We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Release: 1.5.0 Hash: a6a6a6
N/A, not OS specific
Ex: Prior steps taken / Documentation Followed / etc...
Hammer fails in setup_verilog step since it expects certain lines to be found in the Verilog that are not present in this PDK version.
setup_verilog
Specifically an issue with installing an incorrect PDK version in the tutorial:
chipyard/docs/VLSI/Sky130-Commercial-Tutorial.rst
Line 63 in 09c18c8
Hammer should successfully modify the verilog files and run with the SKY 130 PDK.
@nayiri-k has a working version of the PDK on BWRC, but not sure whether that version is on conda.
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Background Work
Chipyard Version and Hash
Release: 1.5.0
Hash: a6a6a6
OS Setup
N/A, not OS specific
Other Setup
Ex: Prior steps taken / Documentation Followed / etc...
Current Behavior
Hammer fails in
setup_verilog
step since it expects certain lines to be found in the Verilog that are not present in this PDK version.Specifically an issue with installing an incorrect PDK version in the tutorial:
chipyard/docs/VLSI/Sky130-Commercial-Tutorial.rst
Line 63 in 09c18c8
Expected Behavior
Hammer should successfully modify the verilog files and run with the SKY 130 PDK.
Other Information
@nayiri-k has a working version of the PDK on BWRC, but not sure whether that version is on conda.
The text was updated successfully, but these errors were encountered: