Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Custom USB shows disappear on M3 Highland #109

Open
eried opened this issue Oct 15, 2024 · 8 comments
Open

Custom USB shows disappear on M3 Highland #109

eried opened this issue Oct 15, 2024 · 8 comments

Comments

@eried
Copy link

eried commented Oct 15, 2024

I have tried with multiple usb drives (multiple/single partitions, fat32 vs exfat) and I think there is an issue on the latest m3 highland software that makes the custom shows disappear.

It always work after rebooting the car, waiting 30-40 seconds, custom lightshows appear, boombox custom horns and everything is fine. After a while, the custom lightshows disappear but the boombox and tesladrive are fine.

Anyone else here with this issue?

@danfratamico
Copy link

danfratamico commented Oct 16, 2024

I just tried to load multiple light shows on a partitioned drive, labeling each as Show1.fseq/Show1.mp3, Show2.fseq/Show2.mp3, etc. but the custom light show button is greyed out. If I put one light show on the USB and label it as lightshow.fseq and lightshow.wav, it works. I'm on 2024.32.7.

@eried
Copy link
Author

eried commented Oct 16, 2024

I just tried to load multiple light shows on a partitioned drive, labeling each as Show1.fseq/Show1.mp3, Show2.fseq/Show2.mp3, etc. but the custom light show button is greyed out. If I put one light show on the USB and label it as lightshow.fseq and lightshow.wav, it works. I'm on 2024.32.7.

Hey, thanks I will try with a single show. I'm pretty sure I tried renaming to that name in my tests but I had a .mp3

@eried
Copy link
Author

eried commented Oct 16, 2024

@danfratamico I just tried with an empty usb only with the LightShow folder and lightshow.fseq/lightshow.wav files and does not work, for me it only works for a while after a reboot. Reboot -> wait 30 secs -> custom lightshows appear OK. Boombox and tesladrive that is on the same drive always work OK, it is only the custom lightshows not appearing 😐

@eried
Copy link
Author

eried commented Oct 23, 2024

I think this is a bug all model 3 highland (it is ok since this functionality is very low priority, but strange either way)

https://teslamotorsclub.com/tmc/posts/8467202/
https://www.reddit.com/r/TeslaLightShow/comments/1g6f21l/comment/lsj412y/?context=3

@clark-cheng
Copy link

clark-cheng commented Oct 27, 2024

In my case (cubertruck), I was able to upload and played 2 customs songs/show last week. But 2-3 days later, system has not been able to locate the customs songs. (Grey)

Tried another flash disk (formatted on Tesla), tried to reboot, and also tried to have 1 song (2 files)…. not working….

@eried
Copy link
Author

eried commented Oct 28, 2024

Tried another flash disk (formatted on Tesla), tried to reboot, and also tried to have 1 song (2 files)…. not working….

For what I have observed is,

  1. remove the flash disk
  2. reboot car holding the two knobs down
  3. wait 30 seconds and connect it again

it will work until few more rides, maybe unlocking/locking the car is messing the loading of shows? (if boombox and teslacam are in the same flash disk, on other partitions, they will be ok, it is just the lightshows)

@denis-rafailov
Copy link

Tried another flash disk (formatted on Tesla), tried to reboot, and also tried to have 1 song (2 files)…. not working….

For what I have observed is,

  1. remove the flash disk
  2. reboot car holding the two knobs down
  3. wait 30 seconds and connect it again

it will work until few more rides, maybe unlocking/locking the car is messing the loading of shows? (if boombox and teslacam are in the same flash disk, on other partitions, they will be ok, it is just the lightshows)

Can I simulate the falure without a car? I am looking for a ticket that could make my hands dirty without a car
.

@eried
Copy link
Author

eried commented Nov 15, 2024

can you simulate the OS without a car? I guess it is just mounting and unmounting the USB drive?

I dont understand why the lightshow partition is the only one that stops working, while boombox and teslacam on the same USB drive are perfectly fine.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

4 participants