Initial commit

.gitattributes

@@ -0,0 +1,64 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+*.gpg -diff
+
+###############################################################################
+# diff behavior for common document formats
+#
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.github/.templatesyncignore

@@ -0,0 +1,3 @@
+*.ps1
+README.md
+Secrets-example.json

.github/CODEOWNERS

@@ -0,0 +1,53 @@
+# General
+*                               @Andrews-McMeel-Universal/devops-engineers
+
+# Front-end Engineering
+# *.html                          @Andrews-McMeel-Universal/front-end-engineers
+# *.lock                          @Andrews-McMeel-Universal/front-end-engineers
+# *.js                            @Andrews-McMeel-Universal/front-end-engineers
+# *.jsx                           @Andrews-McMeel-Universal/front-end-engineers
+# *.ts                            @Andrews-McMeel-Universal/front-end-engineers
+# *.tsx                           @Andrews-McMeel-Universal/front-end-engineers
+# *.css                           @Andrews-McMeel-Universal/front-end-engineers
+# *.less                          @Andrews-McMeel-Universal/front-end-engineers
+# *.scss                          @Andrews-McMeel-Universal/front-end-engineers
+# *.sass                          @Andrews-McMeel-Universal/front-end-engineers
+# *.otf                           @Andrews-McMeel-Universal/front-end-engineers
+# *.eot                           @Andrews-McMeel-Universal/front-end-engineers
+# *.ttf                           @Andrews-McMeel-Universal/front-end-engineers
+# *.woff*                         @Andrews-McMeel-Universal/front-end-engineers
+# *.svg                           @Andrews-McMeel-Universal/front-end-engineers
+# *.jpg                           @Andrews-McMeel-Universal/front-end-engineers
+# *.jpeg                          @Andrews-McMeel-Universal/front-end-engineers
+# *.gif                           @Andrews-McMeel-Universal/front-end-engineers
+# *.png                           @Andrews-McMeel-Universal/front-end-engineers
+# *.ico                           @Andrews-McMeel-Universal/front-end-engineers
+# public/**                       @Andrews-McMeel-Universal/front-end-engineers
+# src/**                          @Andrews-McMeel-Universal/front-end-engineers
+# .storybook/**                   @Andrews-McMeel-Universal/front-end-engineers
+# .browserslistrc                 @Andrews-McMeel-Universal/front-end-engineers
+# **eslint**                      @Andrews-McMeel-Universal/front-end-engineers
+# **jest**                        @Andrews-McMeel-Universal/front-end-engineers
+# **prettier**                    @Andrews-McMeel-Universal/front-end-engineers
+# **stylelint**                   @Andrews-McMeel-Universal/front-end-engineers
+# **/src/assets/**                @Andrews-McMeel-Universal/front-end-engineers
+# **/src/src/**                   @Andrews-McMeel-Universal/front-end-engineers
+# **/src/amu/**                   @Andrews-McMeel-Universal/front-end-engineers
+
+# Back-end Engineering
+# **.cs                           @Andrews-McMeel-Universal/back-end-engineers
+# **.csproj                       @Andrews-McMeel-Universal/back-end-engineers
+# **.sln                          @Andrews-McMeel-Universal/back-end-engineers
+# data/**                         @Andrews-McMeel-Universal/back-end-engineers
+# *.Library/                      @Andrews-McMeel-Universal/back-end-engineers
+# *.Tests/                        @Andrews-McMeel-Universal/back-end-engineers
+# *.WebAPI/                       @Andrews-McMeel-Universal/back-end-engineers
+# *.UnitTests/                    @Andrews-McMeel-Universal/back-end-engineers
+
+# DevOps
+.github/                        @Andrews-McMeel-Universal/devops-engineers
+deployments/                    @Andrews-McMeel-Universal/devops-engineers
+*-Secrets.ps1                   @Andrews-McMeel-Universal/devops-engineers
+Dockerfile                      @Andrews-McMeel-Universal/devops-engineers
+docker-compose.yml              @Andrews-McMeel-Universal/devops-engineers
+.nvmrc*                         @Andrews-McMeel-Universal/devops-engineers

.github/CONTRIBUTING.md

@@ -0,0 +1,21 @@
+# Contributing
+
+New branches should always be associated with a Jira ticket. The branch should be prefixed with the issue key and a short description, like so: `jiraIssueType/AMUPRODUCT-1234/hyphenated-issue-summary`.
+
+## Jira Smart Commits
+
+In scenarios where creating a separate branch for each Jira ticket is not exactly feasible, you can still trigger our automation by using what are called [smart commits](https://confluence.atlassian.com/fisheye/using-smart-commits-960155400.html).
+
+To use Jira smart commits, you would include the Jira issue key for each commit like so: `[AMUPRODUCT-1234], [AMUPRODUCT-1235] Knocked out the 4 copy edits needed`
+
+## Creating Pull Requests
+
+Once you have committed your effort in a separate branch, you will need to raise a pull request in Github. While filling out the Pull Request, **Please** follow the pull request template format and write a brief description of any technical details and Jira tickets that are related to the PR.
+
+The recommended title for the pull request is typically just the branch name. Again, if a single issue per branch is not feasible, including a brief title of the effort is acceptable.
+
+You do not need to fill in the reviewers or assignees. Our CODEOWNERS automation takes care of who will need to review it. As long as a AMU software engineer reviews it and the other checks pass, they will take care of merging the pull request into staging and production.
+
+> NOTE: On every PR, we do run tests and automatically format the code with Prettier.
+
+> NOTE: A PR will not be able to be merged until at least 1 reviewer with write access has approved it and all tests are passing. If a PR is updated with a new commit, stale reviews will be dismissed.

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,17 @@
+<!--
+We appreciate the effort for this pull request but before that please make sure you read the contribution guidelines, then fill out the blanks below.
+
+Please format the PR title appropriately based on the type of change:
+  [<issue>]: <description>
+Where <issue> is the related Jira Issue Key.
+-->
+
+## Description
+
+<!-- Provide a description here -->
+
+## Related Issues
+
+<!-- List any related Jira issues here -->
+
+- Jira Issue: PROJECT-<num>

.github/dependabot.yml

@@ -0,0 +1,84 @@
+# Please see the documentation for all configuration options:
+# https://docs.github.com/github/administering-a-repository/configuration-options-for-dependency-updates
+
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: ".github/"
+    schedule:
+      interval: "monthly"
+      day: "monday"
+    labels:
+      - "devops"
+      - "dependencies"
+    open-pull-requests-limit: 10
+    commit-message:
+      # Prefix all commit messages with 'github-actions'
+      prefix: "github-actions"
+
+  - package-ecosystem: "docker"
+    directory: "/"
+    ignore:
+      - dependency-name: node
+      - dependency-name: ruby
+      - dependency-name: dotnet/sdk
+      - dependency-name: "*"
+        update-types: ["version-update:semver-major"]
+    schedule:
+      interval: "monthly"
+      day: "monday"
+    labels:
+      - "dependencies"
+      - "devops"
+    open-pull-requests-limit: 10
+    commit-message:
+      # Prefix all commit messages with 'docker'
+      prefix: "docker"
+
+  - package-ecosystem: "npm" # for yarn
+    directory: "/" # Look for `package.json` and `lock` files in the `root` directory
+    schedule:
+      interval: "monthly"
+      day: "monday"
+    labels:
+      - "front-end"
+      - "dependencies"
+    versioning-strategy: increase
+    open-pull-requests-limit: 10
+    commit-message:
+      # Prefix all commit messages with 'npm'
+      prefix: "npm"
+
+  - package-ecosystem: bundler
+    directory: "/"
+    schedule:
+      interval: "monthly"
+      day: "monday"
+    ignore:
+      - dependency-name: nokogiri
+        versions:
+          - "> 1.12.0"
+      - dependency-name: "*"
+        update-types: ["version-update:semver-major","version-update:semver-minor"]
+    labels:
+      - "dependencies"
+    open-pull-requests-limit: 10
+    commit-message:
+      # Prefix all commit messages with 'bundler'
+      prefix: "bundler"
+
+  - package-ecosystem: "nuget"
+    directory: "/"
+    schedule:
+      interval: "monthly"
+      day: "monday"
+    ignore:
+      - dependency-name: "*"
+        update-types: ["version-update:semver-major"]
+    labels:
+      - "back-end"
+      - "dependencies"
+    open-pull-requests-limit: 10
+    commit-message:
+      # Prefix all commit messages with 'nuget'
+      prefix: "nuget"

.github/labeler.yml

@@ -0,0 +1,78 @@
+dependencies:
+  - yarn.lock
+  - package.json
+  - "**/package-lock.json"
+  - Gemfile.lock
+  - Gemfile
+  - ".ruby-version"
+  - "**/*.csproj"
+  - "**/pnpm-lock.yaml"
+
+documentation:
+  - "**/*.md"
+
+front-end:
+  - "**/*.js"
+  - "**/*.js.html"
+  - "**/*.json"
+  - "**/*.jsx"
+  - "**/*.ts"
+  - "**/*.tsx"
+  - "**/*.html"
+  - "**/*.css"
+  - "**/*.less"
+  - "**/*.scss"
+  - "**/*.sass"
+  - "**/*.otf"
+  - "**/*.eot"
+  - "**/*.ttf"
+  - "**/*.woff*"
+  - "**/*.svg"
+  - "**/*.jpg"
+  - "**/*.jpeg"
+  - "**/*.gif"
+  - "**/*.png"
+  - "**/*.ico"
+  - "public/**"
+  - "src/**"
+  - .storybook/**
+  - package.json
+  - wp-content/
+  - "!**/Secrets.json*"
+  - "!/.vscode"
+  - "!**/*.test.js"
+  - "!.github/**"
+
+back-end:
+  - "**/*.cs"
+  - "**/*.csproj"
+  - "**/*.sln"
+  - "**/**.json"
+  - "bin/"
+  - "**/*.rb"
+  - "Rakefile"
+  - "**/*.yml"
+  - "**/*.ru"
+  - "!**/Secrets.json*"
+  - "!.github/**"
+
+tools:
+  - "/.vscode"
+  - "/.devcontainer"
+
+tests:
+  - "playwright/**"
+  - "cypress/**"
+  - "**/.spec.*"
+  - "**/*.test.js"
+  - ".github/workflows/workflow-linter.yaml"
+  - ".github/actionlint.yaml"
+
+devops:
+  - ".github/**"
+  - "deployments/**"
+  - "*.ps1"
+  - "Secrets.json*"
+  - "docker-compose.yml"
+  - "Dockerfile"
+  - ".*ignore"

.github/workflows/dependabot-automations.yml

@@ -0,0 +1,32 @@
+name: Dependabot Automations
+
+on:
+  pull_request_target:
+    types: [opened, synchronize, reopened]
+    branches: [main, development]
+
+permissions:
+  pull-requests: write
+  contents: write
+  repository-projects: write
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  dependabot-automations:
+    if: ${{ github.actor == 'dependabot[bot]' }}
+    name: Dependabot PR Automations
+    uses: Andrews-McMeel-Universal/reusable_workflows/.github/workflows/dependabot-automations.yaml@2
+    with:
+      autoApprove: true
+      autoMerge: false
+
+  required-checks:
+    name: Required Checks
+    runs-on: ubuntu-latest
+    needs: [dependabot-automations]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3

.github/workflows/pr-checks.yml

@@ -0,0 +1,35 @@
+name: PR Checks
+
+on:
+  pull_request:
+    types: [opened, synchronize, reopened]
+
+jobs:
+  pr-labels:
+    if: ${{ github.actor != 'dependabot[bot]' }}
+    name: PR Labels
+    uses: Andrews-McMeel-Universal/reusable_workflows/.github/workflows/pr-labels.yaml@2
+    secrets:
+      PAT_ACTION_CI: ${{ secrets.PAT_ACTION_CI }}
+
+  codeowners-validation:
+    if: ${{ github.actor != 'dependabot[bot]' }}
+    name: Codeowners File Validation
+    uses: Andrews-McMeel-Universal/reusable_workflows/.github/workflows/codeowners-validation.yaml@2
+
+  jira-lint:
+    if: ${{ github.actor != 'dependabot[bot]' && github.actor != 'amutechtest' && github.ref != 'refs/heads/development' && github.ref != 'refs/heads/main' }}
+    name: Jira PR Linter
+    uses: Andrews-McMeel-Universal/reusable_workflows/.github/workflows/jira-lint.yaml@2
+    with:
+      fail-on-error: false
+      skip-comments: true
+    secrets:
+      JIRA_TOKEN: ${{ secrets.JIRA_TOKEN }}
+
+  lint:
+    if: ${{ github.actor != 'dependabot[bot]' }}
+    name: Simple Lint
+    uses: Andrews-McMeel-Universal/reusable_workflows/.github/workflows/simple-lint.yaml@2
+    secrets:
+      PAT_ACTION_CI: ${{ secrets.PAT_ACTION_CI }}