Blind position not updated

[Tonio16]

Hello

I would like to how to better set-up my blinds in zwavejs regarding their positioning. I am usine fibaro fgr-222.

If I start a change, the position is updated at the very begining but it keeps this value. So, at the end of the change, the value is not good.

Actually, I am refreshing it after 1min, to have the new position. It's not realy satisfaying, since with openzwave I didn't have this issue at all.
It must be a stupide mistake from me since there is no issue on this topic.
I have it since I am unsing zwave-js-ui, so more than one year, and the behavior for each version is the same.

Tx for your help

Antoine

[robertsLando]

Maybe @AlCalzone can help you here

[AlCalzone]

@Tonio16 I used to have those shutters and they reported the state just fine. Please share the associations that exist in the "groups" tab for the node. Also, a driver log, loglevel debug, from when you control the shutters. Attach the log here as a file (drag & drop into the text field).

[Tonio16]

Hello @AlCalzone

Thank you for your help. Driver log link is realy helpfull !

Association in groups

End point Group Node Target Endpoint
Root Endpoint Momentary hold NodeID_3 None
Root Endpoint Controller Updates NodeID_1 None

I made first a position change based on [22-38-0-Open] Perform a level change (Open):

2023-08-08T15:22:40.234Z DRIVER » [Node 022] [REQ] [SendData]
│ transmit options: 0x25
│ callback id: 26
└─[MultilevelSwitchCCStartLevelChange]
startLevel: 0 (ignored)
direction: up
2023-08-08T15:22:40.240Z SERIAL « [ACK] (0x06)

2023-08-08T15:23:46.515Z CNTRLR [Node 022] [Manufacturer Proprietary] fibaro[venetianBlindsPositi [Endpoint 0]
on]: metadata updated
2023-08-08T15:23:46.524Z CNTRLR [Node 022] [] [Manufacturer Proprietary] fibaro[venetianBlindsPo [Endpoint 0]
sition]: 0 => 98
2023-08-08T15:23:46.531Z CNTRLR [Node 022] [Manufacturer Proprietary] fibaro[venetianBlindsTilt]: [Endpoint 0]
metadata updated
2023-08-08T15:23:46.536Z CNTRLR [Node 022] [] [Manufacturer Proprietary] fibaro[venetianBlindsTi [Endpoint 0]
lt]: 30 => 30
2023-08-08T15:23:46.546Z DRIVER « [Node 022] [REQ] [ApplicationCommand]
└─[FibaroVenetianBlindCCReport]
position: 98
tilt: 30

The [22-38-0-currentValue] Current value stay at 0. I tried with target value from Multilevel Switch 3, from open (98) to position 50:

2023-08-08T15:24:42.503Z DRIVER » [Node 022] [REQ] [SendData]
│ transmit options: 0x25
│ callback id: 55
└─[MultilevelSwitchCCSet]
target value: 50
2023-08-08T15:24:42.506Z SERIAL « [ACK] (0x06)
2023-08-08T15:24:42.510Z SERIAL « 0x0104011301e8 (6 bytes)
2023-08-08T15:24:42.511Z SERIAL » [ACK] (0x06)
2023-08-08T15:24:42.514Z DRIVER « [RES] [SendData]
was sent: true
2023-08-08T15:24:42.527Z SERIAL « 0x0107001337000003df (9 bytes)
2023-08-08T15:24:42.528Z SERIAL » [ACK] (0x06)
2023-08-08T15:24:42.530Z DRIVER « [REQ] [SendData]
callback id: 55
transmit status: OK
2023-08-08T15:24:42.539Z CNTRLR [Node 022] [~] [Multilevel Switch] currentValue: 0 => 50 [Endpoint 0]

2023-08-08T15:24:47.608Z CNTRLR [Node 022] [~] [Multilevel Switch] currentValue: 50 => 91 [Endpoint 0]
2023-08-08T15:24:47.616Z DRIVER « [Node 022] [REQ] [ApplicationCommand]
└─[MultilevelSwitchCCReport]
current value: 91

2023-08-08T15:25:13.783Z CNTRLR [Node 022] [Manufacturer Proprietary] fibaro[venetianBlindsPositi [Endpoint 0]
on]: metadata updated
2023-08-08T15:25:13.788Z CNTRLR [Node 022] [] [Manufacturer Proprietary] fibaro[venetianBlindsPo [Endpoint 0]
sition]: 98 => 51
2023-08-08T15:25:13.793Z CNTRLR [Node 022] [Manufacturer Proprietary] fibaro[venetianBlindsTilt]: [Endpoint 0]
metadata updated
2023-08-08T15:25:13.796Z CNTRLR [Node 022] [] [Manufacturer Proprietary] fibaro[venetianBlindsTi [Endpoint 0]
lt]: 30 => 30
2023-08-08T15:25:13.801Z DRIVER « [Node 022] [REQ] [ApplicationCommand]
└─[FibaroVenetianBlindCCReport]
position: 51
tilt: 30

What we can see:
[22-38-0-currentValue] Current value is not updated only [22-145-0-fibaro-venetianBlindsPosition] Venetian blinds position is.
No position update during the move, except a first quick one for [22-38-0-currentValue] Current value. With Openzwave the position was updated during position change and not only at the end.

So, my issue is due to the fact that I was using the wrong topic, since I activated the venetian blind mode... The fact that the standard one was also updated, but only at start, didn't help me to figure this out :D

The only thing that I still feel as odd, is that there is no position update during the movement itself, like I had with openzwave.

zwavejs_2023-08-08.log

Is the parameter [23-38-0-duration] Remaining duration {"unit":"seconds"} normal? Why this one is having this { }?

Tx

Antoine

[AlCalzone]

Looks like you changed this configuration setting away from the default:

Make sure it's set to Z-Wave commands