update to v1.14

.devcontainer/Dockerfile

@@ -11,6 +11,7 @@ RUN apt-get update -qq \
       make \
       python3 \
       python3-pip \
+      python3-pil \
       tar \
       unzip \
       wget \ 

.github/ISSUE_TEMPLATE/bug-report.yaml

@@ -7,7 +7,7 @@ body:
       label: Verification
       description: Before submitting a bug report, check if similar issues already exist and use those issues to provide your feedback instead.
       options:
-      - label: I searched for similar bug reports and found none was relevant.
+      - label: I searched for similar bug reports (including closed issues) and found none was relevant.
         required: true
   - type: input
     id: desc-brief

.github/ISSUE_TEMPLATE/issue-report.yaml

@@ -6,7 +6,7 @@ body:
     label: Verification
     description: Before submitting an issue, check if similar issues already exist and use those issues to provide your feedback instead.
     options:
-      - label: I searched for similar issues and found none was relevant.
+      - label: I searched for similar issues (including closed issues) and found none was relevant.
         required: true
 - type: textarea
   attributes:

.github/workflows/main.yml

@@ -31,6 +31,10 @@ jobs:
         uses: actions/checkout@v3
         with:
           submodules: recursive
+      - name: Install resource build dependencies
+        run:  |
+          apt-get update
+          apt-get -y install --no-install-recommends python3-pil
       - name: Build
         shell: bash
         run: /opt/build.sh all
@@ -61,10 +65,10 @@ jobs:
   build-simulator:
     runs-on: ubuntu-22.04
     steps:
-    - name: Install SDL2 development package
+    - name: Install SDL2 and libpng development package
       run:  |
         sudo apt-get update
-        sudo apt-get -y install libsdl2-dev
+        sudo apt-get -y install libsdl2-dev libpng-dev
 
     - name: Install Ninja
       run:  |
@@ -82,7 +86,7 @@ jobs:
     - name: Get InfiniSim repo
       run:  |
         git clone https://github.com/InfiniTimeOrg/InfiniSim.git --depth 1 --branch main
-        git -C InfiniSim submodule update --init lv_drivers libpng
+        git -C InfiniSim submodule update --init lv_drivers
 
     - name: CMake
       # disable BUILD_RESOURCES as this is already done when building the firmware

.vscode/c_cpp_properties.json

@@ -10,7 +10,7 @@
             "defines": [],
             "compilerPath": "${env:ARM_NONE_EABI_TOOLCHAIN_PATH}/bin/arm-none-eabi-gcc",
             "cStandard": "c11",
-            "cppStandard": "c++14",
+            "cppStandard": "c++20",
             "intelliSenseMode": "linux-gcc-arm",
             "configurationProvider": "ms-vscode.cpp-tools",
             "compileCommands": "${workspaceFolder}/build/compile_commands.json"

CMakeLists.txt

@@ -2,18 +2,17 @@ cmake_minimum_required(VERSION 3.10)
 
 set(CMAKE_BUILD_TYPE Release CACHE STRING "Choose Debug or Release")
 
-project(pinetime VERSION 1.13.0 LANGUAGES C CXX ASM)
+project(pinetime VERSION 1.14.0 LANGUAGES C CXX ASM)
 
 set(CMAKE_C_STANDARD 99)
-set(CMAKE_CXX_STANDARD 14)
+set(CMAKE_CXX_STANDARD 20)
 
 # set(CMAKE_GENERATOR "Unix Makefiles")
 set(CMAKE_C_EXTENSIONS OFF)
 set(CMAKE_C_STANDARD_REQUIRED ON)
 set(CMAKE_CXX_EXTENSIONS OFF)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
-
 set(NRF_TARGET "nrf52")
 
 if (NOT ARM_NONE_EABI_TOOLCHAIN_PATH)
@@ -33,7 +32,7 @@ if(BUILD_RESOURCES)
 endif()
 
 set(TARGET_DEVICE "PINETIME" CACHE STRING "Target device")
-set_property(CACHE TARGET_DEVICE PROPERTY STRINGS PINETIME MOY-TFK5 MOY-TIN5 MOY-TON5 MOY-UNK)
+set_property(CACHE TARGET_DEVICE PROPERTY STRINGS PINETIME MOY_TFK5 MOY_TIN5 MOY_TON5 MOY_UNK)
 
 set(PROJECT_GIT_COMMIT_HASH "")
 
@@ -70,5 +69,4 @@ set(VERSION_EDIT_WARNING "// Do not edit this file, it is automatically generate
 configure_file(${CMAKE_CURRENT_SOURCE_DIR}/src/Version.h.in ${CMAKE_CURRENT_BINARY_DIR}/src/Version.h)
 configure_file(${CMAKE_CURRENT_SOURCE_DIR}/docker/post_build.sh.in ${CMAKE_CURRENT_BINARY_DIR}/post_build.sh)
 
-
 add_subdirectory(src)

README.md

@@ -17,11 +17,11 @@ Fast open-source firmware for the [PineTime smartwatch](https://www.pine64.org/p
 - [Gadgetbridge](https://gadgetbridge.org/) (Android)
 - [AmazFish](https://openrepos.net/content/piggz/amazfish/) (SailfishOS)
 - [Siglo](https://github.com/alexr4535/siglo) (Linux)
-- [InfiniLink](https://github.com/InfiniTimeOrg/InfiniLink) (iOS) **[Looking for a new maintainer]**
+- [InfiniLink](https://github.com/InfiniTimeOrg/InfiniLink) (iOS)
 - [ITD](https://gitea.elara.ws/Elara6331/itd) (Linux)
 - [WatchMate](https://github.com/azymohliad/watchmate) (Linux)
 
-***Note** : We removed mentions to NRFConnect as this app is closed source and recent versions do not work anymore with InfiniTime (the last version known to work is 4.24.3). If you used NRFConnect in the past, we recommend you switch to [Gadgetbridge](https://gadgetbridge.org/).*
+***Note**: We removed mentions to NRFConnect as this app is closed source and recent versions do not work anymore with InfiniTime (the last version known to work is 4.24.3). If you used NRFConnect in the past, we recommend you switch to [Gadgetbridge](https://gadgetbridge.org/).*
 
 ## Development
 
@@ -72,17 +72,17 @@ This project is released under the GNU General Public License version 3 or, at y
 
 It integrates the following projects:
 
-- RTOS : **[FreeRTOS](https://freertos.org)** under the MIT license
-- UI : **[LittleVGL/LVGL](https://lvgl.io/)** under the MIT license
-- BLE stack : **[NimBLE](https://github.com/apache/mynewt-nimble)** under the Apache 2.0 license
-- Font : **[Jetbrains Mono](https://www.jetbrains.com/fr-fr/lp/mono/)** under the Apache 2.0 license
+- RTOS: **[FreeRTOS](https://freertos.org)** under the MIT license
+- UI: **[LittleVGL/LVGL](https://lvgl.io/)** under the MIT license
+- BLE stack: **[NimBLE](https://github.com/apache/mynewt-nimble)** under the Apache 2.0 license
+- Font: **[Jetbrains Mono](https://www.jetbrains.com/fr-fr/lp/mono/)** under the Apache 2.0 license
 
 ## Credits
 
-I’m not working alone on this project. First, many people create PR for this project. Then, there is the whole #pinetime community : a lot of people all around the world who are hacking, searching, experimenting and programming the Pinetime. We exchange our ideas, experiments and code in the chat rooms and forums.
+I’m not working alone on this project. First, many people create pull requests for this project. Then, there is the whole #pinetime community: a lot of people all around the world who are hacking, searching, experimenting and programming the Pinetime. We exchange our ideas, experiments and code in the chat rooms and forums.
 
 Here are some people I would like to highlight:
 
-- [Atc1441](https://github.com/atc1441/) : He works on an Arduino based firmware for the Pinetime and many other smartwatches based on similar hardware. He was of great help when I was implementing support for the BMA421 motion sensor and I²C driver.
-- [Koen](https://github.com/bosmoment) : He’s working on a firmware based on RiotOS. He integrated similar libs as me : NimBLE, LittleVGL,… His help was invaluable too!
-- [Lup Yuen Lee](https://github.com/lupyuen) : He is everywhere: he works on a Rust firmware, builds a MCUBoot based bootloader for the Pinetime, designs a Flutter based companion app for smartphones and writes a lot of articles about the Pinetime!
+- [Atc1441](https://github.com/atc1441/): He works on an Arduino based firmware for the Pinetime and many other smartwatches based on similar hardware. He was of great help when I was implementing support for the BMA421 motion sensor and I²C driver.
+- [Koen](https://github.com/bosmoment): He’s working on a firmware based on RiotOS. He integrated similar libs as me: NimBLE, LittleVGL,… His help was invaluable too!
+- [Lup Yuen Lee](https://github.com/lupyuen): He is everywhere: he works on a Rust firmware, builds a MCUBoot based bootloader for the Pinetime, designs a Flutter based companion app for smartphones and writes a lot of articles about the Pinetime!

doc/SimpleWeatherService.md

@@ -0,0 +1,69 @@
+# Simple Weather Service
+
+## Introduction
+
+The Simple Weather Service provides a simple and straightforward API to specify the current weather and the forecast for the next 5 days.
+It effectively replaces the original Weather Service (from InfiniTime 1.8) since InfiniTime 1.14.
+
+## Service
+
+The service UUID is `00050000-78fc-48fe-8e23-433b3a1942d0`.
+
+## Characteristics
+
+## Weather data (UUID 00050001-78fc-48fe-8e23-433b3a1942d0)
+
+The host uses this characteristic to update the current weather information and the forecast for the next 5 days.
+
+This characteristics accepts a byte array with the following 2-Bytes header:
+
+ - [0] Message Type : 
+   - `0` : Current weather
+   - `1` : Forecast
+ - [1] Message Version : Version `0` is currently supported. Other versions might be added in future releases
+
+### Current Weather 
+
+The byte array must contain the following data:
+
+ - [0] : Message type = `0`
+ - [1] : Message version = `0`
+ - [2][3][4][5][6][7][8][9] : Timestamp (64 bits UNIX timestamp, number of seconds elapsed since 1 JAN 1970)  in local time (the same timezone as the one used to set the time)
+ - [10, 11] : Current temperature (°C * 100)
+ - [12, 13] : Minimum temperature (°C * 100)
+ - [14, 15] : Maximum temperature (°C * 100)
+ - [16]..[47] : location (string, unused characters should be set to `0`)
+ - [48] : icon ID 
+   - 0 = Sun, clear sky
+   - 1 = Few clouds
+   - 2 = Clouds
+   - 3 = Heavy clouds
+   - 4 = Clouds & rain
+   - 5 = Rain
+   - 6 = Thunderstorm
+   - 7 = Snow
+   - 8 = Mist, smog
+
+### Forecast
+
+The byte array must contain the following data:
+
+  - [0] : Message type = `1`
+  - [1] : Message version = `0`
+  - [2][3][4][5][6][7][8][9] : Timestamp (64 bits UNIX timestamp, number of seconds elapsed since 1 JAN 1970) in local time (the same timezone as the one used to set the time)
+  - [10] Number of days (Max 5, fields for unused days should be set to `0`)
+  - [11,12] Day 0 Minimum temperature (°C * 100)
+  - [13,14] Day 0 Maximum temperature (°C * 100)
+  - [15] Day 0 Icon ID
+  - [16,17] Day 1 Minimum temperature (°C * 100)
+  - [18,19] Day 1 Maximum temperature (°C * 100)
+  - [20] Day 1 Icon ID
+  - [21,22] Day 2 Minimum temperature (°C * 100)
+  - [23,24] Day 2 Maximum temperature (°C * 100)
+  - [25] Day 2 Icon ID
+  - [26,27] Day 3 Minimum temperature (°C * 100)
+  - [28,29] Day 3 Maximum temperature (°C * 100)
+  - [30] Day 3 Icon ID
+  - [31,32] Day 4 Minimum temperature (°C * 100)
+  - [33,34] Day 4 Maximum temperature (°C * 100)
+  - [35] Day 4 Icon ID

doc/ble.md

@@ -92,7 +92,10 @@ The following custom services are implemented in InfiniTime:
 
 - Since InfiniTime 1.8:
 
-  - [Weather Service](/src/components/ble/weather/WeatherService.h): `00040000-78fc-48fe-8e23-433b3a1942d0`
+  - ~~Weather Service: `00040000-78fc-48fe-8e23-433b3a1942d0`~~ (replaced by Simple Weather Service in InfiniTime 1.14)
+
+- Since InfiniTime 1.14
+  - [Simple Weather Service](SimpleWeatherService.md) : `00050000-78fc-48fe-8e23-433b3a1942d0`
 
 ---
 

doc/buildAndProgram.md

@@ -42,13 +42,23 @@ CMake configures the project according to variables you specify the command line
 **NRF5_SDK_PATH**|path to the NRF52 SDK|`-DNRF5_SDK_PATH=/home/jf/nrf52/Pinetime/sdk`|
 **CMAKE_BUILD_TYPE (\*)**| Build type (Release or Debug). Release is applied by default if this variable is not specified.|`-DCMAKE_BUILD_TYPE=Debug`
 **BUILD_DFU (\*\*)**|Build DFU files while building (needs [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil)).|`-DBUILD_DFU=1`
-**BUILD_RESOURCES (\*\*)**| Generate external resource while building (needs [lv_font_conv](https://github.com/lvgl/lv_font_conv) and [lv_img_conv](https://github.com/lvgl/lv_img_conv). |`-DBUILD_RESOURCES=1`
-**TARGET_DEVICE**|Target device, used for hardware configuration. Allowed: `PINETIME, MOY-TFK5, MOY-TIN5, MOY-TON5, MOY-UNK`|`-DTARGET_DEVICE=PINETIME` (Default)
+**BUILD_RESOURCES (\*\*)**| Generate external resource while building (needs [lv_font_conv](https://github.com/lvgl/lv_font_conv) and [python3-pil/pillow](https://pillow.readthedocs.io) module). |`-DBUILD_RESOURCES=1`
+**TARGET_DEVICE**|Target device, used for hardware configuration. Allowed: `PINETIME, MOY_TFK5, MOY_TIN5, MOY_TON5, MOY_UNK`|`-DTARGET_DEVICE=PINETIME` (Default)
 
 #### (\*) Note about **CMAKE_BUILD_TYPE**
 By default, this variable is set to *Release*. It compiles the code with size and speed optimizations. We use this value for all the binaries we publish when we [release](https://github.com/InfiniTimeOrg/InfiniTime/releases) new versions of InfiniTime.
 
-The *Debug* mode disables all optimizations, which makes the code easier to debug. However, the binary size will likely be too big to fit in the internal flash memory. If you want to build and debug a *Debug* binary, you'll need to disable some parts of the code. For example, the icons for the **Navigation** app use a lot of memory space. You can comment the content of `m_iconMap` in the [Navigation](https://github.com/InfiniTimeOrg/InfiniTime/blob/main/src/displayapp/screens/Navigation.h#L148) application to free some memory.
+The *Debug* mode disables all optimizations, which makes the code easier to debug. However, the binary size will likely be too big to fit in the internal flash memory. If you want to build and debug a *Debug* binary, you can disable some parts of the code that are not needed for the test you want to achieve. You can also apply the *Debug* mode selectively on parts of the application by applying the `DEBUG_FLAGS` only for the part (CMake target) you want to debug. For example, let's say you want to debug code related to LittleFS, simply set the compilation options for the RELEASE configuration of the target to `DEBUG_FLAGS` (in `src/CMakeLists.txt`). This will force the compilation of that target in *Debug* mode while the rest of the project will be built in *Release* mode. Example:
+
+```
+target_compile_options(littlefs PRIVATE
+        ${COMMON_FLAGS}
+        $<$<CONFIG:DEBUG>: ${DEBUG_FLAGS}>
+        $<$<CONFIG:RELEASE>: ${DEBUG_FLAGS}> # Change from RELEASE_FLAGS to DEBUG_FLAGS
+        $<$<COMPILE_LANGUAGE:CXX>: ${CXX_FLAGS}>
+        $<$<COMPILE_LANGUAGE:ASM>: ${ASM_FLAGS}>
+        )
+```
 
 #### (\*\*) Note about **BUILD_DFU**
 DFU files are the files you'll need to install your build of InfiniTime using OTA (over-the-air) mechanism. To generate the DFU file, the Python tool [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil) is needed on your system. Check that this tool is properly installed before enabling this option.
@@ -88,4 +98,4 @@ Binary files are generated into the folder `src`:
 - **pinetime-mcuboot-app-image** : MCUBoot image of the firmware
 - **pinetime-mcuboot-app-dfu** : DFU file of the firmware
 
-The same files are generated for **pinetime-recovery** and **pinetime-recoveryloader**
+The same files are generated for **pinetime-recovery** and **pinetime-recovery-loader**

doc/buildWithDocker.md

@@ -11,6 +11,16 @@ Based on Ubuntu 22.04 with the following build dependencies:
 - adafruit-nrfutil
 - lv_font_conv
 
+## Clone the repository
+
+Before building, local repository must be fully initialized.
+
+```
+git clone https://github.com/InfiniTimeOrg/InfiniTime.git
+cd InfiniTime
+git submodule update --init
+```
+
 ## Run a container to build the project
 
 The `infinitime-build` image contains all the dependencies you need.