installing

installing is very easy (i think)
dont use this until the project has been renamed to pwnhyve
artemis = pwnhyve
PLEASE let me know if you have any issues with the installation
im so tired its not even funny

kernel stuff

first, update your kernel:
sudo BRANCH=next rpi-update
reboot the pi, if it doesnt auto reboot

setup dwc2 and dtoverlay, for the usb hid gadget

echo \"dtoverlay=dwc2\" | sudo tee -a /boot/config.txt
echo \"dwc2\" | sudo tee -a /etc/modules

reboot the pi again

installing

git clone the repository:
git clone https://github.com/nototter/pwnhyve && cd pwnhyve

install bettercap; compile from source or something

install requirements: pip install -r requirements.txt

setup usb and ssh (ssh is subject to change)

sudo cp ./core/installation/pwnhyveusb /bin/ && sudo chmod +x /bin/pwnhyveusb
sudo cp ./core/installation/pwnhyvessh /bin/ && sudo chmod +x /bin/pwnhyvessh

usb module run on boot

theres different ways of doing this (cronjobs, systemctl) but i just used rc.local since it's easy and im lazy

add /bin/pwnhyveusb at the end of the file, but before the exit 0 line
for example:

# stuff n code n stuff
/bin/pwnhyveusb
exit 0

making pwnhyve to start on boot

i used systemctl since i can just do systemctl restart pwnhyve and it auto restarts you can use rc.local but it wont work as well

make a file in /bin/ called pwnhyveStart

make sure you're still in pwnhyve's folder

cp ./core/installation/startup.sh /bin/
mv /bin/startup.sh /bin/pwnhyveStart
pwd # save the output of this command, in your memory or ctrl+c
chmod +x /bin/pwnhyveStart
nano /bin/pwnhyveStart

replace all %cwd% in the file with your pwd value eventually ill make it use variables, maybe

now for the final part

cp ./core/installation/pwnhyve.service /etc/systemd/system/
systemctl enable pwnhyve.service

now reboot your pi or do systemctl start pwnhyve.service

congradulations on ur new pi with pwnhyve installed
report any issues on the github, or any suggestions