You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hello,
sadly the library seems to be broken on the RP2040 architecture:
While the midi demo works, the mp3 demo plays the sample only one time, the second time a short click and then silence. The serial output works, so there is no freeze. Maybe the MP3playerDemo is broken on other architectures also? Have no ESP32 right here to check it out.
I modified the main loop with complete reinitialize the modul: hard reset and spi end/begin, without success:
sample played one time, then a short "click" and nothing.
#define VS1053_CS 6
#define VS1053_RST 7
#define VS1053_DCS 8
#define VS1053_DREQ 9
// This ESP_VS1053_Library
#include <VS1053Driver.h>
#include <VS1053SPI.h>
// Please find SampleMp3.h file here:
// github.com/baldram/ESP_VS1053_Library/blob/master/examples/Mp3PlayerDemo/SampleMp3.h
#include "SampleMp3.h"
#define UNDEFINED -1
#define VOLUME 100 // volume level 0-100
VS1053 player(VS1053_CS, VS1053_DCS, VS1053_DREQ, UNDEFINED, SPI);
void setup() {
pinMode(VS1053_RST, OUTPUT);
digitalWrite(VS1053_RST, 0);
delay(10);
digitalWrite(VS1053_RST, 1);
Serial.begin(115200);
// initialize SPI
SPI.begin();
player.begin();
if (player.getChipVersion() == 4) { // Only perform an update if we really are using a VS1053, not. eg. VS1003
player.loadDefaultVs1053Patches();
}
player.setVolume(VOLUME);
player.switchToMp3Mode();
// player.beginOutput();
player.setVolume(VOLUME);
}
void loop() {
Serial.println("Playing sound... ");
// play mp3 flow each 3s
player.writeAudio(sampleMp3, sizeof(sampleMp3));
delay(3000);
player.stopSong();
player.end();
player.hardReset();
digitalWrite(VS1053_RST, 0);
delay(10);
digitalWrite(VS1053_RST, 1);
SPI.end();
delay(10);
SPI.begin();
delay(10);
player.begin();
if (player.getChipVersion() == 4) { // Only perform an update if we really are using a VS1053, not. eg. VS1003
player.loadDefaultVs1053Patches();
}
player.switchToMp3Mode();
player.startSong();
player.setVolume(VOLUME);
delay(10);
}
The text was updated successfully, but these errors were encountered:
I'm not sure if it's related but on the rp2040 pico (no wifi) I had the driver not intializing consistently with some sketches.
I added (line 122) do VS1053Driver.cpp:
111 bool VS1053::testComm(const char *header) {
112 // Test the communication with the VS1053 module. The result will be returned.
113 // If DREQ is low, there is problably no VS1053 connected. Pull the line HIGH
114 // in order to prevent an endless loop waiting for this signal. The rest of the
115 // software will still work, but readbacks from VS1053 will fail.
116 int i; // Loop control
117 uint16_t r1, r2, cnt = 0;
118 uint16_t delta = 300; // 3 for fast SPI
119 delay(300);
120 VS1053_LOGW("is dreq there?");
121
122 data_mode_on();
It's a bit odd. I'm using configs with the audio-tools from the same author and used his recommended (?) pins:
Hello,
sadly the library seems to be broken on the RP2040 architecture:
While the midi demo works, the mp3 demo plays the sample only one time, the second time a short click and then silence. The serial output works, so there is no freeze.
Maybe the MP3playerDemo is broken on other architectures also? Have no ESP32 right here to check it out.
used core:
https://github.com/earlephilhower/arduino-pico
working reference:
https://github.com/episource/ESP_VS1053_Library
used modul: VS1053B (red breakout board)
I modified the main loop with complete reinitialize the modul: hard reset and spi end/begin, without success:
sample played one time, then a short "click" and nothing.
The text was updated successfully, but these errors were encountered: