Makzy is the second version of the Toyzy the 3d printer it has better looks and design and even better functioning , making it more compact and fast i have used upper version of ramp for it and toyzy works good but it gets stopped working in between due to bad mounting of the parts so it needs to screwed up to get it working but yeah i wont be facing problem with this ,every single part of this made by doing proper test in real life like i have tested out shapes for the functionality
since i made my first printer i was not fully satisfied bcz it had some cons yeah i know this version may also have some problem with it but i would keep the process on going for making printer untill i get a perfect commercial level diy 3d printer bcz i want it be work globally and launch in market by which anyone can get a diy 3d printer therefore i would like thank to bluprint for a great platform to get out my atmost potential
yeah it requires many diff steps to make a 3d printer but you can make one using my provide parts and models and just assemble them or just mail me out for any help bcz i am free all the time
| Category | Part | Qty | Unit Price | Shipping | Total | Link |
|---|---|---|---|---|---|---|
| Controller Kit | Mega2560 + RAMPS 1.4 + TMC2209 Drivers + 12864 LCD | 1 | $24.00 | $11 | $35.00 | Buy Link |
| Stepper Motors | NEMA17 Stepper Motors (1.68A, 42mm) | 6 | $5.00 | $26 | $50.00 | Buy Link |
| V-Slot Extrusions | 2040 & 2020 Aluminum Profiles | — | $27.00 | $8 | $35.00 | Buy Link |
| V-Slot Wheels | Polycarbonate with bearings | 12 | $18.00 | $4 | $22.00 | Buy Link |
| Frame Joints & Mounts | 3D printed internal connectors + metal L brackets | — | $15.00 | $5 | $20.00 | Buy Link |
| Nuts and Bolts | 2–5mm assorted set | 50 | — | $20 | $5.00 | Sourced Locally |
| T8 Lead Screws (400mm) | With brass nut | 1 | $20 | $ | $20.00 | Buy Link |
| GT2 Timing Belt (5m) | 6mm width, reinforced | 1 | $2.00 | $2 | $4.00 | Buy Link |
| GT2 Pulleys (20T) | 5mm bore + screws (4 pcs) | 4 | $1.20 | $2 | $6.80 | Buy Link |
| Idler Pulleys (20T) | Smooth belt idlers | 4 | $4.00 | $2 | $6.00 | Buy Link |
| Heated Bed MK2B | 214×214mm + wiring | 1 | $14.00 | $10 | $24.00 | Buy Link |
| E3D V6 Hotend | All-metal, Volcano-ready | 1 | $18.00 | — | $10.00 | Buy Link |
| E3D Extruder | All-metal, Volcano-ready | 1 | $35.00 | — | $35.00 | Buy Link |
| Heater Cartridge (40W) | 12V ceramic | 1 | $10.00 | $1 | $11.00 | Buy Link |
| Thermistors (100K) | — | 2 | $1.00 | $1 | $3.00 | Buy Link |
| 4010 Fans | For hotend and part cooling | 3 | $2.00 | $2 | $8.00 | Buy Link |
| Mechanical Endstops | Pre-wired, pack of 3 | 3 | $0.60 | $2 | $3.80 | Buy Link |
| Power Supply (12V 20A) | Enclosed SMPS unit | 1 | $9.00 | $2 | $11.00 | Buy Link |
| Wiring & Connectors | Heatshrink, Dupont, JST, silicone wire | — | — | — | $12.00 | Sourced Locally |
| Printed Parts From Printing Legion | Corners, carriage, mounts, cover | — | — | — | $5.00 | [) |
Grand Total: ≈ $300USD For The Full Model Please Check The Latest Commited Folder