Wrong disk temperature for ssd

[keikari]

Temperature shown for my SSD (KINGSTON_SA400S37240G) is 97°C-98°C. When correct temp is usually 28°C-33°C. It shows correct temp for my HDD.
I hope this is correct place and way to inform this. (And correct program)
I have no idea what kind of info I should add.

[tbzatek]

Could you please provide output of udisksctl dump and smartctl -a /dev/sda? Most likely this is either malformed SMART structure reported by the drive or some libatasmart issue. Nothing unusual sadly.

[keikari]

Here
smartctl_sda.txt
udisk_dump.txt

[tbzatek]

Thanks, so the drive actually provides two temperature attributes - SMART ID 194 (31 deg. C) and ID 231 (97). Looks like we either need to tweak the attribute priority or provide a quirk for this drive model.

[keikari]

I forgot to mention that my udisks version is 2.7.6, if it happens to matter (current fedora version)

[elpop]

Same here:

[pop@pop ~]$ hddtemp /dev/sda
/dev/sda: KINGSTON SA400S37480G: 56°C
[pop@pop ~]$ sudo smartctl -a /dev/sda | grep 194
194 Temperature_Celsius 0x0022 044 060 000 Old_age Always - 56 (Min/Max 23/60)

but udisk2 show 100c

the values is for the parm 231 (SSD_Life_Left)

Exists a param (udisks2.conf) to asigne register 194 to the temp attribute?
all under Fedora 30, Kernel 5.1.6-300.fc30.x86_64 with udisks2 version 2.8.2-1.fc30.x86_64

[sharkguto]

same issue here with ubuntu 20.04

[seb128]

The issue seems to be a libatasmart one, reported in https://bugs.freedesktop.org/show_bug.cgi?id=97446

There is an Ubuntu bug with some extra context and explanations where
Trent Nelson (trent-a-b-nelson) attached a patch to add a quirk
https://bugs.launchpad.net/ubuntu/+source/libatasmart/+bug/1581594/comments/16

The freedesktop bugzilla is locked down but libatasmart doesn't seem to have migrated to gitlab, unsure what's the right way to get a fix landed there?

[t-nelson]

👋

[boredazfcuk]

I'm seeing this too:

Smart is showing correct temperature:

>smartctl --all /dev/sda | grep "^190\|^194"
194 Temperature_Celsius     0x0023   067   067   000    Pre-fail  Always       -       33 (Min/Max 33/33)

...but udisksctl does not:

>udisksctl dump | grep "Model:\|SmartTemp"
    Model:                      Patriot Burst
    SmartTemperature:                           372.15000000000003
    Model:                      ST6000VN0033-2EE110
    SmartTemperature:                           301.15000000000003
    Model:                      TOSHIBA MQ01ABD050
    SmartTemperature:                           307.15000000000003
    Model:                      WDC WD40EFRX-68WT0N0
    SmartTemperature:                           298.15000000000003

Got the same problem, it is always the same numbers in GNOME Disks even after the re-install of Arch.

[bayasdev]

Same problem on Arch Linux

hddtemp reports correct readings

smartctl

Kingston A400 firmware is updated to version SBFKB1H5

[devbapidey]

Same problem here. Confirmed in gnome-disk.

Getting

udisksctl info -d KINGSTON_Bla..Bla..Bla..
SmartTemperature: 362.15000000000003 ( I think that is kelvin? )

By the way gnome-disk show me 192 ℉ for kingston.

For WDC_Bla..Bla...
SmartTemperature: 309.15000000000003 getting 97℉ in gnome-disk.

Come on do fix it.

[mohamedation]

this is still an issue.

[michael-andreev]

Same problem with KINGSTON SA400S37120G on Ubuntu 20.04. Another drive (WDC WD60PURZ-85ZUFY1) shows correct temperature.

[chutetearer]

Same problem here too with a KINGSTON SA400S37480G on Mint 20.1 (Kernel Linux 5.4.0-65-generic x86_64)