c++11 header files that can be used by your c++ programs
-
Updated
Dec 31, 2019 - C++
c++11 header files that can be used by your c++ programs
STM32H747I-DISCO_I2C_SD is an STM32CubeIDE project. It takes embeded sensor readings using I2C from STM32H747I DISCO board and store all the readings in the SD card. The SD card should be inside the card slot for this code to work properly.
A NETMF library for the Digital Compass solution HMC6352
Data logger using a ESP8266, DHT21 for temp and Hum, and a CCS811 for air quality
Repository containing the code for senior design project. OpenThread-based sensor network using MQTT.
Este proyecto consiste en un código escrito en C++ para utilizar en la tarjeta Nucleo L476RG para el control de tres esclavos por I2C. Y un código en python que se utiliza para monitorear y controlar distintos aspectos de un sistema a través de una interfaz gráfica de usuario (GUI) creada con Tkinter.
Arduino Oled i2c
Weather station shows temperature and humidity gathered from single SHTC3 sensor. Uses SSD1306 as a display.
p12347 Sensor for library
The scripts are collecting data from IoT sensors and storing, displaying and sending it to a remote monitoring system.
A 3-axis magnetometer board based on Infineon TLV493D 3D magnetic sensor
Arduino interface for i2c sensors with Serial CSV output for use with Data Aquisition Software
I2C address translator module, allows connection of multiple I2C devices with the same address to one bus.
An arduino project to allow the connection of Wii accessories as USB HID game controller devices using UnoJoy and Wire (I2C). Nunchucks and arcade sticks are supported and tested, classic game controller support is untested. Update rate is approximately 100Hz.
Code to access an AM2320 via i2c on Raspberry Pi
Read TSL2561 through Python3 on raspberry pi
Arduino library for the I²C Sonar Range Finder SRF08.
voltage and current measuring ADC with I2C interface
Add a description, image, and links to the i2c-sensors topic page so that developers can more easily learn about it.
To associate your repository with the i2c-sensors topic, visit your repo's landing page and select "manage topics."