Replies: 4 comments 1 reply
-
You forgot a slash here. Should be |
Beta Was this translation helpful? Give feedback.
-
@diktus
also need to config this
then reload it should be work, when you connect from client you should use your domain name as server address. Also make sure grant acees to port 500 and 4500 udp and tcp for ipv4 and ipv6 If there is any connecting issue (If clinet connection error) you can debug logs with |
Beta Was this translation helpful? Give feedback.
-
hello, sorry to up this message but I have a similar trouble ... there is a tunnel and for ipv4 it works but not for ipv6 my ipsec.conf
when my tunnel is up , I can see my ipv4 address but not my ipv6
when I check my configuration :
so it seems client have a ipv6 ip but I can't ping it and there is nothing on ip -6 neigh when I do a tcpdump, I can see flow in IN interface but there is no OUT. if I check the ip6table -nvL, counter is still 0
if someone could help me, it ll make me happy :) thanks |
Beta Was this translation helpful? Give feedback.
-
@alwismt thanks. I faced similar issue and your code help me fix it. |
Beta Was this translation helpful? Give feedback.
-
Hi,
I have working storngswan for IPV4 but when i check on ipv6-test the IPV6 say not support. I would like pass the traffic for IPV6 to the server so the IP address for IPV6 will use IPV6 of the server.
here my config
when i check with ipsec status all
i also have enable forwarding for IPv6 using UFW on Ubuntu. here the config for /etc/ufw/before.rules.
Please help how to make the traffic for IPV6 pass to the server.
Thank You
Beta Was this translation helpful? Give feedback.
All reactions