8812au.conf

# /etc/modprobe.d/8812au.conf
#
# Purpose: Allow easy access to specific driver options.
#
# Edit the following line to change options:
options 8812au rtw_drv_log_level=0 rtw_vht_enable=1 rtw_power_mgnt=1 rtw_beamform_cap=10 rtw_switch_usb_mode=2
#
# After editing is complete, save this file (if using nano: Ctrl+X, Y, Enter)
# and reboot to activate the changes.
#
# Documentation:
#
# -----
#
# Log level options: ( rtw_drv_log_level )
#
# 0 = NONE (default)
# 1 = ALWAYS
# 2 = ERROR
# 3 = WARNING
# 4 = INFO
# 5 = DEBUG
# 6 = MAX
#
# Note: You can save a log file that only includes RTW log entries by running
# the following in a terminal:
#
# $ sudo ./save-log.sh
#
# -----
#
# VHT enable options: ( rtw_vht_enable )
#
#  0 = Disable
#  1 = Enable (default)
#  2 = Force auto enable (use caution)
#
# Notes:
# - Unless you know what you are doing, don't change the default.
# - A non-default setting can degrade performance greatly in managed mode.
# - For 5GHz AP mode, such as when you are using hostapd, setting this
#   option to 2 will allow 80 MHz channel width.
#
# -----
#
# Power management options: ( rtw_power_mgnt )
#
# 0 = Disable power saving
# 1 = Power saving on, minPS (default)
# 2 = Power saving on, maxPS
#
# -----
#
# Beamforming options: ( rtw_beamform_cap )
#
# 0 = Disable
# 1 = SU Beamformer
# 2 = SU Beamformee
# 3 = SU Beamformer and SU Beamformee
# 10= SU Beamformee and MU Beamformee (default)
# 11= SU Beamformer and SU Beamformee and MU Beamformee
#
# Note: MU Beamformer not supported.
#
# -----
#
# USB mode options: ( rtw_switch_usb_mode )
#
# 0 = No switch
# 1 = Switch from usb 2.0 to usb 3.0
# 2 = Switch from usb 3.0 to usb 2.0 (default)
#
# Notes:
# - When using the 2.4 GHz band in AP mode, use the default setting.
# - When using the 5 GHz band in AP mode, use rtw_switch_usb_mode=1.
#
# -----
#
# To see all options that are available:
#
# $ ls /sys/module/8812au/parameters/
#
# -----
#
# To see the values that are in use:
#
# $ grep [[:alnum:]] /sys/module/8812au/parameters/*
#
# -----