ModusToolbox™ Software Training Level 2 – XMC7000 MCU

This is a 2nd level ModusToolbox™ training class. It covers XMC7000 MCUs.

The material and examples demonstrate the use of peripherals such as GPIO, PWM, ADC, UART, I2C, and SPI. Some examples use sensors from a separate shield board. The class also covers RTOS, DMA and how multicore applications work.

Pre-requisites

• ModusToolbox™ Software Training Level 1 - Getting Started

Organization

• Manual: This directory contains the manual chapters.
• Projects: This directory contains solutions to exercises.
• Templates: This directory contains starting template applications for some exercises.

Manual Chapters

This class consists of 5 chapters:

• Chapter 1: Introduction - Overall introduction to XMC7000.
• Chapter 2: Peripherals - Description of the PDL and HAL middleware, how to use them to interact with the peripherals.
• Chapter 3: RTOS - Introduction to using an RTOS with XMC7000.
• Chapter 4: DMA - Description of XMC7000 Direct Memory Access, how to use DMA.
• Chapter 5: Multicore - Learn about multicore applications on XMC7000 and inter-process communication.

Hardware

The following hardware is used for the exercises in this class:

• KIT_XMC72_EVK.
• CY8CKIT-028-SENSE shield board.

References

Additional information can be found at:

• https://www.infineon.com/cms/en/design-support/tools/sdk/modustoolbox-software
• https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/32-bit-xmc7000-industrial-microcontroller-arm-cortex-m7/