  # Use Stub Bootloader, which supports debugging
+
+# Board Support Package (BSP) for the target
+target.bsp:           "hw/bsp/nrf52"
+
+# Build with debug support. Or select "optimized" to remove debug support.
+#target.build_profile: debug        # For debugging
+target.build_profile: optimized  # For production