For more information and user feedback, take a look at my Thread over on egpu.io or open an issue on Github.
Distribution agnostic eGPU script that works with NVIDIA and AMD cards.
The goal of this script is to lower the barrier for Linux users to use their eGPU on the Linux Desktop. An interactive setup allows the user to choose their external GPU, which will then be automatically chosen as the primary GPU if it's connected on bootup.
This does not provide you with a plug-and-play functionality like you may know from Windows.
You still need to reboot your computer in order to connect / disconnect your eGPU..
- Your OS is running X-Server.
- You have at least pciutils 3.3.x or higher installed (check with
lspci --version). - You have at least Bash 4.x or higher installed.
- You have already authorized your Thunderbolt EGPU and are able to connect.
- You have already installed the latest (proprietary) drivers for your GPUs.
Installation and setup:
$ sudo add-apt-repository ppa:hertg/egpu-switcher
$ sudo apt update
$ sudo apt install egpu-switcher
$ sudo egpu-switcher setupUninstall:
$ apt remove egpu-switcherInstallation and setup:
$ git clone [email protected]:hertg/egpu-switcher.git
$ cd egpu-switcher
$ make install
$ sudo egpu-switcher setupUninstall:
Critical Warning: Do not use this command on any version prior to
0.10.2!
There was a critical typo in the Makefile which would delete your/usr/binfolder. Please do a manual uninstall by removing theegpu-switcherfolder in the/usr/bin/and the/usr/share/directory.
$ sudo egpu-switcher cleanup
$ make uninstallegpu-switcher setup [--override] [--noprompt]
This will generate the "xorg.conf.egpu" and "xorg.conf.internal" files and
symlink the "xorg.conf" file to one of them.
It will also create the systemd service, that runs the "switch" command on each bootup.
This will NOT delete any already existing files. If an "xorg.conf" file already exists,
it will be backed up to "xorg.conf.backup.{datetime}". This can later be reverted by
executing the "cleanup" command.
--override
If an AMD GPU or open-source NVIDIA drivers are used, the "switch" command
will prevent from switching to the eGPU if there are no displays directly attached to it.
This flag will make sure to switch to the EGPU even if there are no displays attached.
--noprompt
Prevent the setup from prompting for user interaction if there is
no existing configuration file found. (Is currently only used by the "postinst" script)
egpu-switcher switch auto|egpu|internal [--override]
Switches to the specified GPU. if the auto parameter is used, the script will check if
the eGPU is attached and switch accordingly.
The computer (or display-manager) needs to be restarted for this to take effect.
--override
If an AMD GPU or open-source NVIDIA drivers are used, the "switch" command
will prevent from switching to the eGPU if there are no displays directly attached to it.
This flag will make sure to switch to the EGPU even if there are no displays attached.
egpu-switcher cleanup [--hard]
Remove all files egpu-switcher has created previously and restore the backup
of previous "xorg.conf" files.
--hard
Remove configuration files too.
egpu-switcher config
Prompts the user to specify their external/internal GPU and saves their answer
to the configuration file.
egpu-switcher remove
Allows the user to remove their eGPU without a complete reboot.
This method will still restart the display-manager, and therefore terminate all its child-processes.
If you run into problems, please have a look at TROUBLESHOOT.md before reporting any issues.
A backup of your current
xorg.confwill be created, nothing gets deleted. If the script doesn't work for you, you can revert the changes by executingegpu-switcher cleanupor just completely uninstall the script withapt remove egpu-switcher. This will remove all files it has created and also restore your previousxorg.conffile.
This script will create two configuration files in your X-Server folder /etc/X11.
The file xorg.conf.egpu holds the settings for your EGPU and the file xorg.conf.internal holds the settings for your internal graphics.
Then a symlink xorg.conf will be generated which points to the corresponding config file, depending on wheter your egpu is connected or not.
Additionally a custom systemd service with the following content will be created.
/etc/systemd/system/egpu.service
[Unit]
Description=EGPU Service
Before=display-manager.service
After=bolt.service
[Service]
Type=oneshot
ExecStart=/usr/bin/egpu-switcher switch auto
[Install]
WantedBy=graphical.targetThis will enable the automatic detection wheter your egpu is connected or not on startup.