Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Under PlatformIO, debug rp2040 with "rp2040 dap" is ok, but download shows error. #34

Open
kylongmu opened this issue May 10, 2022 · 8 comments
Open

Under PlatformIO, debug rp2040 with "rp2040 dap" is ok, but download shows error. #34

kylongmu opened this issue May 10, 2022 · 8 comments

Comments

@kylongmu
Copy link

Make a "rp2040 dap" with this , and use it to debug another rp2040 is very cool, debug is OK, but download shows error.
This is my platform.ini:

[env:upstream_develop]
platform = https://github.sunflyer.cn/platformio/platform-raspberrypi.git
framework = arduino
board = pico

board_build.f_cpu = 120000000L
debug_tool = cmsis-dap
upload_protocol = cmsis-dap
debug_speed = 1000000

This is the upload log:

> Executing task in folder 220428-141324-arduino-blink: C:\Users\THINKPAD\.platformio\penv\Scripts\platformio.exe run --target upload <

Processing upstream_develop (platform: https://github.sunflyer.cn/platformio/platform-raspberrypi.git; framework: arduino; board: pico)
----------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/raspberrypi/pico.html
PLATFORM: Raspberry Pi RP2040 (1.6.0+sha.e08da69) > Raspberry Pi Pico
HARDWARE: RP2040 120MHz, 264KB RAM, 2MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, jlink, raspberrypi-swd)
PACKAGES:
 - framework-arduino-mbed 3.0.1
 - tool-openocd-raspberrypi 2.1100.0 (11.0)
 - tool-rp2040tools 1.0.2
 - toolchain-gccarmnoneeabi 1.90201.191206 (9.2.1)
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 37 compatible libraries
Scanning dependencies...
Dependency Graph
|-- <SPI>
Building in release mode
Checking size .pio\build\upstream_develop\firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [==        ]  17.0% (used 45844 bytes from 270336 bytes)
Flash: [          ]   0.2% (used 4322 bytes from 2097152 bytes)
Configuring upload protocol...
AVAILABLE: cmsis-dap, jlink, picotool, raspberrypi-swd
CURRENT: upload_protocol = cmsis-dap
Uploading .pio\build\upstream_develop\firmware.elf
Open On-Chip Debugger 0.11.0+dev-gec0240e6a-dirty (2021-03-09-09:44)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 1

adapter speed: 1000000 kHz

target halted due to debug-request, current mode: Thread 
xPSR: 0xf1000000 pc: 0x000000ea msp: 0x20041f00
target halted due to debug-request, current mode: Thread
xPSR: 0xf1000000 pc: 0x000000ea msp: 0x20041f00
** Programming Started **
Warn : no flash bank found for address 0x10000000
Warn : no flash bank found for address 0x10013fa0
** Programming Finished **
** Verify Started **
Warn : target was in unknown state when halt was requested
Error: timed out while waiting for target halted
Error: error executing cortex_m crc algorithm
Error: checksum mismatch - attempting binary compare
embedded:startup.tcl:530: Error: ** Verify Failed **
in procedure 'program' 
in procedure 'program_error' called at file "embedded:startup.tcl", line 591
at file "embedded:startup.tcl", line 530
*** [upload] Error 1
========================================================= [FAILED] Took 5.58 seconds ====================================
@ivankravets ivankravets transferred this issue from platformio/platformio-core May 10, 2022
@kylongmu kylongmu mentioned this issue May 10, 2022
Closed
@maxgerhardt
Copy link
Contributor

Error: checksum mismatch - attempting binary compare I've experienced this error too when using a too high programming speed.

debug_speed = 1000000

this value is in khz. 1 million killohertz is a gigahertz. Please set debug_sped = 1000 and retry debugging, or try out the PR #36, it also respects the speed when using a regular upload.

@kylongmu
Copy link
Author

Error: checksum mismatch - attempting binary compare I've experienced this error too when using a too high programming speed.

debug_speed = 1000000

this value is in khz. 1 million killohertz is a gigahertz. Please set debug_sped = 1000 and retry debugging, or try out the PR #36, it also respects the speed when using a regular upload.

But the download is not work also, this is the output with debug_sped = 1000

RAM:   [==        ]  17.3% (used 46672 bytes from 270336 bytes)
Flash: [          ]   0.2% (used 4346 bytes from 2097152 bytes)
Configuring upload protocol...
AVAILABLE: cmsis-dap, jlink, picotool, raspberrypi-swd
CURRENT: upload_protocol = cmsis-dap
Uploading .pio\build\upstream_develop\firmware.elf
Open On-Chip Debugger 0.11.0+dev-gec0240e6a-dirty (2021-03-09-09:44)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 1

adapter speed: 1000 kHz

target halted due to debug-request, current mode: Thread 
xPSR: 0xf1000000 pc: 0x000000ea msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0xf1000000 pc: 0x000000ea msp: 0x20041f00
** Programming Started **
Warn : no flash bank found for address 0x10000000
Warn : no flash bank found for address 0x10016ad8
** Programming Finished **
** Verify Started **
target halted due to debug-request, current mode: Thread 
xPSR: 0x81000000 pc: 0x1000c9ac psp: 0x20008838
Error: checksum mismatch - attempting binary compare
embedded:startup.tcl:530: Error: ** Verify Failed **
in procedure 'program' 
in procedure 'program_error' called at file "embedded:startup.tcl", line 591
at file "embedded:startup.tcl", line 530
*** [upload] Error 1
======================================================== [FAILED] Took 23.32 seconds ========================================================

@maxgerhardt
Copy link
Contributor

maxgerhardt commented Jun 10, 2022 •
edited

Can you try to go even lower, like 100kHz?

Warn : no flash bank found for address 0x10000000
Warn : no flash bank found for address 0x10016ad8

Those don't look good.

@maxgerhardt
Copy link
Contributor

Does this also occur when using the Picoprobe firmware (https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html#debugging-using-another-raspberry-pi-pico) and configuration? (upload_protocol = picoprobe and wire them up like seen in https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf page 61)

@maxgerhardt
Copy link
Contributor

Instead of using platform = https://github.sunflyer.cn/platformio/platform-raspberrypi.git you can try using platform = https://github.com/maxgerhardt/platform-raspberrypi.git, so that you have a more up-to-date openocd version and picoscope support. Maybe that fixes it already.

@kylongmu
Copy link
Author

With 100k download:

Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [==        ]  17.3% (used 46672 bytes from 270336 bytes)
Flash: [          ]   0.2% (used 4346 bytes from 2097152 bytes)
Configuring upload protocol...
AVAILABLE: cmsis-dap, jlink, picotool, raspberrypi-swd
CURRENT: upload_protocol = cmsis-dap
Uploading .pio\build\upstream_develop\firmware.elf
Open On-Chip Debugger 0.11.0+dev-gec0240e6a-dirty (2021-03-09-09:44)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 1

adapter speed: 100 kHz

target halted due to debug-request, current mode: Thread 
xPSR: 0xf1000000 pc: 0x000000ea msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0xf1000000 pc: 0x000000ea msp: 0x20041f00
** Programming Started **
Warn : no flash bank found for address 0x10000000
Warn : no flash bank found for address 0x10016ad8
** Programming Finished **
** Verify Started **
target halted due to debug-request, current mode: Thread 
xPSR: 0x81000000 pc: 0x1000c9ac psp: 0x20008838
Error: checksum mismatch - attempting binary compare
embedded:startup.tcl:530: Error: ** Verify Failed **
in procedure 'program' 
in procedure 'program_error' called at file "embedded:startup.tcl", line 591
at file "embedded:startup.tcl", line 530
*** [upload] Error 1
======================================================== [FAILED] Took 38.31 seconds ========================================================

And can't enter debug mode with 100k

@kylongmu
Copy link
Author

Instead of using platform = https://github.sunflyer.cn/platformio/platform-raspberrypi.git you can try using platform = https://github.com/maxgerhardt/platform-raspberrypi.git, so that you have a more up-to-date openocd version and picoscope support. Maybe that fixes it already.

This is OK:

Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [==        ]  17.3% (used 46672 bytes from 270336 bytes)
Flash: [          ]   0.2% (used 4346 bytes from 2093056 bytes)
Configuring upload protocol...
AVAILABLE: cmsis-dap, jlink, picoprobe, picotool, raspberrypi-swd
CURRENT: upload_protocol = cmsis-dap
Uploading .pio\build\upstream_develop\firmware.elf
Open On-Chip Debugger 0.11.0-g610f137 (2022-02-11-13:57)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 1

adapter speed: 1000 kHz

target halted due to debug-request, current mode: Thread 
xPSR: 0xf1000000 pc: 0x000000ea msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0xf1000000 pc: 0x000000ea msp: 0x20041f00
** Programming Started **
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
** Programming Finished **
** Verify Started **
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000184 msp: 0x20041f00
** Verified OK **
** Resetting Target **
shutdown command invoked
======================================================== [SUCCESS] Took 33.74 seconds ========================================================

Thanks a lot!

@maxgerhardt
Copy link
Contributor

Then the issue will be fixed once #36 is merged.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@maxgerhardt @kylongmu